Te is widely used in iron and steel industry. After adding a certain amount of Te in the steel, many physical and chemical properties can be improved. As a free-cutting element, a small amount of Te can significantly ...Te is widely used in iron and steel industry. After adding a certain amount of Te in the steel, many physical and chemical properties can be improved. As a free-cutting element, a small amount of Te can significantly improve the machinability of steel. The existing form of Te in the steel, the modification law of MnS inclusion by Te and the influence rule and mechanism of Te on the machinability of steel are summarized and expounded in detail, providing a reference for further study and development of Te-containing free-cutting steels.展开更多
The machinability tests were conducted by using a YD-21 dynamometer on a CA6161A lathe.The experiments were conducted to determine the effect of free-cutting additives on machining characteristics of austenitic stainl...The machinability tests were conducted by using a YD-21 dynamometer on a CA6161A lathe.The experiments were conducted to determine the effect of free-cutting additives on machining characteristics of austenitic stainless steels.The conventional austenitic stainless steel 1Cr18Ni9Ti（steel A） and the free cutting austenitic stainless steel（steel B） were prepared.The results have shown that machinable inclusions were composed of MnS and CuO,and they might be also Ti4C2S2.The presence of Bi in the inclusion was detected by the atom map and electro-probe microanalysis（EPMA）,which might be one of the most important factors to improve the machinability of austenitic stainless steels.The cutting forces for steel B were lower than those of steel A at various cutting speeds;the abrasion depth of the flank of the tool for steel B was less than that of the steel A under the same cutting conditions.The machinability of austenitic stainless steel was visibly improved by adding free-cutting additives,such as S,Cu and Bi.Ultimate tensile,yield strength,and total elongation values of the free cutting austenitic stainless steel were improved due to the addition of these free-cutting additives.展开更多
基金Acknowledgements This work was financially supported by the National Key Research and Development Program of China （No. 2018YFB0704400）, the National Natural Science Foundation of China （Nos. 51474142 and 51671124） and the China Postdoctoral Science Foundation （No. 2018M632082）.
文摘Te is widely used in iron and steel industry. After adding a certain amount of Te in the steel, many physical and chemical properties can be improved. As a free-cutting element, a small amount of Te can significantly improve the machinability of steel. The existing form of Te in the steel, the modification law of MnS inclusion by Te and the influence rule and mechanism of Te on the machinability of steel are summarized and expounded in detail, providing a reference for further study and development of Te-containing free-cutting steels.
基金supported by the National Natural Science Foundation of China(No.50334010)the Educational Department of Liaoning Province,China(No.2008535)the Shenyang City Application Basic Research Project,China(No.1071198-1-00)
文摘The machinability tests were conducted by using a YD-21 dynamometer on a CA6161A lathe.The experiments were conducted to determine the effect of free-cutting additives on machining characteristics of austenitic stainless steels.The conventional austenitic stainless steel 1Cr18Ni9Ti（steel A） and the free cutting austenitic stainless steel（steel B） were prepared.The results have shown that machinable inclusions were composed of MnS and CuO,and they might be also Ti4C2S2.The presence of Bi in the inclusion was detected by the atom map and electro-probe microanalysis（EPMA）,which might be one of the most important factors to improve the machinability of austenitic stainless steels.The cutting forces for steel B were lower than those of steel A at various cutting speeds;the abrasion depth of the flank of the tool for steel B was less than that of the steel A under the same cutting conditions.The machinability of austenitic stainless steel was visibly improved by adding free-cutting additives,such as S,Cu and Bi.Ultimate tensile,yield strength,and total elongation values of the free cutting austenitic stainless steel were improved due to the addition of these free-cutting additives.
