This paper proposes a robust dichotomy-based model predictive control(DS-MPC)with a fixed switching frequency for the grid-connected inverter(GCI).The proposed fast dichotomy algorithm can select and deduce the optima...This paper proposes a robust dichotomy-based model predictive control(DS-MPC)with a fixed switching frequency for the grid-connected inverter(GCI).The proposed fast dichotomy algorithm can select and deduce the optimal voltage vector dynamically through the space vector plane.Therefore,the proposed DS-MPC strategy could ensure dynamic performance and steady-state performance as well.Also,the current control robustness can be improved through DS-MPC with disturbance observer(DO)based on the extended Kalman filter(EKF).The novelty of this control is that the current control with fast dynamic response can be realized in the weak grid,even if the grid voltages are greatly distorted.Simulation and hardware experiments on the weak grid validate the effectiveness of the proposed DS-MPC with the EKF observer approach.展开更多
Improper handling of vehicle on-ramp merging may hinder traffic flow and contribute to lower fuel economy,while also increasing the risk of collisions.Cooperative control for connected and automated vehicles(CAVs)has ...Improper handling of vehicle on-ramp merging may hinder traffic flow and contribute to lower fuel economy,while also increasing the risk of collisions.Cooperative control for connected and automated vehicles(CAVs)has the potential to significantly reduce negative environmental impact while also improve driving safety and traffic efficiency.Therefore,in this paper,we focus on the scenario of CAVs on-ramp merging and propose a centralized control method.Merging sequence(MS)allocation and motion planning are two key issues in this process.To deal with these problems,we first propose an MS allocation method based on a complete information static game whereby the mixed-strategy Nash equilibrium is calculated for an individual vehicle to select its strategy.The on-ramp merging problem is then formulated as a bi-objective(total fuel consumption and total travel time)optimization problem,to which optimal control based on Pontryagin's minimum principle(PMP)is applied to solve the motion planning issue.To determine the proper parameters in the bi-objective optimization problem,a varying-scale grid search method is proposed to explore possible solutions at different scales.In this method,an improved quicksort algorithm is designed to search for the Pareto front,and the(approximately)unbiased Pareto solution for the bi-objective optimization problem is finally determined as the optimal solution.The proposed on-ramp merging strategy is validated via numerical simulation,and comparison with other strategies demonstrates its effectiveness in terms of fuel economy and traffic efficiency.展开更多
The Virtual Resistor based Active Damping(VR-AD) is widely employed in converters connected to the grid via LCL filters in order to mitigate the inherent resonance of the filters. Nevertheless, in digitally controlled...The Virtual Resistor based Active Damping(VR-AD) is widely employed in converters connected to the grid via LCL filters in order to mitigate the inherent resonance of the filters. Nevertheless, in digitally controlled systems, the PWM and the calculating delays modify the system characteristics in terms of frequency and phase, thus destabilizing the system and degrading the VR-AD performances, mainly in low switching frequencies. Moreover, the stability of the system is greatly affected under weak grid operation characterized by large grid impedance variation. This paper solves these problems by proposing a systematic, robust and optimized design procedure of voltage oriented PI control(VOC) with VRAD. The considered design procedure ensures robust control(sufficient stability margins) and high quality of grid current(reduced steady-state error and minimized THD value) despite the negative impact of digital time delay, grid impedance variation and filter parameters change. Simulation and experimental results are presented to show robustness and efficiency of the suggested design procedure.展开更多
文摘This paper proposes a robust dichotomy-based model predictive control(DS-MPC)with a fixed switching frequency for the grid-connected inverter(GCI).The proposed fast dichotomy algorithm can select and deduce the optimal voltage vector dynamically through the space vector plane.Therefore,the proposed DS-MPC strategy could ensure dynamic performance and steady-state performance as well.Also,the current control robustness can be improved through DS-MPC with disturbance observer(DO)based on the extended Kalman filter(EKF).The novelty of this control is that the current control with fast dynamic response can be realized in the weak grid,even if the grid voltages are greatly distorted.Simulation and hardware experiments on the weak grid validate the effectiveness of the proposed DS-MPC with the EKF observer approach.
基金supported in by National Natural Science Foundation of China (No.61903046)Key Research and Development Program of Shaanxi Province (No.2021GY-290)+2 种基金Youth Talent Lift Project of Shaanxi Association for Science and Technology (No.20200106)Joint Laboratory for Internet of Vehicles,Ministry of Education-China Mobile Communications Corporation (No.213024170015)Fundamental Research Funds for the Central Universities (No. 300102240106)
文摘Improper handling of vehicle on-ramp merging may hinder traffic flow and contribute to lower fuel economy,while also increasing the risk of collisions.Cooperative control for connected and automated vehicles(CAVs)has the potential to significantly reduce negative environmental impact while also improve driving safety and traffic efficiency.Therefore,in this paper,we focus on the scenario of CAVs on-ramp merging and propose a centralized control method.Merging sequence(MS)allocation and motion planning are two key issues in this process.To deal with these problems,we first propose an MS allocation method based on a complete information static game whereby the mixed-strategy Nash equilibrium is calculated for an individual vehicle to select its strategy.The on-ramp merging problem is then formulated as a bi-objective(total fuel consumption and total travel time)optimization problem,to which optimal control based on Pontryagin's minimum principle(PMP)is applied to solve the motion planning issue.To determine the proper parameters in the bi-objective optimization problem,a varying-scale grid search method is proposed to explore possible solutions at different scales.In this method,an improved quicksort algorithm is designed to search for the Pareto front,and the(approximately)unbiased Pareto solution for the bi-objective optimization problem is finally determined as the optimal solution.The proposed on-ramp merging strategy is validated via numerical simulation,and comparison with other strategies demonstrates its effectiveness in terms of fuel economy and traffic efficiency.
基金supported by the Tunisian Ministry of High Education and Research under Grant LSE-ENIT-LR11ES15
文摘The Virtual Resistor based Active Damping(VR-AD) is widely employed in converters connected to the grid via LCL filters in order to mitigate the inherent resonance of the filters. Nevertheless, in digitally controlled systems, the PWM and the calculating delays modify the system characteristics in terms of frequency and phase, thus destabilizing the system and degrading the VR-AD performances, mainly in low switching frequencies. Moreover, the stability of the system is greatly affected under weak grid operation characterized by large grid impedance variation. This paper solves these problems by proposing a systematic, robust and optimized design procedure of voltage oriented PI control(VOC) with VRAD. The considered design procedure ensures robust control(sufficient stability margins) and high quality of grid current(reduced steady-state error and minimized THD value) despite the negative impact of digital time delay, grid impedance variation and filter parameters change. Simulation and experimental results are presented to show robustness and efficiency of the suggested design procedure.
