A new model of porous electrodes based on the Gibbs free energy is developed, in which lithium-ion(Liion) diffusion, diffusion-induced stress(DIS), Butler–Volmer(BV) reaction kinetics, and size polydispersity of elec...A new model of porous electrodes based on the Gibbs free energy is developed, in which lithium-ion(Liion) diffusion, diffusion-induced stress(DIS), Butler–Volmer(BV) reaction kinetics, and size polydispersity of electrode particles are considered. The influence of BV reaction kinetics and concentration-dependent exchange current density(ECD) on concentration profile and DIS evolution are numerically investigated. BV reaction kinetics leads to a decrease in Li-ion concentration and DIS. In addition, concentrationdependent ECD results in a decrease in Li-ion concentration and an increase in DIS. Size polydispersity of electrode particles significantly affects the concentration profile and DIS.Optimal macroscopic state of charge(SOC) should consider the influence of the microscopic SOC values and mass fractions of differently sized particles.展开更多
This work addresses the critical issue of current density distribution in the sliding electrical contact interface based on electromechanical coupling, which is essential for minimizing damage and enhancing performanc...This work addresses the critical issue of current density distribution in the sliding electrical contact interface based on electromechanical coupling, which is essential for minimizing damage and enhancing performance. Using electromechanical coupling analysis and finite element analysis (FEA), the effects of initial contact pressure, pulse current input, and armature speed on current density are examined. Key findings indicate that optimizing the convex rail and armature structures significantly reduces peak current density, improving uniformity and reducing damage. These optimizations enhance the efficiency, accuracy, and service life of sliding electrical contact interfaces, providing a theoretical foundation for designing more durable and efficient high-current-density applications.展开更多
A numerical analysis of galvanic corrosion of hot-dip galvanized steel immersed in seawater was presented. The analysis was based on the boundary element methods （BEMs） coupled with Newton-Raphson iterative techniqu...A numerical analysis of galvanic corrosion of hot-dip galvanized steel immersed in seawater was presented. The analysis was based on the boundary element methods （BEMs） coupled with Newton-Raphson iterative technique to treat the nonlinear boundary conditions, which were determined by the experimental polarization curves. Results showed that galvanic current density concentrates on the boundary of steel substrate and zinc coating, and the sacrificial protection of zinc coating to steel substrate results in overprotection of steel cathode. Not only oxygen reduction but also hydrogen reduction could occur as cathode reactions, which probably led up to the adsorption and absorption of hydrogen atoms. Flat galvanized steel tensile sample shows a brittle behavior similar to hydrogen embrittlement according to the SSRT （show strain rate test） in seawater.展开更多
In the double-sided arc welding system (DSAW) composing of PAW+TIG arcs, the PAW arc is guided by the TIG arc so that the current mostly flows through the direction of the workpiece thickness and the penetration is gr...In the double-sided arc welding system (DSAW) composing of PAW+TIG arcs, the PAW arc is guided by the TIG arc so that the current mostly flows through the direction of the workpiece thickness and the penetration is greatly improved. To analyze the current density distribution in DSAW is beneficial to understanding of this process. Considering all kinds of dynamic factors acting on the weldpool, this paper discusses firstly the surface deformation of the weldpool and the keyhole formation in PAW+TIG DSAW process on the basis of the magnetohydrodynamic theory and variation principles. Hence, a model of the current density distribution is developed. Through numerical simulation, the current density distribution in PAW+TIG DSAW process is quantitatively analyzed. It shows that the minimal radius of keyhole formed in PAW+TIG DSAW process is 0.5 mm and 89.5 percent of current flows through the keyhole.展开更多
When current passes through the solid-liquid interface, the growth rate of crystal, solid-liquid interface energy and radius of curvature at dendritic tip will change. Based on this fact, the theoretical relation betw...When current passes through the solid-liquid interface, the growth rate of crystal, solid-liquid interface energy and radius of curvature at dendritic tip will change. Based on this fact, the theoretical relation between the distribution of solute at solid-liquid interface and current density was established, and the effect of current on the distribution coefficient of solute through effecting the rate of crystal growth, the solid-liquid interface energy and the radius of curvature at the dendritic tip was discussed. The results show that as the current density increases, the distribution coefficient of solute tends to rise in a whole, and when the former is larger than about 400 A/cm 2, the latter varies significantly.展开更多
Magnetic flux density around the weld area was used to reconstruct the current density distribution during resistance spot welding(RSW) of aluminum alloy according to inverse problem theory. A current-magnetic field m...Magnetic flux density around the weld area was used to reconstruct the current density distribution during resistance spot welding(RSW) of aluminum alloy according to inverse problem theory. A current-magnetic field model was established and the conjugate gradient method was used to solve this model. The results showed that the current density was low at the center of nugget while high on the edge of nugget. Moreover, the welding time of 30ms—60 ms is a key period for nucleation. The current density distribution can reflect whether the weld nugget is formed or splashed, therefore it has the potential to monitor the weld quality of RSW.展开更多
