In the paper results of passive tomography calculations have been presented to assess rockburst hazard and locate high seismic activity zones in the vicinity of longwall 306 in Zabrze Bielszowice coal mine. The area o...In the paper results of passive tomography calculations have been presented to assess rockburst hazard and locate high seismic activity zones in the vicinity of longwall 306 in Zabrze Bielszowice coal mine. The area of study was 1000 m in X direction by 900 m in Y direction. The zones of high values of P-wave propagation velocity have been found to correlate with the distribution of large seismic tremors.展开更多
To analyze and predict the mechanical behaviors of deep hard rocks,some key issues concerning rock fracturing mechanics for deep hard rock excavations are discussed.First,a series of apparatuses and methods have been ...To analyze and predict the mechanical behaviors of deep hard rocks,some key issues concerning rock fracturing mechanics for deep hard rock excavations are discussed.First,a series of apparatuses and methods have been developed to test the mechanical properties and fracturing behaviors of hard rocks under high true triaxial stress paths.Evolution mechanisms of stress-induced disasters in deep hard rock excavations,such as spalling,deep cracking,massive roof collapse,large deformation and rockbursts,have been recognized.The analytical theory for the fracturing process of hard rock masses,including the three-dimensional failure criterion,stress-induced mechanical model,fracturing degree index,energy release index and numerical method,has been established.The cracking-restraint method is developed for mitigating or controlling rock spalling,deep cracking and massive collapse of deep hard rocks.An energy-controlled method is also proposed for the prevention of rockbursts.Finally,two typical cases are used to illustrate the application of the proposed methodology in the Baihetan caverns and Bayu tunnels of China.展开更多
Destress blasting is a rockburst control technique where highly stressed rock is blasted to reduce the local stress and stiffness of the rock,thereby reducing its burst proneness.The technique is commonly practiced in...Destress blasting is a rockburst control technique where highly stressed rock is blasted to reduce the local stress and stiffness of the rock,thereby reducing its burst proneness.The technique is commonly practiced in deep hard rock mines in burst prone developments,as well as in sill or crown pillars which become burst-prone as the orebody is extracted.Large-scale destressing is a variant of destress blasting where panels are created parallel to the orebody strike with a longhole,fanning blast pattern from cross cut drifts situated in the host rock.The aim of panel destressing is to reduce the stress concentration in the ore blocks or pillars to be mined.This paper focuses on the large-scale destress blasting program conducted at Vale's Copper Cliff Mine(CCM)in Ontario,Canada.The merits of panel destressing are examined through field measurements of mining induced stress changes in the pillar.The destressing mechanism is simulated with a rock fragmentation factor(a)and stress reduction/dissipation factor(b).A 3D model is built and validated with measured induced stress changes.It is shown that the best correlation between the numerical model and field measurements is obtained when the combination of a and b indicates that the blast causes high fragmentation(a=0.05)and high stress release(b=0.95)in the destress panel.It is demonstrated that the burst proneness of the ore blocks in the panel stress shadow is reduced in terms of the brittle shear ratio(BSR)and the burst potential index(BPI).展开更多
To better understand the mechanical properties of marble at Jinping II hydropower station, this paper examines the changes of brittle rocks in excavation damaged zones(EDZs) before and after excavation of tunnel with ...To better understand the mechanical properties of marble at Jinping II hydropower station, this paper examines the changes of brittle rocks in excavation damaged zones(EDZs) before and after excavation of tunnel with the tunnel boring machine(TBM). The paper attempts to employ the acoustic emission(AE) to study the AE characteristics and distribution of rockburst before and after TBM-excavated tunnel. It is known that the headrace tunnel #2, excavated by the drill-and-blast(D&B) method, is ahead of the headrace tunnel #3 that is excavated by TBM method. The experimental sub-tunnel #2–1, about 2000 m in depth and 13 m in diameter, between the two tunnels is scheduled. In the experimental sub-tunnel #2–1, a large number of experimental boreholes are arranged, and AE sensors are installed within 10 m apart from the wall of the headrace tunnel #3. By tracking the microseismic signals in rocks, the location, frequency, quantity, scope and intensity of the microseismic signals are basically identifed. It is observed that the AE signals mainly occur within 5 m around the rock wall, basically lasting for one day before tunnel excavation and a week after excavation. Monitoring results indicate that the rockburst signals are closely related to rock stress adjustment. The rock structure has a rapid self-adjustment capacity before and after a certain period of time during tunneling. The variations of rock stresses would last for a long time before reaching a fnal steady state. Based on this, the site-specifc support parameters for the deep tunnels can be accordingly optimized.展开更多
