This study successfully deals with the inhomogeneous dimension problem of load separation assumption, which is the theoretical basis of the normalization method. According to the dimensionless load separation principl...This study successfully deals with the inhomogeneous dimension problem of load separation assumption, which is the theoretical basis of the normalization method. According to the dimensionless load separation principle, the normalization method has been improved by intro- ducing a forcible blunting correction. With the improved normalization method, the J-resistance curves of five different metallic materials of CT and SEB specimens are estimated. The forcible blunting correction of initial crack size plays an important role in the J-resistance curve estima- tion, which is closely related to the strain hardening level of material. The higher level of strain hardening leads to a greater difference in JQ determined by different slopes of the blunting line. If the blunting line coefficient recommended by ASTM E1820-11 is used in the improved nor- realization method, it will lead to greater fracture resistance than that processed by the blunting line coefficient recommended by ISO 12135-2002. Therefore, the influence of the blunting line on the determination of JQ must be taken into full account in the fracture toughness assessment of metallic materials.展开更多
This work deals with the numerical localization of small electromagnetic inhomogeneities. The underlying inverse problem considers, in a three-dimensional bounded domain, the time-harmonic Maxwell equations formulated...This work deals with the numerical localization of small electromagnetic inhomogeneities. The underlying inverse problem considers, in a three-dimensional bounded domain, the time-harmonic Maxwell equations formulated in electric field. Typically, the domain contains a finite number of unknown inhomogeneities of small volume and the inverse problem attempts to localize these inhomogeneities from a finite number of boundary measurements. Our localization approach is based on a recent framework that uses an asymptotic expansion for the perturbations in the tangential boundary trace of the curl of the electric field. We present three numerical localization procedures resulting from the combination of this asymptotic expansion with each of the following inversion algorithms： the Current Projection method, the MUltiple Signal Classification （MUSIC） algorithm, and an Inverse Fourier method. We perform a numerical study of the asymptotic expansion and compare the numerical results obtained from the three localization procedures in different settings.展开更多
The microscopic analyses of polycrystalline material at high temperature were carried out. The crystal plasticity model proposed by Asaro and Needleman was applied to a polycrystal model in the finite element simulati...The microscopic analyses of polycrystalline material at high temperature were carried out. The crystal plasticity model proposed by Asaro and Needleman was applied to a polycrystal model in the finite element simulation and the crystal slip system was randomly provided for each crystal. The grain boundary sliding, which was characteristic at high temperature, was also taken into account. It was shown that the inhomo-geneous deformation develops over the polycrystal and that the strain concentration appears around the triple point of crystal grain boundary.展开更多
基金supported by the National Natural Science Foundation of China(Nos.11472228 and 11202174)the Sichuan Provincial Youth Science and Technology Innovation Team(No.2013TD0004)
文摘This study successfully deals with the inhomogeneous dimension problem of load separation assumption, which is the theoretical basis of the normalization method. According to the dimensionless load separation principle, the normalization method has been improved by intro- ducing a forcible blunting correction. With the improved normalization method, the J-resistance curves of five different metallic materials of CT and SEB specimens are estimated. The forcible blunting correction of initial crack size plays an important role in the J-resistance curve estima- tion, which is closely related to the strain hardening level of material. The higher level of strain hardening leads to a greater difference in JQ determined by different slopes of the blunting line. If the blunting line coefficient recommended by ASTM E1820-11 is used in the improved nor- realization method, it will lead to greater fracture resistance than that processed by the blunting line coefficient recommended by ISO 12135-2002. Therefore, the influence of the blunting line on the determination of JQ must be taken into full account in the fracture toughness assessment of metallic materials.
基金supported by ACI NIM (171) from the French Ministry of Education and Scientific Research
文摘This work deals with the numerical localization of small electromagnetic inhomogeneities. The underlying inverse problem considers, in a three-dimensional bounded domain, the time-harmonic Maxwell equations formulated in electric field. Typically, the domain contains a finite number of unknown inhomogeneities of small volume and the inverse problem attempts to localize these inhomogeneities from a finite number of boundary measurements. Our localization approach is based on a recent framework that uses an asymptotic expansion for the perturbations in the tangential boundary trace of the curl of the electric field. We present three numerical localization procedures resulting from the combination of this asymptotic expansion with each of the following inversion algorithms： the Current Projection method, the MUltiple Signal Classification （MUSIC） algorithm, and an Inverse Fourier method. We perform a numerical study of the asymptotic expansion and compare the numerical results obtained from the three localization procedures in different settings.
基金supported by the Ministry of Education,Japan,as 21st Century COE program on Sustainable Energy System(E-3)as grant-in-aid for scientific research(No.15360053)
文摘The microscopic analyses of polycrystalline material at high temperature were carried out. The crystal plasticity model proposed by Asaro and Needleman was applied to a polycrystal model in the finite element simulation and the crystal slip system was randomly provided for each crystal. The grain boundary sliding, which was characteristic at high temperature, was also taken into account. It was shown that the inhomo-geneous deformation develops over the polycrystal and that the strain concentration appears around the triple point of crystal grain boundary.