The negative DC corona discharge in air at atmospheric pressure was investigated in a needle-to-water system to obtain the pressure distribution of corona ionic wind.The deformation of water surface was measured and t...The negative DC corona discharge in air at atmospheric pressure was investigated in a needle-to-water system to obtain the pressure distribution of corona ionic wind.The deformation of water surface was measured and the distribution of wind pressure over the water surface was calculated.The effects of varying discharge parameters,such as applied voltage,gap spacing,tip radius of needle,and the shape of grounded electrode,on the wind pressure were studied.The measured wind pressure ranges from several Pa to several tens of Pa and up to 33 Pa over a small area;the pressure is comparatively large in the center and decreases quickly outwards.In the experiment system,a higher voltage on a 3 mm gap resulted in a stronger pressure of the ionic wind;around the onset voltage,using a needle with tip radius of 50μm obtained a larger wind pressure than using a needle with 100μm tip radius,but the latter one can produce larger pressure at higher voltages.Plus,the shape of the grounded electrode only influences the wind pressure a little.展开更多
In this paper the recent Magnetic resonance electrical impedance imaging (MREIT) technique is used to image non-invasively the three-dimensional continuous conductivity distribution of the head tissues. With the feasi...In this paper the recent Magnetic resonance electrical impedance imaging (MREIT) technique is used to image non-invasively the three-dimensional continuous conductivity distribution of the head tissues. With the feasibility of the human head being rotated twice in the magnetic resonance imaging (MRI) system, a continuous conductivity reconstruction MREIT algorithm based on two components of the measured magnetic flux density is introduced. The reconstructed conductivity image could be obtained through solving iter- atively a non-linear matrix equation. According to the present algorithm of using two magnetic flux den- sity components, numerical simulations were per- formed on a concentric three-sphere and realistic human head model (consisting of the scalp, skull and brain) with the uniform and non-uniform isotropic target conductivity distributions. Based on the algorithm, the reconstruction of scalp and brain conductivity ratios could be figured out even under the condition that only one current is injected into the brain. The present results show that the three-dimensional continuous conductivity reconstruction method with two magnetic flux density components for the realistic head could get better results than the method with only one magnetic flux density component. Given the skull conductivity ratio, the relative errors of scalp and brain conductivity values were reduced to less than 1% with the uniform conductivity distribution and less than 6.5% with the non-uniform distribution for different noise levels. Furthermore, the algorithm also shows fast convergence and improved robustness against noise.展开更多
基金supported by the Key-Area Research and Development Program of Guangdong Province(2020B090919005)the National Natural Science Foundation of China(21975274 and 52101276)+4 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA22010600)Shandong Provincial Natural Science Foundation(ZR2020KE032 and ZR2022QB160)the Youth Innovation Promotion Association of CAS(2021210)the Shandong Energy Institute(SEI)(SEI I202117)Parts of the work were also supported by the BMWi/BMWK project HiBrain(03ET039G)。
基金financial support by the National Natural Science Foundation of China (Grants 11472165, 11332005)
文摘A new model of porous electrodes based on the Gibbs free energy is developed, in which lithium-ion(Liion) diffusion, diffusion-induced stress(DIS), Butler–Volmer(BV) reaction kinetics, and size polydispersity of electrode particles are considered. The influence of BV reaction kinetics and concentration-dependent exchange current density(ECD) on concentration profile and DIS evolution are numerically investigated. BV reaction kinetics leads to a decrease in Li-ion concentration and DIS. In addition, concentrationdependent ECD results in a decrease in Li-ion concentration and an increase in DIS. Size polydispersity of electrode particles significantly affects the concentration profile and DIS.Optimal macroscopic state of charge(SOC) should consider the influence of the microscopic SOC values and mass fractions of differently sized particles.
文摘This work addresses the critical issue of current density distribution in the sliding electrical contact interface based on electromechanical coupling, which is essential for minimizing damage and enhancing performance. Using electromechanical coupling analysis and finite element analysis (FEA), the effects of initial contact pressure, pulse current input, and armature speed on current density are examined. Key findings indicate that optimizing the convex rail and armature structures significantly reduces peak current density, improving uniformity and reducing damage. These optimizations enhance the efficiency, accuracy, and service life of sliding electrical contact interfaces, providing a theoretical foundation for designing more durable and efficient high-current-density applications.
基金support of National Nat-ural Science Foundation of China (Grant No. 40576038),Doctoral Foundation of Department of Science and Technology of Shandong Province, China (Grant No.2006BS07008).
