The current research of titanium alloy on friction welding process in the field of aero-engines mainly focuses on the linear friction welding.Compared to the linear friction welding,inertial friction welding of titani...The current research of titanium alloy on friction welding process in the field of aero-engines mainly focuses on the linear friction welding.Compared to the linear friction welding,inertial friction welding of titanium alloy still has important application position in the welding of aero-engine rotating assembly.However,up to now,few reports on inertial friction welding of titanium alloy are found.In this paper,the near-alpha TA19 titanium alloy welded joint was successfully obtained by inertial friction welding(IFW)process.The microstructures and mechanical properties were investigated systematically.Results showed that the refined grains within 15‒20μm and weak texture were found in the weld zone due to dynamic recrystallization caused by high temperature and plastic deformation.The weld zone consisted of acicularα′martensite phase,αp phase and metastableβphase.Most lath-shapedαs andβphase in base metal were transformed into acicular martensiteα′phase and metastableβphase in thermo-mechanically affected zone and heat affected zone.As a result,the microhardness of welded joint gradually decreased from the weld zone to the base metal.Tensile specimens in room temperature and high temperature of 480℃ were all fractured in base metal illustrating that the inertia friction welded TA19 titanium alloy joint owned higher tensile strength compared to the base metal.展开更多
High-spin yrast structures of even-even superheavy nuclei 254-25SRf are investigated by means of total- Routhian-surface approach in three-dimensional （f12, 7, f14） space. The behavior in the moments of inertia of 2...High-spin yrast structures of even-even superheavy nuclei 254-25SRf are investigated by means of total- Routhian-surface approach in three-dimensional （f12, 7, f14） space. The behavior in the moments of inertia of 256Rf is well reproduced by our calculations, which is attributed to the J15/2 neutron rotation-alignment. The competition between the rotationally aligned ila/2 proton and j15/2 neutron may occur to a large extent in 256Rf. High-spin predictions are also made for its neighboring isotopes 254＇2ssRf, showing that the alignment of the j15/2 neutron pair is more favored than that of the i13/2 proton pair.展开更多
基金Supported by Natural Science Foundation to Basic Research in Key Areas of Heilongjiang Province of China(Grant No.TD2020E002).
文摘The current research of titanium alloy on friction welding process in the field of aero-engines mainly focuses on the linear friction welding.Compared to the linear friction welding,inertial friction welding of titanium alloy still has important application position in the welding of aero-engine rotating assembly.However,up to now,few reports on inertial friction welding of titanium alloy are found.In this paper,the near-alpha TA19 titanium alloy welded joint was successfully obtained by inertial friction welding(IFW)process.The microstructures and mechanical properties were investigated systematically.Results showed that the refined grains within 15‒20μm and weak texture were found in the weld zone due to dynamic recrystallization caused by high temperature and plastic deformation.The weld zone consisted of acicularα′martensite phase,αp phase and metastableβphase.Most lath-shapedαs andβphase in base metal were transformed into acicular martensiteα′phase and metastableβphase in thermo-mechanically affected zone and heat affected zone.As a result,the microhardness of welded joint gradually decreased from the weld zone to the base metal.Tensile specimens in room temperature and high temperature of 480℃ were all fractured in base metal illustrating that the inertia friction welded TA19 titanium alloy joint owned higher tensile strength compared to the base metal.
基金Supported by National Natural Science Foundation of China(10805040,11175217)Foundation and Advanced Technology Research Program of Henan Province(132300410125)S&T Research Key Program of Henan Province Education Department(13A140667)
文摘High-spin yrast structures of even-even superheavy nuclei 254-25SRf are investigated by means of total- Routhian-surface approach in three-dimensional （f12, 7, f14） space. The behavior in the moments of inertia of 256Rf is well reproduced by our calculations, which is attributed to the J15/2 neutron rotation-alignment. The competition between the rotationally aligned ila/2 proton and j15/2 neutron may occur to a large extent in 256Rf. High-spin predictions are also made for its neighboring isotopes 254＇2ssRf, showing that the alignment of the j15/2 neutron pair is more favored than that of the i13/2 proton pair.
