Experimental investigation is conducted to investigate the flow and heat transfer performances of jet impingement cooling inside a semi-confined smooth channel.Effects of jet Reynolds number(varied from 10 000to 45000...Experimental investigation is conducted to investigate the flow and heat transfer performances of jet impingement cooling inside a semi-confined smooth channel.Effects of jet Reynolds number(varied from 10 000to 45000),orifice-to-target spacing(zn=1d—4d)and jet-to-jet pitches(xn=3d—5d,yn=3d—5d)on the convective heat transfer coefficient and discharge coefficient are revealed.For a single-row jets normal impingement,the impingement heat transfer is enhanced with the increase of impingement Reynolds number or the decrease of spanwise jet-to-jet pitch.The highest local heat transfer is achieved when zn/dis 2.For the double-row jets normal impingement,the laterally-averaged Nusselt number distributions in the vicinity of the first row jets impinging stagnation do not fit well with the single-row case.The highest local heat transfer is obtained when zn/dis 1.A smaller jetto-jet pitch generally results in a lower discharge coefficient.The discharge coefficient in the double-row case is decreased relative to the single-row case at the same impingement Reynolds number.展开更多
A numerical simulation on confined impinging circular jet working with a mixture of water and Al2O3 nanoparticles is investigated. The flow is turbulent and a constant heat flux is applied on the heated plate. A two-p...A numerical simulation on confined impinging circular jet working with a mixture of water and Al2O3 nanoparticles is investigated. The flow is turbulent and a constant heat flux is applied on the heated plate. A two-phase mixture model approach has been adopted. Different nozzle-to-plate distance, nanoparticle volume concentrations and Reynolds number have been considered to study the thermal performances of the system in terms of local, average and stagnation point Nusselt number. The local Nusselt number profiles show that the highest values within the stagnation point region, and the lowest at the end of the heated plate. It is observed that the average Nusselt number increases for increasing nanoparticle concentrations, moreover, the highest values are observed for H/D=5, and a maximum increase of 10% is obtained at a concentration equal to 5%.展开更多
The extraction fraction E and overall volumetric mass transfer coefficient kka of TBP extracting butyric acid pro- cess in confined impinging jet reactors （CIJR） with two jets were investigated. The main variables t...The extraction fraction E and overall volumetric mass transfer coefficient kka of TBP extracting butyric acid pro- cess in confined impinging jet reactors （CIJR） with two jets were investigated. The main variables tested were the concentration of tri-butyl-phosphate （TBP） and butyric acid, the impinging velocity V, the impinging velocityratio of two phases Vorg/Vaq, the nozzle inner diameter di and the distance L between the jet axes and the top wall of the impinging chamber. The results showed that E and kLa increase with an increase of the impinging velocity V, the concentration ofTBP Corg, and the impinging velocity ratio Vor/Vaq. However, E and kta decrease with an increase of the inner diameter d1 from 1 to 2 mm, the concentration of butyric acid Caq from 0.5% （v/v） to 2% （v/v）. The factor L ranging from 3 to 11 mm has a negligible effect on E and kLa. A correlation on these variables and kLa was proposed based on the experimental data. These results indicated good mass transfer oerformance of CIJR in the extraction operation.展开更多
An aqueous nanosuspension of agrochemicals unlike pharmaceutics has to achieve massive production in an effective way,capable to ensure sufficient profits in commercialization.This work implements the flash nanoprecip...An aqueous nanosuspension of agrochemicals unlike pharmaceutics has to achieve massive production in an effective way,capable to ensure sufficient profits in commercialization.This work implements the flash nanoprecipitation(FNP)technique to effectively generate agrochemical nanosuspension,anticipatedly overcoming such an obstacle.Azoxystrobin,a broad spectrum fungicide,in either acetone or ethanol is used herein as a mode agrochemical.To ensure a green and practical utilization,three kinds of commercially available and eco-friendly surfactants,i.e.,poly(ethylene glycol)-block-poly(lactic-co-glycolic acid)(PEG-b-PLGA),Tween 80 and alkyl polyglucosides(APGs),are employed for stabilizing the nanoparticles.The results show that the polymeric stabilizer,PEG-b-PLGA,has the best stabilization efficiency,and can maintain the particles below 100 nm for at least three weeks.The azoxystrobin load of the nanoparticles reaches as high as 77 wt.%,beneficial to enhancing the biological potency.Moreover,the FNP brings the particles a much smaller size,narrower size distribution,better size stability,and higher biological efficacy than the ones made via a traditional method of the drop and stir(DS).The nanosuspensions present superior fungicidal performances over a prevailing counterpart from Syngenta.This study proves an enhanced biological potency and reduced dosage of agrochemical nanosuspension made via the FNP,indicating a remarkable advantage of the FNP over the conventional preparation.The integration of a super-high load,eco-friendly excipients,intensified preparation process,enhanced potency,and reduced dosage creates a promising pathway to generate a green aqueous nanosuspension of agrochemicals.展开更多
基金Supported by the National Natural Science Foundation of China(51276090)
文摘Experimental investigation is conducted to investigate the flow and heat transfer performances of jet impingement cooling inside a semi-confined smooth channel.Effects of jet Reynolds number(varied from 10 000to 45000),orifice-to-target spacing(zn=1d—4d)and jet-to-jet pitches(xn=3d—5d,yn=3d—5d)on the convective heat transfer coefficient and discharge coefficient are revealed.For a single-row jets normal impingement,the impingement heat transfer is enhanced with the increase of impingement Reynolds number or the decrease of spanwise jet-to-jet pitch.The highest local heat transfer is achieved when zn/dis 2.For the double-row jets normal impingement,the laterally-averaged Nusselt number distributions in the vicinity of the first row jets impinging stagnation do not fit well with the single-row case.The highest local heat transfer is obtained when zn/dis 1.A smaller jetto-jet pitch generally results in a lower discharge coefficient.The discharge coefficient in the double-row case is decreased relative to the single-row case at the same impingement Reynolds number.