文摘A numerical analysis of galvanic corrosion of hot-dip galvanized steel immersed in seawater was presented. The analysis was based on the boundary element methods （BEMs） coupled with Newton-Raphson iterative technique to treat the nonlinear boundary conditions, which were determined by the experimental polarization curves. Results showed that galvanic current density concentrates on the boundary of steel substrate and zinc coating, and the sacrificial protection of zinc coating to steel substrate results in overprotection of steel cathode. Not only oxygen reduction but also hydrogen reduction could occur as cathode reactions, which probably led up to the adsorption and absorption of hydrogen atoms. Flat galvanized steel tensile sample shows a brittle behavior similar to hydrogen embrittlement according to the SSRT （show strain rate test） in seawater.
基金The authors wish to express their gratitude to the financial support to this project from the project foundation of the National Key Laboratory of Advanced Welding Production Technology of Harbin Institute of Technology and the US National Science Foundation under grant No.DMI 9812981
文摘In the double-sided arc welding system (DSAW) composing of PAW+TIG arcs, the PAW arc is guided by the TIG arc so that the current mostly flows through the direction of the workpiece thickness and the penetration is greatly improved. To analyze the current density distribution in DSAW is beneficial to understanding of this process. Considering all kinds of dynamic factors acting on the weldpool, this paper discusses firstly the surface deformation of the weldpool and the keyhole formation in PAW+TIG DSAW process on the basis of the magnetohydrodynamic theory and variation principles. Hence, a model of the current density distribution is developed. Through numerical simulation, the current density distribution in PAW+TIG DSAW process is quantitatively analyzed. It shows that the minimal radius of keyhole formed in PAW+TIG DSAW process is 0.5 mm and 89.5 percent of current flows through the keyhole.
文摘When current passes through the solid-liquid interface, the growth rate of crystal, solid-liquid interface energy and radius of curvature at dendritic tip will change. Based on this fact, the theoretical relation between the distribution of solute at solid-liquid interface and current density was established, and the effect of current on the distribution coefficient of solute through effecting the rate of crystal growth, the solid-liquid interface energy and the radius of curvature at the dendritic tip was discussed. The results show that as the current density increases, the distribution coefficient of solute tends to rise in a whole, and when the former is larger than about 400 A/cm 2, the latter varies significantly.
基金Supported by the National Natural Science Foundation of China(No.51275342 and No.51275338)
文摘Magnetic flux density around the weld area was used to reconstruct the current density distribution during resistance spot welding(RSW) of aluminum alloy according to inverse problem theory. A current-magnetic field model was established and the conjugate gradient method was used to solve this model. The results showed that the current density was low at the center of nugget while high on the edge of nugget. Moreover, the welding time of 30ms—60 ms is a key period for nucleation. The current density distribution can reflect whether the weld nugget is formed or splashed, therefore it has the potential to monitor the weld quality of RSW.
基金Project supported by National Key Laboratory of Science and Technology on Electro-mechanical Dynamic Control of China(2011C3606)
文摘The negative DC corona discharge in air at atmospheric pressure was investigated in a needle-to-water system to obtain the pressure distribution of corona ionic wind.The deformation of water surface was measured and the distribution of wind pressure over the water surface was calculated.The effects of varying discharge parameters,such as applied voltage,gap spacing,tip radius of needle,and the shape of grounded electrode,on the wind pressure were studied.The measured wind pressure ranges from several Pa to several tens of Pa and up to 33 Pa over a small area;the pressure is comparatively large in the center and decreases quickly outwards.In the experiment system,a higher voltage on a 3 mm gap resulted in a stronger pressure of the ionic wind;around the onset voltage,using a needle with tip radius of 50μm obtained a larger wind pressure than using a needle with 100μm tip radius,but the latter one can produce larger pressure at higher voltages.Plus,the shape of the grounded electrode only influences the wind pressure a little.
文摘In this paper the recent Magnetic resonance electrical impedance imaging (MREIT) technique is used to image non-invasively the three-dimensional continuous conductivity distribution of the head tissues. With the feasibility of the human head being rotated twice in the magnetic resonance imaging (MRI) system, a continuous conductivity reconstruction MREIT algorithm based on two components of the measured magnetic flux density is introduced. The reconstructed conductivity image could be obtained through solving iter- atively a non-linear matrix equation. According to the present algorithm of using two magnetic flux den- sity components, numerical simulations were per- formed on a concentric three-sphere and realistic human head model (consisting of the scalp, skull and brain) with the uniform and non-uniform isotropic target conductivity distributions. Based on the algorithm, the reconstruction of scalp and brain conductivity ratios could be figured out even under the condition that only one current is injected into the brain. The present results show that the three-dimensional continuous conductivity reconstruction method with two magnetic flux density components for the realistic head could get better results than the method with only one magnetic flux density component. Given the skull conductivity ratio, the relative errors of scalp and brain conductivity values were reduced to less than 1% with the uniform conductivity distribution and less than 6.5% with the non-uniform distribution for different noise levels. Furthermore, the algorithm also shows fast convergence and improved robustness against noise.
