This paper reports the chitosan-mediated synthesis of porous hematite nanoparticles with FeCl3 as the precursor via a hydrothermal approach at 160℃.A series of porous chitosan/iron oxide hybrid nanoparticles were obt...This paper reports the chitosan-mediated synthesis of porous hematite nanoparticles with FeCl3 as the precursor via a hydrothermal approach at 160℃.A series of porous chitosan/iron oxide hybrid nanoparticles were obtained via changing the ratio of chitosan to FeCl3,FeCl3 concentration and pH value of the reaction solution,and producing porous iron oxide nanoparticles after calcination.The as-prepared samples were characterized by means of X-ray diffraction,transmission electron microscopy,thermal gravimetric analysis,Fourier transform infrared,and N2 sorption.The particle sizes of these metal oxides were less than 100 nm,and the pore sizes were in the range of 2-16 nm.It was demonstrated that chitosan played a key role in the formation of the porous structures.The resultant α-Fe2O3 nanoparticles were used as the support to immobilize Au or Pd nanoparticles,producing Au/α-Fe2O3 or Pd/α-Fe2O3 nanoparticles.The as-prepared α-Fe2O3 nanocatalyst exhibited high selectivity towards cyclohexanone and cyclohexanol for catalyzing cyclohexane oxidation with O2 at 150℃.展开更多
Surface treatments applied to titanium and its alloys for implant applications are important for the development of bio properties.In this study,first an oxide layer was formed on the surface of the titanium plate by ...Surface treatments applied to titanium and its alloys for implant applications are important for the development of bio properties.In this study,first an oxide layer was formed on the surface of the titanium plate by micro arc oxidation,and then both calcium phosphate and calcium phosphate/chitosan accumulation were performed for different samples by the sol-gel method.FE-SEM/EDS examinations,XRD,FTIR and thermal analysis were performed for these micro arc-oxidized,calcium phosphate-coated and calcium phosphate/chitosan-coated surfaces.The surface roughnesses for these surfaces were measured between 10μm and 100μm,suitable for bone development on the surface.The effect of chitosan addition on the calcium phosphate-coated surface on apatite formation ability and antibacterial properties was investigated.Although the addition of chitosan slows down the formation of apatite,it ensured that the coating had antibacterial properties.The calcium phosphate/chitosan biocomposite obtained can be recommended for dental and orthopedic implants.展开更多
基金supported by the Ministry of Science and Technology of China (2009CB930802)the Chinese Academy of Sciences (KJCX2.YW.H16)
文摘This paper reports the chitosan-mediated synthesis of porous hematite nanoparticles with FeCl3 as the precursor via a hydrothermal approach at 160℃.A series of porous chitosan/iron oxide hybrid nanoparticles were obtained via changing the ratio of chitosan to FeCl3,FeCl3 concentration and pH value of the reaction solution,and producing porous iron oxide nanoparticles after calcination.The as-prepared samples were characterized by means of X-ray diffraction,transmission electron microscopy,thermal gravimetric analysis,Fourier transform infrared,and N2 sorption.The particle sizes of these metal oxides were less than 100 nm,and the pore sizes were in the range of 2-16 nm.It was demonstrated that chitosan played a key role in the formation of the porous structures.The resultant α-Fe2O3 nanoparticles were used as the support to immobilize Au or Pd nanoparticles,producing Au/α-Fe2O3 or Pd/α-Fe2O3 nanoparticles.The as-prepared α-Fe2O3 nanocatalyst exhibited high selectivity towards cyclohexanone and cyclohexanol for catalyzing cyclohexane oxidation with O2 at 150℃.
文摘Surface treatments applied to titanium and its alloys for implant applications are important for the development of bio properties.In this study,first an oxide layer was formed on the surface of the titanium plate by micro arc oxidation,and then both calcium phosphate and calcium phosphate/chitosan accumulation were performed for different samples by the sol-gel method.FE-SEM/EDS examinations,XRD,FTIR and thermal analysis were performed for these micro arc-oxidized,calcium phosphate-coated and calcium phosphate/chitosan-coated surfaces.The surface roughnesses for these surfaces were measured between 10μm and 100μm,suitable for bone development on the surface.The effect of chitosan addition on the calcium phosphate-coated surface on apatite formation ability and antibacterial properties was investigated.Although the addition of chitosan slows down the formation of apatite,it ensured that the coating had antibacterial properties.The calcium phosphate/chitosan biocomposite obtained can be recommended for dental and orthopedic implants.
