In this paper, a new discrimination diagram using absolute measures of Th and Nb is applied to postArchean ophiolites to best discriminate a large number of different ophiolitic basalts. This diagram was obtained usi...In this paper, a new discrimination diagram using absolute measures of Th and Nb is applied to postArchean ophiolites to best discriminate a large number of different ophiolitic basalts. This diagram was obtained using 〉2000 known ophiolitic basalts and was tested using -560 modern rocks from known tectonic settings. Ten different basaltic varieties from worldwide ophiolitic complexes have been examined. They include two basaltic types that have never been considered before, which are： （1） medium-Ti basalts （MTB） generated at nascent forearc settings; （2） a type of mid-ocean ridge basalts showing garnet signature （G-MORB） that characterizes Alpine-type （i,e., non volcanic） rifted margins and ocean-continent transition zones （OCTZ）. In the Th-Nb diagram, basalts generated in oceanic subductionunrelated settings, rifted margins, and OCTZ can be distinguished from subduction-related basalts with a misclassification rate 〈 1%. This diagram highlights the chemical variation of oceanic, rifted margin, and OCTZ basalts from depleted compositions to progressively more enriched compositions reflecting, in turn, the variance of source composition and degree of melting within the MORB-OIB array. It also highlights the chemical contributions of enriched （OIB-type） components to mantle sources. Enrichment of Th relative to Nb is particularly effective for highlighting crustal input via subduction or crustal contamination. Basalts formed at continental margin arcs and island arc with a complex polygenetic crust can be distinguished from those generated in intra-oceanic arcs in supra-subducrion zones （SSZ） with a misclassification rate 〈1%. Within the SSZ group, two sub-settings can be recognized with a misclassification rate 〈0.5%. They are： （1） SSZ influenced by chemical contribution from subduction- derived components （forearc and intra-arc sub-settings） characterized by island arc tholeiitic （IAT） and boninitic basalts; （2） SSZ with no contribution from subduction-展开更多
The conventional forming limit diagram （FLD） is described as a plot of major strain versus minor strain. However, FLD is dependent on forming history and strain path. In the present study, a forming limit stress-bas...The conventional forming limit diagram （FLD） is described as a plot of major strain versus minor strain. However, FLD is dependent on forming history and strain path. In the present study, a forming limit stress-based diagram （FLSD） has been adopted to predict the fracture limit of aluminum alloy （AA） 5052-O1 sheet. Nakazima test is simulated by plastic constitutive formula derived from the modified Gurson-Tvergaard-Needleman （GTN） model. An in situ tensile test with scanning electron microscope （SEM） is proposed to determine the parameters in GTN model. The damage evolution is observed and recorded, and the parameters of GTN model are identified through counting void fraction at three damage stages of AA5052-O 1. According to the experimental results, the original void volume fraction, the volume fraction of potential nucleated voids, the critical void volume fraction, the void volume fraction at the final failure of material are assigned as 0.002 918, 0.024 9, 0.030 103, 0.048 54, respectively. The stress and strain are obtained at the last loading step before crack. FLSD and FLD of AA5052-O 1 are plotted. Compared with the experimental Nakazima test and uniaxial tensile test, the predicted results show a good agreement. The parameters determined by in situ tensile test can be applied to the research of the forming limit for ductile metals.展开更多
Several 35CrMo4 and 38MnV7 steels with different additions of Ti and V were manufactured by electroslag remelting. The influence of the alloying and microalloying elements on phase transformation at different cooling ...Several 35CrMo4 and 38MnV7 steels with different additions of Ti and V were manufactured by electroslag remelting. The influence of the alloying and microalloying elements on phase transformation at different cooling rates was studied and the continuous cooling transformation diagrams were plotted. In order to optimize the heat treatment and improve the mechanical properties, the range of cooling rates leading to a fully bainitic microstructure （without ferrite, pearlite and especially without martensite） was determined. Bainite and martensite transformation start temperatures （Bs, Ms） were also established and compared with the values predicted by empirical equations. The important role of precipitates （especially V carbonitride particles） on final microstructure and mechanical properties was assessed.展开更多
