Pour point depressants （PPD） are used to improve the theology of waxy crude. The affect of various factors on the theological properties, and the thermal characteristics of waxy crude treated by PPD have been invest...Pour point depressants （PPD） are used to improve the theology of waxy crude. The affect of various factors on the theological properties, and the thermal characteristics of waxy crude treated by PPD have been investigated. The conclusions are as follows： PPD can reduce the pour point and abnormal point of waxy crude, broaden the temperature range of Newtonian fluid of waxy crude, and lower greatly the viscosity of non-Newtonian fluid of waxy crude. The influence of reheating and high-rate shear on the effect of PPD mainly depends on their temperature. When the reheating temperature is more than the abnormal point of crude by 10℃, the reheating process has little effect on the modification effect of PPD. However, when the reheating temperature is below the abnormal point of crude, the reheating process will reduce the modification effect of PPD. When temperature is above the abnormal point of crude, the high-rate shear has little effect on the modification effect of PPD. At a temperature range where a lot of wax is precipitating, high-rate shear will greatly reduce the modification effect of PPD.展开更多
Background llexonin A (IA), purified from the Chinese herbal medicine Maodongqing (Ilex pubescens Hook, et Am) has been commonly used in south China to treat thrombotic disorders. In this study, we aimed to study the ...Background llexonin A (IA), purified from the Chinese herbal medicine Maodongqing (Ilex pubescens Hook, et Am) has been commonly used in south China to treat thrombotic disorders. In this study, we aimed to study the inhibiting effects and mechanism of IA on von Willebrand factor (vWF)-dependent high shear-induced platelet aggregation.Methods vWF-dependent high shear (10 800 s-1) induced aggregation of platelets obtained from normal donors in the presence or absence of IA was measured by a modified cone-plate viscometer and shear-induced vWF binding was measured by quantitative flowcytometry with monoclonal antibody known to bind exclusively to the C-terminal domain of vWF (LJ-C3) directly labeled with fluorescein isothiocyanate (FITC). P-selectin surface expression was also measured by a similar method with FITC conjugated anti-P-selectin monoclonal antibody (WGA1).Results Shear-induced platelet aggregation was inhibited by IA in a dose-dependent manner. The extent of aggregation decreased from (78. 6 ±4. 6)% in the absence of IA to (36. 5 ±2.1)% in the presence of IA (3. 3 mmol/L) (P<0. 0001, n =9) with a high shear rate of 10800 s-1. vWF binding and P-selectin expression were also inhibited by IA in a dose dependent manner. The number of binding FITC-LJ-C3 molecules increased after exposure of platelet-rich plasma to a high shear rate of 10800 s-1 for 6 minutes, but this shear-induced increased binding platelet surface vWF molecules and P-selectin expression can be decreased in the presence of IA.Conclusion vWF binding and vWF mediated platelet activation, aggregation occurring under high shear rate were inhibited by IA. IA may be a unique antithrombotic drug inhibiting the vWF-GP Ibα interaction, and may thus facilitate drug design targeting arterial thrombosis.展开更多
To investigate the effects of rotation speed and shearing time on morphology of semisolid AZ91D alloy,experimental work was undertaken using a twin-screw slurry maker.The results show that increasing the rotation spee...To investigate the effects of rotation speed and shearing time on morphology of semisolid AZ91D alloy,experimental work was undertaken using a twin-screw slurry maker.The results show that increasing the rotation speed and reasonable time can give rise to substantial grain refinement during continuous shearing stage,which can be attributed to the increasing of effective nucleation rate caused by the extremely uniform temperature due to high shear rate and high degree of turbulence.Comparing with low rotation speed at the same thermal condition,the analysis indicates that the microstructures obtained at high rotation speed are homogenous spherical and fine grains instead of dendritic or rosette and exhibits uniform distribution in the eutectic matrix.展开更多
文摘Pour point depressants （PPD） are used to improve the theology of waxy crude. The affect of various factors on the theological properties, and the thermal characteristics of waxy crude treated by PPD have been investigated. The conclusions are as follows： PPD can reduce the pour point and abnormal point of waxy crude, broaden the temperature range of Newtonian fluid of waxy crude, and lower greatly the viscosity of non-Newtonian fluid of waxy crude. The influence of reheating and high-rate shear on the effect of PPD mainly depends on their temperature. When the reheating temperature is more than the abnormal point of crude by 10℃, the reheating process has little effect on the modification effect of PPD. However, when the reheating temperature is below the abnormal point of crude, the reheating process will reduce the modification effect of PPD. When temperature is above the abnormal point of crude, the high-rate shear has little effect on the modification effect of PPD. At a temperature range where a lot of wax is precipitating, high-rate shear will greatly reduce the modification effect of PPD.
基金This work was supported by grants from the Japanese Society for the Promotion of Science (No. JSPS-RFTF97100201) by the Hong Kong Baptist University Faculty Research Grant (No. HKBU/FRG/01-02/11-27).
文摘Background llexonin A (IA), purified from the Chinese herbal medicine Maodongqing (Ilex pubescens Hook, et Am) has been commonly used in south China to treat thrombotic disorders. In this study, we aimed to study the inhibiting effects and mechanism of IA on von Willebrand factor (vWF)-dependent high shear-induced platelet aggregation.Methods vWF-dependent high shear (10 800 s-1) induced aggregation of platelets obtained from normal donors in the presence or absence of IA was measured by a modified cone-plate viscometer and shear-induced vWF binding was measured by quantitative flowcytometry with monoclonal antibody known to bind exclusively to the C-terminal domain of vWF (LJ-C3) directly labeled with fluorescein isothiocyanate (FITC). P-selectin surface expression was also measured by a similar method with FITC conjugated anti-P-selectin monoclonal antibody (WGA1).Results Shear-induced platelet aggregation was inhibited by IA in a dose-dependent manner. The extent of aggregation decreased from (78. 6 ±4. 6)% in the absence of IA to (36. 5 ±2.1)% in the presence of IA (3. 3 mmol/L) (P<0. 0001, n =9) with a high shear rate of 10800 s-1. vWF binding and P-selectin expression were also inhibited by IA in a dose dependent manner. The number of binding FITC-LJ-C3 molecules increased after exposure of platelet-rich plasma to a high shear rate of 10800 s-1 for 6 minutes, but this shear-induced increased binding platelet surface vWF molecules and P-selectin expression can be decreased in the presence of IA.Conclusion vWF binding and vWF mediated platelet activation, aggregation occurring under high shear rate were inhibited by IA. IA may be a unique antithrombotic drug inhibiting the vWF-GP Ibα interaction, and may thus facilitate drug design targeting arterial thrombosis.
基金Project (2009DFB50210) supported by the International Cooperation in Technical Research and Development Program of ChinaProject (2009AA03Z534) supported by the National High-Tech Research and Development Program of ChinaProject (2006CB605203) supported by the National Basic Research Program of China
文摘To investigate the effects of rotation speed and shearing time on morphology of semisolid AZ91D alloy,experimental work was undertaken using a twin-screw slurry maker.The results show that increasing the rotation speed and reasonable time can give rise to substantial grain refinement during continuous shearing stage,which can be attributed to the increasing of effective nucleation rate caused by the extremely uniform temperature due to high shear rate and high degree of turbulence.Comparing with low rotation speed at the same thermal condition,the analysis indicates that the microstructures obtained at high rotation speed are homogenous spherical and fine grains instead of dendritic or rosette and exhibits uniform distribution in the eutectic matrix.