Coalburst is one of the most serious disasters that threaten the safe production of coal mines, and this disaster is particularly serious in China. This paper presents an overview of coalbursts in China since 1980s. F...Coalburst is one of the most serious disasters that threaten the safe production of coal mines, and this disaster is particularly serious in China. This paper presents an overview of coalbursts in China since 1980s. From the "stress and energy" and "regional and local" perspectives, the achievements in the theory, practice and management of coalbursts in China are systematically summarized. A theoretical system of coalbursts has been formed to reveal the deformational behavior of coalbursts and explain the mechanism of coalbursts. The occurrence conditions of coalbursts are put forward and the critical stress is obtained. The stress index method for risk evaluation of coalbursts before mining is proposed, and the deformation localization prediction method of coalbursts is put forward. The relationship between energy release and absorption in the process of coalbursts is found, and the prevention and control methods of coalbursts, including the regional method, the local method and support, are presented. The safety evaluation index of coalburst prevention and control is put forward. The integrated prevention and control method for coal and gas outbursts is proposed. The prevention and control technology and equipment of coalbursts have also been developed. Amongst them, the distribution law of the critical stress in China coalburst mines is discovered. The technology and equipment for monitoring, prevention and control of coalbursts, as well as for integrated prevention and control of combined coalbursts and other disasters, have been developed. The energy-absorbing and coalburst-preventing support technology for roadways is invented, and key engineering parameters of coalburst prevention and control are pointed out. In China, coalburst prevention and control laws and standards have been developed. Technical standards for coalbursts are formulated, statute and regulations for coal mines are established, and regulatory documents are promoted.展开更多
Presently the seismic and rock burst hazard appears still to be important in most of hard coal mines in Poland. Recently, there was a significant increase of seismic activity of the Silesian rock massive, when compare...Presently the seismic and rock burst hazard appears still to be important in most of hard coal mines in Poland. Recently, there was a significant increase of seismic activity of the Silesian rock massive, when compared with the previous years. In the period 1999-2008 the hard coal mines experienced 34 rock bursts. The causes of rockburst occurrence are presented based on the analysis of the rockbursts occurring in the Polish hard coal mines. The scale of the rockburst hazard has been characterized with respect to the mining and geological conditions of the existing exploitation. Of the factors influencing the state of rockburst hazard, the most essential one is considered the depth interval ranging from 600 m to 900 m. The basic factors that promote the rockburst occurrence are as follows： seismogenic strata, edges and remnants, goal, faults, pillars and excessive paneling.展开更多
This study aims to determine if large-scale choked panel destress blasting can provide sufficient beneficial stress reduction in highly-stressed remnant ore pillar that is planned for production. The orebody is divide...This study aims to determine if large-scale choked panel destress blasting can provide sufficient beneficial stress reduction in highly-stressed remnant ore pillar that is planned for production. The orebody is divided into 20 stopes over 2 levels, and 2 panels are choke-blasted in the hanging wall to shield the ore pillar by creating a stress shadow around it. A linear-elastic model of the mining system is constructed with finite difference code FLAC3 D. The effect of destress blasting in the panels is simulated by applying a fragmentation factor(α) to the rock mass stiffness and a stress reduction factor(β) to the current state of stress in the region occupied by the destress panels. As an extreme case, the destress panel is also modeled as a void to obtain the maximum possible beneficial effects of destressing and stress shadow.Four stopes are mined in the stress shadow of the panels in 6 lifts and then backfilled. The effect of destress blasting on the remnant ore pillar is quantified based on stress change and brittle shear ratio(BSR) in the stress shadow zone compared to the base case without destress blasting. To establish realistic rock fragmentation and stress reduction factors, model results are compared to measured stress changes reported for case studies at Fraser and Brunswick mines. A 1.5 MPa immediate stress decrease was observed 20 m away from the panel at Fraser Mine, and a 4 MPa immediate stress decrease was observed 25 m away at Brunswick Mine. Comparable results are obtained from the current model with a rock fragmentation factor α of 0.2 and a stress reduction factor α of 0.8. It is shown that a destress blasting with these parameters reduces the major principal stress in the nearest stopes by 10-25 MPa.This yields an immediate reduction of BSR, which is deemed sufficient to reduce volume of ore at risk in the pillar.展开更多
