Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon...Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon of fluid resonance in narrow gaps between multi-bodies in close proximity under water waves.The numerical results are compared with experimental data available in the literature.The comparison demonstrates that both the viscous fluid model and the potential flow model are able to predict the resonant frequency reasonably well.However the conventional potential flow model(without artificial damping term) significantly over-predicts the wave height in narrow gaps around the resonant frequency.In order to calibrate the appropriate damping coefficient used for the potential model and make it work as well as the viscous fluid model in predicting the resonant wave height in narrow gaps but with little computational efforts,the dependence of damping coefficient μ on the body geometric dimensions is examined considering the parameters of gap width Bg,body draft D,body breadth ratio Br and body number n(n = 2,3),where Br = BB/BA for the case of two bodies(Body A and Body B) with different breadths of BA and BB,respectively.It was confirmed that the damping coefficient used for the potential flow model is not sensitive to the geometric dimensions and spatial arrangement.It was found that μ∈ [0.4,0.5] may guarantee the variation of Hg/H0 with kh to be generally in good agreement with the experimental data and the results of viscous fluid model,where Hg is the excited wave height in narrow gaps under various dimensionless incident wave frequencies kh,H0 is the incident wave height,k = 2π/L is the wave number and h is the water depth.展开更多
In this paper,the microstructure of narrow gap laser welded joint of 45 mm Ti6321 titanium alloy was characterized.The microstructure characteristics of Laser self-fusion and laser-multi-pass-narrow-gapfilling layer w...In this paper,the microstructure of narrow gap laser welded joint of 45 mm Ti6321 titanium alloy was characterized.The microstructure characteristics of Laser self-fusion and laser-multi-pass-narrow-gapfilling layer were observed by metallographic microscope,and the phase morphology was analyzed by transmission electron microscope.The results show that the joint was obtained using the laser-multipass-narrow-gap welding,and no volumetric defect is observed.The weld grain of self fusion welded bead tends to be equiaxed with lots of needleα’,and the width of weld metal needleα’was 0.4μm.The heat affected zone is columnar crystal with lamellarα,and The width of heat affected zonelamellarαwas 2–4μm with a large number of dislocation tangles.The weld grains of laser-multi-pass-narrow-gap filler bead are coarse columnar grains with staggered acicularα’,and the width of acicularα’in weld metal is less than 1μm with number of dislocations.The heat affected zone is thick lamellar microstructure with a width of 2–4μm with a large number of dislocation entanglement and packing.The microstructure evolution law is related with heating temperature and cooling rate.展开更多
基金supports from the Natural National Science Foundation of China (Grant Nos.50909016,50921001 and 10802014)support of ARC Discovery Project Program (Grant No. DP0557060)supported by the Open Fund from the State Key Laboratory of Structural Analysis for Industrial Equipment (Grant No. GZ0909)
文摘Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon of fluid resonance in narrow gaps between multi-bodies in close proximity under water waves.The numerical results are compared with experimental data available in the literature.The comparison demonstrates that both the viscous fluid model and the potential flow model are able to predict the resonant frequency reasonably well.However the conventional potential flow model(without artificial damping term) significantly over-predicts the wave height in narrow gaps around the resonant frequency.In order to calibrate the appropriate damping coefficient used for the potential model and make it work as well as the viscous fluid model in predicting the resonant wave height in narrow gaps but with little computational efforts,the dependence of damping coefficient μ on the body geometric dimensions is examined considering the parameters of gap width Bg,body draft D,body breadth ratio Br and body number n(n = 2,3),where Br = BB/BA for the case of two bodies(Body A and Body B) with different breadths of BA and BB,respectively.It was confirmed that the damping coefficient used for the potential flow model is not sensitive to the geometric dimensions and spatial arrangement.It was found that μ∈ [0.4,0.5] may guarantee the variation of Hg/H0 with kh to be generally in good agreement with the experimental data and the results of viscous fluid model,where Hg is the excited wave height in narrow gaps under various dimensionless incident wave frequencies kh,H0 is the incident wave height,k = 2π/L is the wave number and h is the water depth.
基金supported by the Luoyang Ship Material Institute's Scientific and Technological Innovation Project(LW190801)Zhengzhou Luoyang and Xinxiang Independent Innovation Demonstration Area(Porject No.201200211400).
文摘In this paper,the microstructure of narrow gap laser welded joint of 45 mm Ti6321 titanium alloy was characterized.The microstructure characteristics of Laser self-fusion and laser-multi-pass-narrow-gapfilling layer were observed by metallographic microscope,and the phase morphology was analyzed by transmission electron microscope.The results show that the joint was obtained using the laser-multipass-narrow-gap welding,and no volumetric defect is observed.The weld grain of self fusion welded bead tends to be equiaxed with lots of needleα’,and the width of weld metal needleα’was 0.4μm.The heat affected zone is columnar crystal with lamellarα,and The width of heat affected zonelamellarαwas 2–4μm with a large number of dislocation tangles.The weld grains of laser-multi-pass-narrow-gap filler bead are coarse columnar grains with staggered acicularα’,and the width of acicularα’in weld metal is less than 1μm with number of dislocations.The heat affected zone is thick lamellar microstructure with a width of 2–4μm with a large number of dislocation entanglement and packing.The microstructure evolution law is related with heating temperature and cooling rate.