文摘A numerical simulation on confined impinging circular jet working with a mixture of water and Al2O3 nanoparticles is investigated. The flow is turbulent and a constant heat flux is applied on the heated plate. A two-phase mixture model approach has been adopted. Different nozzle-to-plate distance, nanoparticle volume concentrations and Reynolds number have been considered to study the thermal performances of the system in terms of local, average and stagnation point Nusselt number. The local Nusselt number profiles show that the highest values within the stagnation point region, and the lowest at the end of the heated plate. It is observed that the average Nusselt number increases for increasing nanoparticle concentrations, moreover, the highest values are observed for H/D=5, and a maximum increase of 10% is obtained at a concentration equal to 5%.
基金Supported by the National Natural Science Foundation of China(21206002,21376016)the State Key Laboratory of Chemical Engineering(SKL-Ch E-13A03)
文摘The extraction fraction E and overall volumetric mass transfer coefficient kka of TBP extracting butyric acid pro- cess in confined impinging jet reactors （CIJR） with two jets were investigated. The main variables tested were the concentration of tri-butyl-phosphate （TBP） and butyric acid, the impinging velocity V, the impinging velocityratio of two phases Vorg/Vaq, the nozzle inner diameter di and the distance L between the jet axes and the top wall of the impinging chamber. The results showed that E and kLa increase with an increase of the impinging velocity V, the concentration ofTBP Corg, and the impinging velocity ratio Vor/Vaq. However, E and kta decrease with an increase of the inner diameter d1 from 1 to 2 mm, the concentration of butyric acid Caq from 0.5% （v/v） to 2% （v/v）. The factor L ranging from 3 to 11 mm has a negligible effect on E and kLa. A correlation on these variables and kLa was proposed based on the experimental data. These results indicated good mass transfer oerformance of CIJR in the extraction operation.
基金The work was financially supported by the National Natural Science Foundation of China(No.21544005)the Basic Research Program(Natural Science Foundation for Young Scholars)of Jiangsu Province(No.BK20170489)+3 种基金the Materials and Chemical Engineering Research Center of Xinjiang Production and Construction Corps(No.2018BTRC003)the Joint Project of Yangzhou City and Higher Education Institutions(No.YZ2019127)the Innovation Incubation Project of Yangzhou University(No.2019CXJ025)the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘An aqueous nanosuspension of agrochemicals unlike pharmaceutics has to achieve massive production in an effective way,capable to ensure sufficient profits in commercialization.This work implements the flash nanoprecipitation(FNP)technique to effectively generate agrochemical nanosuspension,anticipatedly overcoming such an obstacle.Azoxystrobin,a broad spectrum fungicide,in either acetone or ethanol is used herein as a mode agrochemical.To ensure a green and practical utilization,three kinds of commercially available and eco-friendly surfactants,i.e.,poly(ethylene glycol)-block-poly(lactic-co-glycolic acid)(PEG-b-PLGA),Tween 80 and alkyl polyglucosides(APGs),are employed for stabilizing the nanoparticles.The results show that the polymeric stabilizer,PEG-b-PLGA,has the best stabilization efficiency,and can maintain the particles below 100 nm for at least three weeks.The azoxystrobin load of the nanoparticles reaches as high as 77 wt.%,beneficial to enhancing the biological potency.Moreover,the FNP brings the particles a much smaller size,narrower size distribution,better size stability,and higher biological efficacy than the ones made via a traditional method of the drop and stir(DS).The nanosuspensions present superior fungicidal performances over a prevailing counterpart from Syngenta.This study proves an enhanced biological potency and reduced dosage of agrochemical nanosuspension made via the FNP,indicating a remarkable advantage of the FNP over the conventional preparation.The integration of a super-high load,eco-friendly excipients,intensified preparation process,enhanced potency,and reduced dosage creates a promising pathway to generate a green aqueous nanosuspension of agrochemicals.