Numerical analysis of the total energy release of surrounding rocks excavated by drill-and-blast （D＆B） method and tunnel boring machine （TBM） method is presented in the paper. The stability of deep tunnels during...Numerical analysis of the total energy release of surrounding rocks excavated by drill-and-blast （D＆B） method and tunnel boring machine （TBM） method is presented in the paper. The stability of deep tunnels during excavation in terms of energy release is also discussed. The simulation results reveal that energy release during blasting excavation is a dynamic process. An intense dynamic effect is captured at large excavation footage. The magnitude of energy release during full-face excavation with D＆B method is higher than that with TBM method under the same conditions. The energy release rate （ERR） and speed （ERS） also have similar trends. Therefore, the rockbursts in tunnels excavated by D＆B method are frequently encountered and more intensive than those by TBM method. Since the space after tunnel face is occupied by the backup system of TBM, prevention and control of rockbursts are more difficult. Thus, rockbursts in tunnels excavated by TBM method with the same intensity are more harmful than those in tunnels by D＆B method. Reducing tunneling rate of TBM seems to be a good means to decrease ERR and risk of rockburst. The rockbursts observed during excavation of headrace tunnels at Jinping II hydropower station in West China confirm the analytical results obtained in this paper.展开更多
Rockbursts occur as a direct consequence of underground mining or civil excavation.The general scale of their seismic disturbance and consequences depend upon known factors.However,uncertainty remains as to exactly wh...Rockbursts occur as a direct consequence of underground mining or civil excavation.The general scale of their seismic disturbance and consequences depend upon known factors.However,uncertainty remains as to exactly when and where rockbursts will occur,as well as the effectiveness of ground support measures to fully mitigate their consequences.While the uncertainty in when and where is a dilemma shared with earthquake prediction,that associated with ground support capability is both a design and a management concern.Following a brief review of the known mechanisms that produce rockbursts,the paper explores the sources and scales of energy demands that characterize the risk of their damaging consequences upon underground excavations.We note that some of this risk continues to be associated with uncertainty with respect to rockmass properties and in situ stress,particularly in the context of deep mining.A review is presented of all available yielding ground support systems and their necessary design requirements,identifying practical weaknesses and limitations where these are known.The paper concludes with some suggested areas where further study and development could provide the ways and means to reduce the design uncertainty in managing rockbursts.展开更多
Rockbursts are sudden and violent rock failures that can lead to huge production and equipment losses,injury or death of mining workers.Buckling has been regarded as one of the key mechanisms of rockbursts,which are o...Rockbursts are sudden and violent rock failures that can lead to huge production and equipment losses,injury or death of mining workers.Buckling has been regarded as one of the key mechanisms of rockbursts,which are often induced by dynamic loads from mining excavations,such as drilling and blasting in underground mining.The paper attempts to investigate the dynamic buckling mechanism of pillar rockbursts in underground mining,by considering rockbursts as a dynamic stability problem of underground rock structures.The results include:(1)A new explanation of the“sudden and violent”phenomenon of rockbursts,characterized by exponential growth of the amplitudes of transverse displacement responses,even in the presence of rock damping;(2)Identification of the critical role in inducing rockbursts of dynamic loads that bear frequencies approximately double the natural pillar frequency;(3)The greater influence on rockburst occurrence of the amplitude of dynamic component relative to the static component of loads;and(4)Quantification of the relative effects of stress waveform of dynamic loads on pillar rockbursts,which are in decreasing order if other parameters remain constant:rectangular,sinusoidal,and exponential waveforms.Application examples are provided and limitations of the approach are discussed.This research is motivated by the on-going and ubiquitous occurrence of rockbursts in underground excavations all around the world.In contrast to conventional methods that use rock specimens or rock materials to study rockbursts,this investigation emphasizes the structural effects on rockbursts,which has potential applications in hard rock mining engineering.展开更多
文摘In the paper results of passive tomography calculations have been presented to assess rockburst hazard and locate high seismic activity zones in the vicinity of longwall 306 in Zabrze Bielszowice coal mine. The area of study was 1000 m in X direction by 900 m in Y direction. The zones of high values of P-wave propagation velocity have been found to correlate with the distribution of large seismic tremors.
