The research and development status of casting magnesium alloys including the commercial casting alloys and the new types casting alloys are reviewed,with more attention to microstructure and mechanical properties of ...The research and development status of casting magnesium alloys including the commercial casting alloys and the new types casting alloys are reviewed,with more attention to microstructure and mechanical properties of modified-AZ91,AM60 and WE43 alloys with various additions,and new types of low cost casting alloys and high strength casting alloys.The modification and/or refinement of Mg2 Si phase in Mg-Al-Si based casting alloys by various additions are discussed and new purifying technologies for casting magnesium alloys are introduced to improve the performance.The modified AZ81 alloy with reduced impurities is found to have the tensile strength of 280 ± 6 MPa and elongation of 16% ± 0.7%.The fatigue strength of AZ91 D alloy could be obviously improved by addition of Ce and Nd.The Mg-16Gd-2Ag-0.3Zr alloy exhibits very high tensile and yield strengths（UTS：423 MPa and YS：328 MPa）;however,its elongation still needs to be improved.展开更多
It is known to all that China is abundant in rare earth resources. But rare earth deposits are really not that rare in the earth crest. In the five continents, i.e. Asia, Europe, Australia, North and South America, an...It is known to all that China is abundant in rare earth resources. But rare earth deposits are really not that rare in the earth crest. In the five continents, i.e. Asia, Europe, Australia, North and South America, and Africa, there are about thirty four countries found to have rare earth deposits; Brazil might surpass China and rank the first in rare earth deposits. At present, investment in rare earth production was surged, there have been about 200 projects, and the total production for 25 of them would be more than 170 thousand tons after 2015, a multi-supply system on rare earths is being established worldwide. Cautions on the investment of rare earth production are involved.展开更多
Aerosol observation was conducted for four seasons from September 2001 to August 2002 at five sampling sites in Hangzhou, South China, on PM10 mass, 22 elements （Na, Mg, AI, Si, P, S, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu...Aerosol observation was conducted for four seasons from September 2001 to August 2002 at five sampling sites in Hangzhou, South China, on PM10 mass, 22 elements （Na, Mg, AI, Si, P, S, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As. Se, Br, Cd, Ba, and Pb）, 5 major ions （F^-, Cl^ , NO3^-, SO4^2- , and NH4^＋）, and organic and elemental carbon （OC and EC）, showing that PM10 mass ranged from 46.7 to 270.8 μg/m^3, with an annual average of 119.2 μg/m^3. Na, AI, Si, S, K, Ca, and Fe were the most abundant elements in PM10, most of S being in the form of SO4^2- . SO4^2-, NO3^-, and NH4^＋ were the major ions, which contributed to about 20% of the PM10 mass. The mean seasonal concentrations for SO4^2- , averaged over all sites, were found to be 18.0, 18.5, 24,Z and 21.4 μg/m^3, for spring, summer, autumn, and winter, respectively, while the corresponding loadings for NO3^- were 7.2, 4.7, 7.1, and 11.2 μg/m^3, and for NH4^＋ were 6.0, 5.9, 8.2, and 9.3 μg/m^3, in the form mostly of NH4NO3 in spring, autumn, and winter, and mostly of （NH4）2SO4 in summer. The low NO3^-/SO4^2- ratio found indicates coal combustion as the major source throughout the year. The mean annual concentrations of OC and EC in PM10 were found to be 21.4, and 4.1 μg/m^3, respectively. Material balance calculation indicated that fugitive dust, the secondary aerosol, and carbonaceous matter were the most abundant species in PM10 for the four seasons, as is characteristic for cities in South China.展开更多
Laser cladding is a promising photon-based surface engineering technique broadly utilized for fabricating harder and wear resistant composite coatings. In spite of excellent properties, the practical applications of l...Laser cladding is a promising photon-based surface engineering technique broadly utilized for fabricating harder and wear resistant composite coatings. In spite of excellent properties, the practical applications of laser claddings are relatively restricted when compared with well-established coating techniques because of their inherent defects identified as cracks, pores and inclusions. Substantial evidence suggests that the incorporation of an appropriate amount of rare earth in laser claddings can remarkably prevent these defects. Additionally, the presence of rare earth in laser claddings can notably enhance tribo-mechanical properties such as surface hardness, modulus of elasticity, fracture toughness, friction coefficient and wear rate. In this literature review, the effect of rare earth in reducing dilution and cracks susceptibility of laser claddings in addition to microstructural refinement attained was examined. Mechanical and tribological properties of these claddings along with their underlying mechanism were discussed in detail. Finally, this article summarizes current applications of laser claddings based on rare earth and was concluded with future research directions.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.51531002,51474043 and 51571043)the Ministry of Education of China(SRFDR 20130191110018)+1 种基金Chongqing Municipal Government(CSTC2013JCYJC60001,CEC project,Two River Scholar Project and The Chief Scientist Studio Project)Fundamental Research Funds for the Central Universities(No.106112015CDJZR135515)
文摘The research and development status of casting magnesium alloys including the commercial casting alloys and the new types casting alloys are reviewed,with more attention to microstructure and mechanical properties of modified-AZ91,AM60 and WE43 alloys with various additions,and new types of low cost casting alloys and high strength casting alloys.The modification and/or refinement of Mg2 Si phase in Mg-Al-Si based casting alloys by various additions are discussed and new purifying technologies for casting magnesium alloys are introduced to improve the performance.The modified AZ81 alloy with reduced impurities is found to have the tensile strength of 280 ± 6 MPa and elongation of 16% ± 0.7%.The fatigue strength of AZ91 D alloy could be obviously improved by addition of Ce and Nd.The Mg-16Gd-2Ag-0.3Zr alloy exhibits very high tensile and yield strengths（UTS：423 MPa and YS：328 MPa）;however,its elongation still needs to be improved.
