The high-precision integration of three-dimensional(3D)microoptical components into microfluidics in a customizable manner is crucial for optical sensing,fluorescence analysis,and cell detection in optofluidic applica...The high-precision integration of three-dimensional(3D)microoptical components into microfluidics in a customizable manner is crucial for optical sensing,fluorescence analysis,and cell detection in optofluidic applications;however,it remains challenging for current microfabrication technologies.This paper reports the in-channel integration of flexible two-dimensional(2D)and 3D polymer microoptical devices into glass microfluidics by developing a novel technique:flat scaffold-supported hybrid femtosecond laser microfabrication(FSS-HFLM).The scaffold with an optimal thickness of 1–5 μm is fabricated on the lower internal surface of a microfluidic channel to improve the integration of high-precision microoptical devices on the scaffold by eliminating any undulated internal channel surface caused by wet etching.As a proof of demonstration,two types of typical microoptical devices,namely,2D Fresnel zone plates(FZPs)and 3D refractive microlens arrays(MLAs),are integrated.These devices exhibit multicolor focal spots,elongated(>three times)focal length and imaging of the characters‘RIKEN’in a liquid channel.The resulting optofluidic chips are further used for coupling-free white-light cell counting with a success rate as high as 93%.An optofluidic system with two MLAs and a W-filter is also designed and fabricated for more advanced cell filtering/counting applications.展开更多
Additive manufacturing(AM)is gaining traction in the manufacturing industry for the fabrication of components with complex geometries using a variety of materials.Selective laser melting(SLM)is a common AM technique t...Additive manufacturing(AM)is gaining traction in the manufacturing industry for the fabrication of components with complex geometries using a variety of materials.Selective laser melting(SLM)is a common AM technique that is based on powder-bed fusion(PBF)to process metals;however,it is currently focused only on the fabrication of macroscale and mesoscale components.This paper reviews the state of the art of the SLM of metallic materials at the microscale level.In comparison with the direct writing techniques that are commonly used for micro AM,micro SLM is attractive due to a number of factors,including a faster cycle time,process simplicity,and material versatility.A comprehensive evaluation of various research works and commercial systems for the fabrication of microscale parts using SLM and selective laser sintering(SLS)is conducted.In addition to identifying existing issues with SLM at the microscale,which include powder recoating,laser optics,and powder particle size,this paper details potential future directions.A detailed review of existing recoating methods in powder-bed techniques is conducted,along with a description of emerging efforts to implement dry powder dispensing methods in the AM domain.A number of secondary finishing techniques for AM components are reviewed,with a focus on implementation for microscale features and integration with micro SLM systems.展开更多
The microchip capillary electrophoresis devices were fabricated by using poly(methyl methacrylate)(PMMA) plastic material via an injection-molding process. The molded devices were enclosed by utilizing a mixed organic...The microchip capillary electrophoresis devices were fabricated by using poly(methyl methacrylate)(PMMA) plastic material via an injection-molding process. The molded devices were enclosed by utilizing a mixed organic solvent to another PMMA film. The channel structure was very well defined and the molded channel surfaces were very smooth. The transmissivity was in the range from 91% to 93%(at the wavelength of 400—1 000 nm). In comparison to glass microchannels, the electroosmotic flow(EOF) in native PMMA channels was low. DNA marker separation was demonstrated in these PMMA devices with a high-resolution separation of double-stranded DNA fragments, chip-to-chip and the run-to-run reproducibility was good, and the relative standard deviation(%) values were below 2.2% for run-to-run data and 2.3% for the chip-to-chip comparisons. The PCR amplification products and proteins were analyzed on the PMMA chips. Such devices lead to the production of low-cost, disposable chips suitable for a variety of separation applications, including DNA sizing, DNA sequencing, protein and medical analysis. The detection limits of Rhodamine 6G dye for the unmodified PMMA chip and the modified PMMA chips were 1.0×10 -10 and 6.67×10 -13 mol/L, respectively.展开更多
Cell-substrate interactions play a crucial role in the design of better biomaterials and integration ofimplants with the tissues. Adhesion is the binding process of the cells to the substrate through interactionsbetwe...Cell-substrate interactions play a crucial role in the design of better biomaterials and integration ofimplants with the tissues. Adhesion is the binding process of the cells to the substrate through interactionsbetween the surface molecules of the cell membrane and the substrate. There are severalfactors that affect cell adhesion including substrate surface chemistry, topography, and stiffness. Thesefactors physically and chemically guide and influence the adhesion strength, spreading, shape and fate ofthe cell. Recently, technological advances enabled us to precisely engineer the geometry and chemistry ofsubstrate surfaces enabling the control of the interaction cells with the substrate. Some of the mostcommonly used surface engineering methods for eliciting the desired cellular responses on biomaterialsare photolithography, electron beam lithography, microcontact printing, and microfluidics. Thesemethods allow production of nano- and micron level substrate features that can control cell adhesion,migration, differentiation, shape of the cells and the nuclei as well as measurement of the forces involvedin such activities. This review aims to summarize the current techniques and associate these techniqueswith cellular responses in order to emphasize the effect of chemistry, dimensions, density and design ofsurface patterns on cell-substrate interactions. We conclude with future projections in the field of cellsubstrateinteractions in the hope of providing an outlook for the future studies.展开更多
基金This work was supported by JSPS KAKENHI Grant Number 25286038.