基金financial support from the National Natural Science Foundation of China(Grant Nos.51839003 and 41827806)Liaoning Revitalization Talents Program of China(Grant No.XLYCYSZX1902)。
文摘To analyze and predict the mechanical behaviors of deep hard rocks,some key issues concerning rock fracturing mechanics for deep hard rock excavations are discussed.First,a series of apparatuses and methods have been developed to test the mechanical properties and fracturing behaviors of hard rocks under high true triaxial stress paths.Evolution mechanisms of stress-induced disasters in deep hard rock excavations,such as spalling,deep cracking,massive roof collapse,large deformation and rockbursts,have been recognized.The analytical theory for the fracturing process of hard rock masses,including the three-dimensional failure criterion,stress-induced mechanical model,fracturing degree index,energy release index and numerical method,has been established.The cracking-restraint method is developed for mitigating or controlling rock spalling,deep cracking and massive collapse of deep hard rocks.An energy-controlled method is also proposed for the prevention of rockbursts.Finally,two typical cases are used to illustrate the application of the proposed methodology in the Baihetan caverns and Bayu tunnels of China.
基金This work is financially supported by a joint grant from MITACS Canada and Vale Canada Ltdthe MEDA fellowship program of the McGill faculty of Engineering.
文摘Destress blasting is a rockburst control technique where highly stressed rock is blasted to reduce the local stress and stiffness of the rock,thereby reducing its burst proneness.The technique is commonly practiced in deep hard rock mines in burst prone developments,as well as in sill or crown pillars which become burst-prone as the orebody is extracted.Large-scale destressing is a variant of destress blasting where panels are created parallel to the orebody strike with a longhole,fanning blast pattern from cross cut drifts situated in the host rock.The aim of panel destressing is to reduce the stress concentration in the ore blocks or pillars to be mined.This paper focuses on the large-scale destress blasting program conducted at Vale's Copper Cliff Mine(CCM)in Ontario,Canada.The merits of panel destressing are examined through field measurements of mining induced stress changes in the pillar.The destressing mechanism is simulated with a rock fragmentation factor(a)and stress reduction/dissipation factor(b).A 3D model is built and validated with measured induced stress changes.It is shown that the best correlation between the numerical model and field measurements is obtained when the combination of a and b indicates that the blast causes high fragmentation(a=0.05)and high stress release(b=0.95)in the destress panel.It is demonstrated that the burst proneness of the ore blocks in the panel stress shadow is reduced in terms of the brittle shear ratio(BSR)and the burst potential index(BPI).
文摘To better understand the mechanical properties of marble at Jinping II hydropower station, this paper examines the changes of brittle rocks in excavation damaged zones(EDZs) before and after excavation of tunnel with the tunnel boring machine(TBM). The paper attempts to employ the acoustic emission(AE) to study the AE characteristics and distribution of rockburst before and after TBM-excavated tunnel. It is known that the headrace tunnel #2, excavated by the drill-and-blast(D&B) method, is ahead of the headrace tunnel #3 that is excavated by TBM method. The experimental sub-tunnel #2–1, about 2000 m in depth and 13 m in diameter, between the two tunnels is scheduled. In the experimental sub-tunnel #2–1, a large number of experimental boreholes are arranged, and AE sensors are installed within 10 m apart from the wall of the headrace tunnel #3. By tracking the microseismic signals in rocks, the location, frequency, quantity, scope and intensity of the microseismic signals are basically identifed. It is observed that the AE signals mainly occur within 5 m around the rock wall, basically lasting for one day before tunnel excavation and a week after excavation. Monitoring results indicate that the rockburst signals are closely related to rock stress adjustment. The rock structure has a rapid self-adjustment capacity before and after a certain period of time during tunneling. The variations of rock stresses would last for a long time before reaching a fnal steady state. Based on this, the site-specifc support parameters for the deep tunnels can be accordingly optimized.