High strength aluminum alloy plate has a low elongation at room temperature, which leads to the forming of its components need a high temperature. Liquid or gas is used as the pressure-transfer medium in the existing ...High strength aluminum alloy plate has a low elongation at room temperature, which leads to the forming of its components need a high temperature. Liquid or gas is used as the pressure-transfer medium in the existing flexible mould forming process, the heat resistance of the medium and pressurizing device makes the application of aluminum alloy plate thermoforming restricted. To solve this problem, the existing medium is replaced by the heat-resisting solid granules and the general pressure equipments are applied. Based on the pressure-transfer performance test of the solid granules medium, the feasibility that the assumption of the extended Drucker-Prager linear model can be used in the finite element analysis is proved. The constitutive equation, the yield function and the theoretical forming limit diagram（FLD） of AA7075 sheet are established. Through the finite element numerical simulation of hot granules medium pressure forming（HGMF） process, not only the influence laws of the process parameters, such as forming temperature, the blank-holder gap and the diameter of the slab, on sheet metal forming performance are discussed, but also the broken area of the forming process is analyzed and predicted, which are coincided with the technological test. The conical part whose half cone angle is 15° and relative height H/d0 is 0.57, is formed in one process at 250℃. The HGMF process solves the problems of loading and seal in the existing flexible mould forming process and provides a novel technology for thermoforming of light alloy plate, such as magnesium alloy, aluminium alloy and titanium alloy.展开更多
During path planning, it is necessary to satisfy the requirements of multiple objectives. Multi-objective synthesis is based on the need of flight mission and subjectivity inclination of decision-maker. The decision-m...During path planning, it is necessary to satisfy the requirements of multiple objectives. Multi-objective synthesis is based on the need of flight mission and subjectivity inclination of decision-maker. The decision-maker, however, has illegibility for under- standing the requirements of multiple objectives and the subjectivity inclination. It is important to develop a reasonable cost performance index for describing the illegibility of the decision-maker in multi-objective path planning. Based on Voronoi dia- gram method for the path planning, this paper studies the synthesis method of the multi-objective cost performance index. Ac- cording to the application of the cost performance index to the path planning based on Voronoi diagram method, this paper ana- lyzes the cost performance index which has been referred to at present. The analysis shows the insufficiency of the cost per- formance index at present, i.e., it is difficult to synthesize sub-objective flmctions because of the great disparity of the sub-objective fimctions. Thus, a new approach is developed to optimize the cost performance index with the multi-objective fuzzy optimization strategy, and an improved performance index is established, which could coordinate the weight conflict of the sub-objective functions. Finally, the experimental result shows the effectiveness of the proposed approach.展开更多
Repeated unidirectional bending （RUB） was carried out to improve the texture of commercial AZ31B magnesium alloy sheets. All specimens were prepared in the rolling direction. The forming limit diagrams （FLDs） of A...Repeated unidirectional bending （RUB） was carried out to improve the texture of commercial AZ31B magnesium alloy sheets. All specimens were prepared in the rolling direction. The forming limit diagrams （FLDs） of AZ31B magnesium alloy sheet were determined experimentally by conducting stretch-forming tests at room temperature, 100, 200 and 300 ℃ Compared with the as-received sheet, the lowest limited strain of AZ31B magnesium alloy sheet with tilted texture in the FLD increased by 79% at room temperature and 104% at 100 ℃. The texture also affected the extension of the forming limit curves （FLC） in the FLD. However, the FLCs of two kinds of sheets almost overlapped at temperature above 200 ℃. It can be concluded that the reduction of （0002） texture intensity is effective to the improvement of formability not only at room temperature but also at low-and-medium temperature. The effect of texture on FLDs becomes weak with increasing temperature.展开更多
The feasibility of oxidation leaching process of nickel from nickel sulfide ore and the form of different components in the lixivium has been studied at first. The method of leaching nickel sulfide concentration direc...The feasibility of oxidation leaching process of nickel from nickel sulfide ore and the form of different components in the lixivium has been studied at first. The method of leaching nickel sulfide concentration directly by oxidants with existence of ultrasonic has been advanced. The process of leaching nickel from nickel sulfide concentration by using the system of persulfate and silver has been determined. The influence of different factors on the leaching rates of nickel,such as with and without ultrasonic,the concentration of Na2S2O8,liquid-solid ratio and the concentration of AgNO3 have been explored. The results show that:(1) in the oxidative leaching system,nickel can be leached completely