文摘The high-precision integration of three-dimensional(3D)microoptical components into microfluidics in a customizable manner is crucial for optical sensing,fluorescence analysis,and cell detection in optofluidic applications;however,it remains challenging for current microfabrication technologies.This paper reports the in-channel integration of flexible two-dimensional(2D)and 3D polymer microoptical devices into glass microfluidics by developing a novel technique:flat scaffold-supported hybrid femtosecond laser microfabrication(FSS-HFLM).The scaffold with an optimal thickness of 1–5 μm is fabricated on the lower internal surface of a microfluidic channel to improve the integration of high-precision microoptical devices on the scaffold by eliminating any undulated internal channel surface caused by wet etching.As a proof of demonstration,two types of typical microoptical devices,namely,2D Fresnel zone plates(FZPs)and 3D refractive microlens arrays(MLAs),are integrated.These devices exhibit multicolor focal spots,elongated(>three times)focal length and imaging of the characters‘RIKEN’in a liquid channel.The resulting optofluidic chips are further used for coupling-free white-light cell counting with a success rate as high as 93%.An optofluidic system with two MLAs and a W-filter is also designed and fabricated for more advanced cell filtering/counting applications.
基金financial support from the Science and Engineering Research Council,Agency for Science,Technology and Research(A*STAR),Singapore(142 68 00088)
文摘Additive manufacturing(AM)is gaining traction in the manufacturing industry for the fabrication of components with complex geometries using a variety of materials.Selective laser melting(SLM)is a common AM technique that is based on powder-bed fusion(PBF)to process metals;however,it is currently focused only on the fabrication of macroscale and mesoscale components.This paper reviews the state of the art of the SLM of metallic materials at the microscale level.In comparison with the direct writing techniques that are commonly used for micro AM,micro SLM is attractive due to a number of factors,including a faster cycle time,process simplicity,and material versatility.A comprehensive evaluation of various research works and commercial systems for the fabrication of microscale parts using SLM and selective laser sintering(SLS)is conducted.In addition to identifying existing issues with SLM at the microscale,which include powder recoating,laser optics,and powder particle size,this paper details potential future directions.A detailed review of existing recoating methods in powder-bed techniques is conducted,along with a description of emerging efforts to implement dry powder dispensing methods in the AM domain.A number of secondary finishing techniques for AM components are reviewed,with a focus on implementation for microscale features and integration with micro SLM systems.
文摘The microchip capillary electrophoresis devices were fabricated by using poly(methyl methacrylate)(PMMA) plastic material via an injection-molding process. The molded devices were enclosed by utilizing a mixed organic solvent to another PMMA film. The channel structure was very well defined and the molded channel surfaces were very smooth. The transmissivity was in the range from 91% to 93%(at the wavelength of 400—1 000 nm). In comparison to glass microchannels, the electroosmotic flow(EOF) in native PMMA channels was low. DNA marker separation was demonstrated in these PMMA devices with a high-resolution separation of double-stranded DNA fragments, chip-to-chip and the run-to-run reproducibility was good, and the relative standard deviation(%) values were below 2.2% for run-to-run data and 2.3% for the chip-to-chip comparisons. The PCR amplification products and proteins were analyzed on the PMMA chips. Such devices lead to the production of low-cost, disposable chips suitable for a variety of separation applications, including DNA sizing, DNA sequencing, protein and medical analysis. The detection limits of Rhodamine 6G dye for the unmodified PMMA chip and the modified PMMA chips were 1.0×10 -10 and 6.67×10 -13 mol/L, respectively.
文摘Cell-substrate interactions play a crucial role in the design of better biomaterials and integration ofimplants with the tissues. Adhesion is the binding process of the cells to the substrate through interactionsbetween the surface molecules of the cell membrane and the substrate. There are severalfactors that affect cell adhesion including substrate surface chemistry, topography, and stiffness. Thesefactors physically and chemically guide and influence the adhesion strength, spreading, shape and fate ofthe cell. Recently, technological advances enabled us to precisely engineer the geometry and chemistry ofsubstrate surfaces enabling the control of the interaction cells with the substrate. Some of the mostcommonly used surface engineering methods for eliciting the desired cellular responses on biomaterialsare photolithography, electron beam lithography, microcontact printing, and microfluidics. Thesemethods allow production of nano- and micron level substrate features that can control cell adhesion,migration, differentiation, shape of the cells and the nuclei as well as measurement of the forces involvedin such activities. This review aims to summarize the current techniques and associate these techniqueswith cellular responses in order to emphasize the effect of chemistry, dimensions, density and design ofsurface patterns on cell-substrate interactions. We conclude with future projections in the field of cellsubstrateinteractions in the hope of providing an outlook for the future studies.