基金This work was supported by the National Natural Science Foundation of China-Liaoning Joint Fund Key Project(Grant No.U1908222)the National Natural Science Foundation of China(Grant No.51774015).
文摘Coalburst is one of the most serious disasters that threaten the safe production of coal mines, and this disaster is particularly serious in China. This paper presents an overview of coalbursts in China since 1980s. From the "stress and energy" and "regional and local" perspectives, the achievements in the theory, practice and management of coalbursts in China are systematically summarized. A theoretical system of coalbursts has been formed to reveal the deformational behavior of coalbursts and explain the mechanism of coalbursts. The occurrence conditions of coalbursts are put forward and the critical stress is obtained. The stress index method for risk evaluation of coalbursts before mining is proposed, and the deformation localization prediction method of coalbursts is put forward. The relationship between energy release and absorption in the process of coalbursts is found, and the prevention and control methods of coalbursts, including the regional method, the local method and support, are presented. The safety evaluation index of coalburst prevention and control is put forward. The integrated prevention and control method for coal and gas outbursts is proposed. The prevention and control technology and equipment of coalbursts have also been developed. Amongst them, the distribution law of the critical stress in China coalburst mines is discovered. The technology and equipment for monitoring, prevention and control of coalbursts, as well as for integrated prevention and control of combined coalbursts and other disasters, have been developed. The energy-absorbing and coalburst-preventing support technology for roadways is invented, and key engineering parameters of coalburst prevention and control are pointed out. In China, coalburst prevention and control laws and standards have been developed. Technical standards for coalbursts are formulated, statute and regulations for coal mines are established, and regulatory documents are promoted.
文摘Presently the seismic and rock burst hazard appears still to be important in most of hard coal mines in Poland. Recently, there was a significant increase of seismic activity of the Silesian rock massive, when compared with the previous years. In the period 1999-2008 the hard coal mines experienced 34 rock bursts. The causes of rockburst occurrence are presented based on the analysis of the rockbursts occurring in the Polish hard coal mines. The scale of the rockburst hazard has been characterized with respect to the mining and geological conditions of the existing exploitation. Of the factors influencing the state of rockburst hazard, the most essential one is considered the depth interval ranging from 600 m to 900 m. The basic factors that promote the rockburst occurrence are as follows： seismogenic strata, edges and remnants, goal, faults, pillars and excessive paneling.
基金financially supported by a joint grant from MITACS Canada and Vale Canada Ltd
文摘This study aims to determine if large-scale choked panel destress blasting can provide sufficient beneficial stress reduction in highly-stressed remnant ore pillar that is planned for production. The orebody is divided into 20 stopes over 2 levels, and 2 panels are choke-blasted in the hanging wall to shield the ore pillar by creating a stress shadow around it. A linear-elastic model of the mining system is constructed with finite difference code FLAC3 D. The effect of destress blasting in the panels is simulated by applying a fragmentation factor(α) to the rock mass stiffness and a stress reduction factor(β) to the current state of stress in the region occupied by the destress panels. As an extreme case, the destress panel is also modeled as a void to obtain the maximum possible beneficial effects of destressing and stress shadow.Four stopes are mined in the stress shadow of the panels in 6 lifts and then backfilled. The effect of destress blasting on the remnant ore pillar is quantified based on stress change and brittle shear ratio(BSR) in the stress shadow zone compared to the base case without destress blasting. To establish realistic rock fragmentation and stress reduction factors, model results are compared to measured stress changes reported for case studies at Fraser and Brunswick mines. A 1.5 MPa immediate stress decrease was observed 20 m away from the panel at Fraser Mine, and a 4 MPa immediate stress decrease was observed 25 m away at Brunswick Mine. Comparable results are obtained from the current model with a rock fragmentation factor α of 0.2 and a stress reduction factor α of 0.8. It is shown that a destress blasting with these parameters reduces the major principal stress in the nearest stopes by 10-25 MPa.This yields an immediate reduction of BSR, which is deemed sufficient to reduce volume of ore at risk in the pillar.
