Previous constitutive models of granite shear creep have two limitations：（1） although moisture greatly affects granite shear creep behavior, currently there are no constitutive models that include this factor;（2）...Previous constitutive models of granite shear creep have two limitations：（1） although moisture greatly affects granite shear creep behavior, currently there are no constitutive models that include this factor;（2） there are also no models that include an acceleration stage. This paper presents an improved Burgers constitutive model with the addition of a damage parameter to characterize the moisture effect and uses a nonlinear relation equation between stress and strain for inclusion as the acceleration stage. The damage parameter is determined from granite creep experiment under four different moisture contents（0%, 0.22%, 0.49%, and 0.79%）. The nonlinear relation equation is obtained by fitting a dataset of stain versus time under five different loading stages. To verify the presented model, a creep experiment was conducted on other granite samples and the results show that the model agrees well with the experimental observation data.展开更多
The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and ...The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and under the stress of 140-210 MPa for 16 h.Based on these experimental data,material constitutive equations which can well characterize creep aging behaviors of the tested alloy were developed.The effect of interior stress distributed along the sheet thickness on springback was simulated using FE software MSC.MARC by compiling the established constitutive models into the user subroutine.The simulation results showed that the amount of sheet springback was 61.12% when merely considering tensile stress existing along the sheet thickness;while sheet springback was up to 65.93% when taking both tensile and compressive stresses into account.In addition,an AA2524 rectangular sheet was subjected to CAF experiment in resistance furnace.The springback value of the formed rectangular sheet was 68.2%,which was much closer to 65.93%.This confirms that both tensile and compressive stresses across the sheet thickness should be considered in accurately predicting springback of the sheet after forming,which can be more consistent with experimental results.展开更多
基金supported by the National Natural Science Foundation of China (No. 41172281)the National Basic Research Program of China (No. 2011CB710604)the Opening Foundation of the State Key Laboratory of Continental Dynamics, Northwest University (No. 201210126)
文摘Previous constitutive models of granite shear creep have two limitations：（1） although moisture greatly affects granite shear creep behavior, currently there are no constitutive models that include this factor;（2） there are also no models that include an acceleration stage. This paper presents an improved Burgers constitutive model with the addition of a damage parameter to characterize the moisture effect and uses a nonlinear relation equation between stress and strain for inclusion as the acceleration stage. The damage parameter is determined from granite creep experiment under four different moisture contents（0%, 0.22%, 0.49%, and 0.79%）. The nonlinear relation equation is obtained by fitting a dataset of stain versus time under five different loading stages. To verify the presented model, a creep experiment was conducted on other granite samples and the results show that the model agrees well with the experimental observation data.
基金Project(2014CB046602)supported by the National Basic Research Program of ChinaProject(20120162110003)supported by Ph D Programs Foundation of Ministry of Education of China
文摘The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and under the stress of 140-210 MPa for 16 h.Based on these experimental data,material constitutive equations which can well characterize creep aging behaviors of the tested alloy were developed.The effect of interior stress distributed along the sheet thickness on springback was simulated using FE software MSC.MARC by compiling the established constitutive models into the user subroutine.The simulation results showed that the amount of sheet springback was 61.12% when merely considering tensile stress existing along the sheet thickness;while sheet springback was up to 65.93% when taking both tensile and compressive stresses into account.In addition,an AA2524 rectangular sheet was subjected to CAF experiment in resistance furnace.The springback value of the formed rectangular sheet was 68.2%,which was much closer to 65.93%.This confirms that both tensile and compressive stresses across the sheet thickness should be considered in accurately predicting springback of the sheet after forming,which can be more consistent with experimental results.
