This paper introduces a launch vehicle scheme for the new generation of cryogenic and quick-launch launch vehicle(LM-6). The main technical innovations of LM-6 launch vehicle include the capability of twenty satellite...This paper introduces a launch vehicle scheme for the new generation of cryogenic and quick-launch launch vehicle(LM-6). The main technical innovations of LM-6 launch vehicle include the capability of twenty satellites launched by one vehicle, high-pressure staged combustion cycle engine and oxygen tank self-pressurization, sandwich bulkhead tank with 200 K temperature difference, and 7-day quick-launch using the "three horizontals" test and launch mode with integral transportation and erection. The future development of the quick-launch launch vehicle is predicted based upon the need for vehicle mission coverage improvement, better response speed, and stronger market competiveness.展开更多
In order to obtain the dynamic characteristics of a differential piston warm gas selfpressurization system for liquid attitude and divert propulsion system, a transient model is developed using the modular modeling me...In order to obtain the dynamic characteristics of a differential piston warm gas selfpressurization system for liquid attitude and divert propulsion system, a transient model is developed using the modular modeling method. The system includes the solid start cartridge,pressure-amplified tank with liquid monopropellant, liquid regulator, gas generator, and pipes.The one-dimensional finite-element state-variable model is applied to the pipes and the lumped parameter method is adopted for the other modules. The variations of the system operation parameters over time during the startup, steady-state, and pulsing operational processes are obtained from the transient model, and the characteristics of starting time changing with different system parameters are also analyzed. It is shown that the system startup process can be divided into three distinct processes. The starting time monotonically changes with variations of the liquid regulator parameters, first decreasing and then increasing with the mass change of the solid propellant charge of the start cartridge, initial gas cavity volume of the pressure amplified tank and initial gas cushion of the propellant tank. The starting time can be reduced to less than 1.0 s（0.68–0.75 s for the current system）. For meeting the deviation requirements of ±10% of the steady-state propellant tank pressure, the positive deviation requirement is assured by the self-locking pressure and the negative deviation can be assured within an allowable maximum propellant tank volume flowrate（1.6 times the design value for the proposed system） for downstream thrusters for a designed system. The results from the simulation are useful as a guide for further system design and testing.展开更多
本文基于液氢综合测试平台(Multi-Purpose Hydrogen Test Bed,MHTB)储罐测试结果,对比分析了饱和均质模型、俄罗斯模型和三区模型对自增压过程动态模拟的适用性,对比结果表明三区模型具有相对较高的准确性:三区模型针对50%初始充满率,漏...本文基于液氢综合测试平台(Multi-Purpose Hydrogen Test Bed,MHTB)储罐测试结果,对比分析了饱和均质模型、俄罗斯模型和三区模型对自增压过程动态模拟的适用性,对比结果表明三区模型具有相对较高的准确性:三区模型针对50%初始充满率,漏热18.7 W时,在20.57 h时刻的增压模拟值与实验值偏差为7.38%。基于三区模型,结合热力学分析和无量纲化处理,量化分析了自增压过程中温度、压缩因子和密度对增压的贡献程度,解释了MHTB储罐初始压力骤增的主要原因是气相区的迅速过热与温度升高。本文可为液氢存储自增压过程的动态特性模拟提供理论指导。展开更多
Nitrous oxide(N_(2)O)is a green propellant with excellent application prospects.A subNewton N_(2)O monopropellant thruster with inner-heater and a N_(2)O self-pressurization stable supply system with regenerative heat...Nitrous oxide(N_(2)O)is a green propellant with excellent application prospects.A subNewton N_(2)O monopropellant thruster with inner-heater and a N_(2)O self-pressurization stable supply system with regenerative heat compensation are designed in this paper.The experimental research of the thruster is described,including measurements of preheating power,activation temperature,vacuum thrust,specific impulse,life-span and pulsed operation performance.By inserting the heater into the catalyst-bed,preheating efficiency of the heater is significantly improved compared to the thruster with outer-heater.Thus,the preheating power demand of the thruster is successfully reduced to around 10 W.The mean vacuum thrust of 322 mN is attained and the corresponding specific impulse reaches 162s at the mass flow rate of 0.2 g/s.Successful activation temperature of 523 K is achieved,and the activation performance of the thruster is affected by the loading factor.A long term hot-firing test longer than 12000 s is attained.The pulsed operation performance of the inner-preheating thruster is also studied by measuring chamber pressure.Impulses with different magnitudes are produced by adjusting the opening duration of the control valve.A minimum impulse of 81 mN·s is attained.Finally,the performance of the thruster is evaluated by comparison with other thrusters of the same type.The results indicate that the proposed thruster with inner-heater is superior in terms of preheating power,activation temperature and specific impulse performance.展开更多