文摘It is known to all that China is abundant in rare earth resources. But rare earth deposits are really not that rare in the earth crest. In the five continents, i.e. Asia, Europe, Australia, North and South America, and Africa, there are about thirty four countries found to have rare earth deposits; Brazil might surpass China and rank the first in rare earth deposits. At present, investment in rare earth production was surged, there have been about 200 projects, and the total production for 25 of them would be more than 170 thousand tons after 2015, a multi-supply system on rare earths is being established worldwide. Cautions on the investment of rare earth production are involved.
基金supported by the National Natural Science Foun-dation of China (Grants 40675081 and 40599422)
文摘Aerosol observation was conducted for four seasons from September 2001 to August 2002 at five sampling sites in Hangzhou, South China, on PM10 mass, 22 elements （Na, Mg, AI, Si, P, S, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As. Se, Br, Cd, Ba, and Pb）, 5 major ions （F^-, Cl^ , NO3^-, SO4^2- , and NH4^＋）, and organic and elemental carbon （OC and EC）, showing that PM10 mass ranged from 46.7 to 270.8 μg/m^3, with an annual average of 119.2 μg/m^3. Na, AI, Si, S, K, Ca, and Fe were the most abundant elements in PM10, most of S being in the form of SO4^2- . SO4^2-, NO3^-, and NH4^＋ were the major ions, which contributed to about 20% of the PM10 mass. The mean seasonal concentrations for SO4^2- , averaged over all sites, were found to be 18.0, 18.5, 24,Z and 21.4 μg/m^3, for spring, summer, autumn, and winter, respectively, while the corresponding loadings for NO3^- were 7.2, 4.7, 7.1, and 11.2 μg/m^3, and for NH4^＋ were 6.0, 5.9, 8.2, and 9.3 μg/m^3, in the form mostly of NH4NO3 in spring, autumn, and winter, and mostly of （NH4）2SO4 in summer. The low NO3^-/SO4^2- ratio found indicates coal combustion as the major source throughout the year. The mean annual concentrations of OC and EC in PM10 were found to be 21.4, and 4.1 μg/m^3, respectively. Material balance calculation indicated that fugitive dust, the secondary aerosol, and carbonaceous matter were the most abundant species in PM10 for the four seasons, as is characteristic for cities in South China.
基金Project supported by the University of Malaya Research Grant(UMRG,RP013A-13AET)University of Malaya Research Grant(UMRG,RP035A-15AET)
文摘Laser cladding is a promising photon-based surface engineering technique broadly utilized for fabricating harder and wear resistant composite coatings. In spite of excellent properties, the practical applications of laser claddings are relatively restricted when compared with well-established coating techniques because of their inherent defects identified as cracks, pores and inclusions. Substantial evidence suggests that the incorporation of an appropriate amount of rare earth in laser claddings can remarkably prevent these defects. Additionally, the presence of rare earth in laser claddings can notably enhance tribo-mechanical properties such as surface hardness, modulus of elasticity, fracture toughness, friction coefficient and wear rate. In this literature review, the effect of rare earth in reducing dilution and cracks susceptibility of laser claddings in addition to microstructural refinement attained was examined. Mechanical and tribological properties of these claddings along with their underlying mechanism were discussed in detail. Finally, this article summarizes current applications of laser claddings based on rare earth and was concluded with future research directions.
