The present work is a visualization study of a typical kerosene （RP-3） flowing through vertical and horizontal quartz-glass tubes under both sub- and supercritical conditions by a high speed camera. The experiments ...The present work is a visualization study of a typical kerosene （RP-3） flowing through vertical and horizontal quartz-glass tubes under both sub- and supercritical conditions by a high speed camera. The experiments are accomplished at temperatures of 300-730 K under pressures from 0.107-5 MPa. Six distinctive two-phase flow patterns are observed in upward flow and the critical point of RP-3 is identified as critical pressure pc=2.33 MPa and critical temperature Tc=645.04 K and it is found that when the fluid pressure exceeds 2.33 MPa the flow can be considered as a single phase flow. The critical opalescence phenomenon of RP-3 is observed when the temperature is between 643.16 K and 648.61 K and the pressure is between 2.308 MPa and 2.366 MPa. The region filled by the critical opalescence in the upward flow is clearly larger than that in the downward flow due to the interaction between the buoyancy force and fluid inertia. Morecover, obvious layered flow phenomenon is observed in horizontal flow under supercritical pressures due to the differences of gravity and density.展开更多
In this work, a simulated aircraft fuel tank inerting system has been successfully estab- lished based on a model tank. Experiments were conducted to investigate the influences of different operating parameters on the...In this work, a simulated aircraft fuel tank inerting system has been successfully estab- lished based on a model tank. Experiments were conducted to investigate the influences of different operating parameters on the inerting effectiveness of the system, including flow rate of the inert gas （nitrogen-enriched air）, inert gas concentration, fuel load of the tank and different inerting approaches. The experimental results show that under the same operating conditions, the time span of a complete inerting process decreased as the flow rate of inert gas was increased; the time span using the inert gas with 5% oxygen concentration was much longer than that using pure nitrogen; when the fuel tank was inerted using the ullage washing approach, the time span increased as the fuel load was decreased; the ullage washing approach showed the best inerting performance when the time span of a complete inerting process was the evaluation criterion, but when the decrease of dissolved oxygen concentration in the fuel was also considered to characterize the inerting effective- ness, the approach of ullage washing and fuel scrubbing at the same time was the most effective.展开更多
Fuel cells and flow batteries are promising technologies to address climate change and air pollution problems. An understanding of the complex multiscale and multiphysics transport phenomena occurring in these electro...Fuel cells and flow batteries are promising technologies to address climate change and air pollution problems. An understanding of the complex multiscale and multiphysics transport phenomena occurring in these electrochemical systems requires powerful numerical tools. Over the past decades, the lattice Boltzmann (LB) method has attracted broad interest in the computational fluid dynamics and the numerical heat transfer communities, primarily due to its kinetic nature making it appropriate for modeling complex multiphase transport phenomena. More importantly, the LB method fits well with parallel computing due to its locality feature, which is required for large-scale engineering applications. In this article, we review the LB method for gas-liquid two-phase flows, coupled fluid flow and mass transport in porous media, and particulate flows. Examples of applications are provided in fuel cells and flow batteries. Further developments of the LB method are also outlined.展开更多
基金National Natural Science Foundation of China(50676005)
文摘The present work is a visualization study of a typical kerosene （RP-3） flowing through vertical and horizontal quartz-glass tubes under both sub- and supercritical conditions by a high speed camera. The experiments are accomplished at temperatures of 300-730 K under pressures from 0.107-5 MPa. Six distinctive two-phase flow patterns are observed in upward flow and the critical point of RP-3 is identified as critical pressure pc=2.33 MPa and critical temperature Tc=645.04 K and it is found that when the fluid pressure exceeds 2.33 MPa the flow can be considered as a single phase flow. The critical opalescence phenomenon of RP-3 is observed when the temperature is between 643.16 K and 648.61 K and the pressure is between 2.308 MPa and 2.366 MPa. The region filled by the critical opalescence in the upward flow is clearly larger than that in the downward flow due to the interaction between the buoyancy force and fluid inertia. Morecover, obvious layered flow phenomenon is observed in horizontal flow under supercritical pressures due to the differences of gravity and density.
文摘In this work, a simulated aircraft fuel tank inerting system has been successfully estab- lished based on a model tank. Experiments were conducted to investigate the influences of different operating parameters on the inerting effectiveness of the system, including flow rate of the inert gas （nitrogen-enriched air）, inert gas concentration, fuel load of the tank and different inerting approaches. The experimental results show that under the same operating conditions, the time span of a complete inerting process decreased as the flow rate of inert gas was increased; the time span using the inert gas with 5% oxygen concentration was much longer than that using pure nitrogen; when the fuel tank was inerted using the ullage washing approach, the time span increased as the fuel load was decreased; the ullage washing approach showed the best inerting performance when the time span of a complete inerting process was the evaluation criterion, but when the decrease of dissolved oxygen concentration in the fuel was also considered to characterize the inerting effective- ness, the approach of ullage washing and fuel scrubbing at the same time was the most effective.
基金supported by the Research Grants Council of the Hong Kong Special Administrative Region, China (Grant 623313)
文摘Fuel cells and flow batteries are promising technologies to address climate change and air pollution problems. An understanding of the complex multiscale and multiphysics transport phenomena occurring in these electrochemical systems requires powerful numerical tools. Over the past decades, the lattice Boltzmann (LB) method has attracted broad interest in the computational fluid dynamics and the numerical heat transfer communities, primarily due to its kinetic nature making it appropriate for modeling complex multiphase transport phenomena. More importantly, the LB method fits well with parallel computing due to its locality feature, which is required for large-scale engineering applications. In this article, we review the LB method for gas-liquid two-phase flows, coupled fluid flow and mass transport in porous media, and particulate flows. Examples of applications are provided in fuel cells and flow batteries. Further developments of the LB method are also outlined.