文摘This paper introduces a launch vehicle scheme for the new generation of cryogenic and quick-launch launch vehicle(LM-6). The main technical innovations of LM-6 launch vehicle include the capability of twenty satellites launched by one vehicle, high-pressure staged combustion cycle engine and oxygen tank self-pressurization, sandwich bulkhead tank with 200 K temperature difference, and 7-day quick-launch using the "three horizontals" test and launch mode with integral transportation and erection. The future development of the quick-launch launch vehicle is predicted based upon the need for vehicle mission coverage improvement, better response speed, and stronger market competiveness.
文摘In order to obtain the dynamic characteristics of a differential piston warm gas selfpressurization system for liquid attitude and divert propulsion system, a transient model is developed using the modular modeling method. The system includes the solid start cartridge,pressure-amplified tank with liquid monopropellant, liquid regulator, gas generator, and pipes.The one-dimensional finite-element state-variable model is applied to the pipes and the lumped parameter method is adopted for the other modules. The variations of the system operation parameters over time during the startup, steady-state, and pulsing operational processes are obtained from the transient model, and the characteristics of starting time changing with different system parameters are also analyzed. It is shown that the system startup process can be divided into three distinct processes. The starting time monotonically changes with variations of the liquid regulator parameters, first decreasing and then increasing with the mass change of the solid propellant charge of the start cartridge, initial gas cavity volume of the pressure amplified tank and initial gas cushion of the propellant tank. The starting time can be reduced to less than 1.0 s（0.68–0.75 s for the current system）. For meeting the deviation requirements of ±10% of the steady-state propellant tank pressure, the positive deviation requirement is assured by the self-locking pressure and the negative deviation can be assured within an allowable maximum propellant tank volume flowrate（1.6 times the design value for the proposed system） for downstream thrusters for a designed system. The results from the simulation are useful as a guide for further system design and testing.
文摘Nitrous oxide(N_(2)O)is a green propellant with excellent application prospects.A subNewton N_(2)O monopropellant thruster with inner-heater and a N_(2)O self-pressurization stable supply system with regenerative heat compensation are designed in this paper.The experimental research of the thruster is described,including measurements of preheating power,activation temperature,vacuum thrust,specific impulse,life-span and pulsed operation performance.By inserting the heater into the catalyst-bed,preheating efficiency of the heater is significantly improved compared to the thruster with outer-heater.Thus,the preheating power demand of the thruster is successfully reduced to around 10 W.The mean vacuum thrust of 322 mN is attained and the corresponding specific impulse reaches 162s at the mass flow rate of 0.2 g/s.Successful activation temperature of 523 K is achieved,and the activation performance of the thruster is affected by the loading factor.A long term hot-firing test longer than 12000 s is attained.The pulsed operation performance of the inner-preheating thruster is also studied by measuring chamber pressure.Impulses with different magnitudes are produced by adjusting the opening duration of the control valve.A minimum impulse of 81 mN·s is attained.Finally,the performance of the thruster is evaluated by comparison with other thrusters of the same type.The results indicate that the proposed thruster with inner-heater is superior in terms of preheating power,activation temperature and specific impulse performance.