as Ni2+ or NiSO4(aq.) from nickel sulfide concentration in theory;(2) the nicopyrite can not exist steadily in the persulfate acid leaching system,but Ni2+can. Meanwhile,sulfur may be existed steadily in the leaching process;(3) nicopyrite with much lower electrostatic potential may be leached earlier than chalcopyrite and sideropyrite;and(4) the overall reaction rate of the leaching process can be enhanced with ultrasonic radiation,but it does not change the mechanism of leaching. The more oxidant concentration or higher liquid-solid ratio is,the higher leaching percentage of nickel. The leaching percentage of nickel can be increased significantly by adding a small amount of AgNO3 during the leaching processes. Under the same conditions,the higher concentration of AgNO3 is,the higher leaching yields of nickel will be obtained.展开更多
文摘In this paper, a new discrimination diagram using absolute measures of Th and Nb is applied to postArchean ophiolites to best discriminate a large number of different ophiolitic basalts. This diagram was obtained using 〉2000 known ophiolitic basalts and was tested using -560 modern rocks from known tectonic settings. Ten different basaltic varieties from worldwide ophiolitic complexes have been examined. They include two basaltic types that have never been considered before, which are： （1） medium-Ti basalts （MTB） generated at nascent forearc settings; （2） a type of mid-ocean ridge basalts showing garnet signature （G-MORB） that characterizes Alpine-type （i,e., non volcanic） rifted margins and ocean-continent transition zones （OCTZ）. In the Th-Nb diagram, basalts generated in oceanic subductionunrelated settings, rifted margins, and OCTZ can be distinguished from subduction-related basalts with a misclassification rate 〈 1%. This diagram highlights the chemical variation of oceanic, rifted margin, and OCTZ basalts from depleted compositions to progressively more enriched compositions reflecting, in turn, the variance of source composition and degree of melting within the MORB-OIB array. It also highlights the chemical contributions of enriched （OIB-type） components to mantle sources. Enrichment of Th relative to Nb is particularly effective for highlighting crustal input via subduction or crustal contamination. Basalts formed at continental margin arcs and island arc with a complex polygenetic crust can be distinguished from those generated in intra-oceanic arcs in supra-subducrion zones （SSZ） with a misclassification rate 〈1%. Within the SSZ group, two sub-settings can be recognized with a misclassification rate 〈0.5%. They are： （1） SSZ influenced by chemical contribution from subduction- derived components （forearc and intra-arc sub-settings） characterized by island arc tholeiitic （IAT） and boninitic basalts; （2） SSZ with no contribution from subduction-
基金Aeronautical Science Foundation of China （03H53048）
文摘The conventional forming limit diagram （FLD） is described as a plot of major strain versus minor strain. However, FLD is dependent on forming history and strain path. In the present study, a forming limit stress-based diagram （FLSD） has been adopted to predict the fracture limit of aluminum alloy （AA） 5052-O1 sheet. Nakazima test is simulated by plastic constitutive formula derived from the modified Gurson-Tvergaard-Needleman （GTN） model. An in situ tensile test with scanning electron microscope （SEM） is proposed to determine the parameters in GTN model. The damage evolution is observed and recorded, and the parameters of GTN model are identified through counting void fraction at three damage stages of AA5052-O 1. According to the experimental results, the original void volume fraction, the volume fraction of potential nucleated voids, the critical void volume fraction, the void volume fraction at the final failure of material are assigned as 0.002 918, 0.024 9, 0.030 103, 0.048 54, respectively. The stress and strain are obtained at the last loading step before crack. FLSD and FLD of AA5052-O 1 are plotted. Compared with the experimental Nakazima test and uniaxial tensile test, the predicted results show a good agreement. The parameters determined by in situ tensile test can be applied to the research of the forming limit for ductile metals.
基金the financial support of Spanish Ministry of Economy and Competitiveness through the project ref.MAT2011-29039-C02-02
文摘Several 35CrMo4 and 38MnV7 steels with different additions of Ti and V were manufactured by electroslag remelting. The influence of the alloying and microalloying elements on phase transformation at different cooling rates was studied and the continuous cooling transformation diagrams were plotted. In order to optimize the heat treatment and improve the mechanical properties, the range of cooling rates leading to a fully bainitic microstructure （without ferrite, pearlite and especially without martensite） was determined. Bainite and martensite transformation start temperatures （Bs, Ms） were also established and compared with the values predicted by empirical equations. The important role of precipitates （especially V carbonitride particles） on final microstructure and mechanical properties was assessed.