基金Supported by the National Key Basic Research and Development Program of China (2010CB732003)the National Natural Science Foundation of China (51009013,50909077)
文摘Numerical analysis of the total energy release of surrounding rocks excavated by drill-and-blast （D＆B） method and tunnel boring machine （TBM） method is presented in the paper. The stability of deep tunnels during excavation in terms of energy release is also discussed. The simulation results reveal that energy release during blasting excavation is a dynamic process. An intense dynamic effect is captured at large excavation footage. The magnitude of energy release during full-face excavation with D＆B method is higher than that with TBM method under the same conditions. The energy release rate （ERR） and speed （ERS） also have similar trends. Therefore, the rockbursts in tunnels excavated by D＆B method are frequently encountered and more intensive than those by TBM method. Since the space after tunnel face is occupied by the backup system of TBM, prevention and control of rockbursts are more difficult. Thus, rockbursts in tunnels excavated by TBM method with the same intensity are more harmful than those in tunnels by D＆B method. Reducing tunneling rate of TBM seems to be a good means to decrease ERR and risk of rockburst. The rockbursts observed during excavation of headrace tunnels at Jinping II hydropower station in West China confirm the analytical results obtained in this paper.
文摘Rockbursts occur as a direct consequence of underground mining or civil excavation.The general scale of their seismic disturbance and consequences depend upon known factors.However,uncertainty remains as to exactly when and where rockbursts will occur,as well as the effectiveness of ground support measures to fully mitigate their consequences.While the uncertainty in when and where is a dilemma shared with earthquake prediction,that associated with ground support capability is both a design and a management concern.Following a brief review of the known mechanisms that produce rockbursts,the paper explores the sources and scales of energy demands that characterize the risk of their damaging consequences upon underground excavations.We note that some of this risk continues to be associated with uncertainty with respect to rockmass properties and in situ stress,particularly in the context of deep mining.A review is presented of all available yielding ground support systems and their necessary design requirements,identifying practical weaknesses and limitations where these are known.The paper concludes with some suggested areas where further study and development could provide the ways and means to reduce the design uncertainty in managing rockbursts.
基金supported,in part,by the Natural Sciences and Engineering Research Council of Canada(NSERC)
文摘Rockbursts are sudden and violent rock failures that can lead to huge production and equipment losses,injury or death of mining workers.Buckling has been regarded as one of the key mechanisms of rockbursts,which are often induced by dynamic loads from mining excavations,such as drilling and blasting in underground mining.The paper attempts to investigate the dynamic buckling mechanism of pillar rockbursts in underground mining,by considering rockbursts as a dynamic stability problem of underground rock structures.The results include:(1)A new explanation of the“sudden and violent”phenomenon of rockbursts,characterized by exponential growth of the amplitudes of transverse displacement responses,even in the presence of rock damping;(2)Identification of the critical role in inducing rockbursts of dynamic loads that bear frequencies approximately double the natural pillar frequency;(3)The greater influence on rockburst occurrence of the amplitude of dynamic component relative to the static component of loads;and(4)Quantification of the relative effects of stress waveform of dynamic loads on pillar rockbursts,which are in decreasing order if other parameters remain constant:rectangular,sinusoidal,and exponential waveforms.Application examples are provided and limitations of the approach are discussed.This research is motivated by the on-going and ubiquitous occurrence of rockbursts in underground excavations all around the world.In contrast to conventional methods that use rock specimens or rock materials to study rockbursts,this investigation emphasizes the structural effects on rockbursts,which has potential applications in hard rock mining engineering.