基金Supported by National Natural Science Foundation of China(Grant Nos.51305386,51305385)Hebei Provincial Natural Science Foundation of China(Grant No.E2013203093)
文摘High strength aluminum alloy plate has a low elongation at room temperature, which leads to the forming of its components need a high temperature. Liquid or gas is used as the pressure-transfer medium in the existing flexible mould forming process, the heat resistance of the medium and pressurizing device makes the application of aluminum alloy plate thermoforming restricted. To solve this problem, the existing medium is replaced by the heat-resisting solid granules and the general pressure equipments are applied. Based on the pressure-transfer performance test of the solid granules medium, the feasibility that the assumption of the extended Drucker-Prager linear model can be used in the finite element analysis is proved. The constitutive equation, the yield function and the theoretical forming limit diagram（FLD） of AA7075 sheet are established. Through the finite element numerical simulation of hot granules medium pressure forming（HGMF） process, not only the influence laws of the process parameters, such as forming temperature, the blank-holder gap and the diameter of the slab, on sheet metal forming performance are discussed, but also the broken area of the forming process is analyzed and predicted, which are coincided with the technological test. The conical part whose half cone angle is 15° and relative height H/d0 is 0.57, is formed in one process at 250℃. The HGMF process solves the problems of loading and seal in the existing flexible mould forming process and provides a novel technology for thermoforming of light alloy plate, such as magnesium alloy, aluminium alloy and titanium alloy.
文摘During path planning, it is necessary to satisfy the requirements of multiple objectives. Multi-objective synthesis is based on the need of flight mission and subjectivity inclination of decision-maker. The decision-maker, however, has illegibility for under- standing the requirements of multiple objectives and the subjectivity inclination. It is important to develop a reasonable cost performance index for describing the illegibility of the decision-maker in multi-objective path planning. Based on Voronoi dia- gram method for the path planning, this paper studies the synthesis method of the multi-objective cost performance index. Ac- cording to the application of the cost performance index to the path planning based on Voronoi diagram method, this paper ana- lyzes the cost performance index which has been referred to at present. The analysis shows the insufficiency of the cost per- formance index at present, i.e., it is difficult to synthesize sub-objective flmctions because of the great disparity of the sub-objective fimctions. Thus, a new approach is developed to optimize the cost performance index with the multi-objective fuzzy optimization strategy, and an improved performance index is established, which could coordinate the weight conflict of the sub-objective functions. Finally, the experimental result shows the effectiveness of the proposed approach.
基金Project(CSTC2010AA4035)supported by Scientific and Technological Project of Chongqing Science and Technology Commission,ChinaProject(50504019)supported by the National Natural Science Foundation of China+1 种基金Project(CDJZR11130008)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(CDJXS10130001)supported by the Chongqing University Postgraduates'Science and Innovation Fund,China
文摘Repeated unidirectional bending （RUB） was carried out to improve the texture of commercial AZ31B magnesium alloy sheets. All specimens were prepared in the rolling direction. The forming limit diagrams （FLDs） of AZ31B magnesium alloy sheet were determined experimentally by conducting stretch-forming tests at room temperature, 100, 200 and 300 ℃ Compared with the as-received sheet, the lowest limited strain of AZ31B magnesium alloy sheet with tilted texture in the FLD increased by 79% at room temperature and 104% at 100 ℃. The texture also affected the extension of the forming limit curves （FLC） in the FLD. However, the FLCs of two kinds of sheets almost overlapped at temperature above 200 ℃. It can be concluded that the reduction of （0002） texture intensity is effective to the improvement of formability not only at room temperature but also at low-and-medium temperature. The effect of texture on FLDs becomes weak with increasing temperature.
基金Supported by the National Natural Science Foundation of China （50874087 50978212） the Key Projects in the National Science and Technology Pillar Program （2009BAA20B02）
文摘The feasibility of oxidation leaching process of nickel from nickel sulfide ore and the form of different components in the lixivium has been studied at first. The method of leaching nickel sulfide concentration directly by oxidants with existence of ultrasonic has been advanced. The process of leaching nickel from nickel sulfide concentration by using the system of persulfate and silver has been determined. The influence of different factors on the leaching rates of nickel,such as with and without ultrasonic,the concentration of Na2S2O8,liquid-solid ratio and the concentration of AgNO3 have been explored. The results show that:(1) in the oxidative leaching system,nickel can be leached completely as Ni2+ or NiSO4(aq.) from nickel sulfide concentration in theory;(2) the nicopyrite can not exist steadily in the persulfate acid leaching system,but Ni2+can. Meanwhile,sulfur may be existed steadily in the leaching process;(3) nicopyrite with much lower electrostatic potential may be leached earlier than chalcopyrite and sideropyrite;and(4) the overall reaction rate of the leaching process can be enhanced with ultrasonic radiation,but it does not change the mechanism of leaching. The more oxidant concentration or higher liquid-solid ratio is,the higher leaching percentage of nickel. The leaching percentage of nickel can be increased significantly by adding a small amount of AgNO3 during the leaching processes. Under the same conditions,the higher concentration of AgNO3 is,the higher leaching yields of nickel will be obtained.
