Composite solid propellants(CSPs) have widely been used as main energy source for propelling the rockets in both space and military applications. Internal ballistic parameters of rockets like characteristic exhaust ve...Composite solid propellants(CSPs) have widely been used as main energy source for propelling the rockets in both space and military applications. Internal ballistic parameters of rockets like characteristic exhaust velocity, specific impulse, thrust, burning rate etc., are measured to assess and control the performance of rocket motors. The burn rate of solid propellants has been considered as most vital parameter for design of solid rocket motors to meet specific mission requirements. The burning rate of solid propellants can be tailored by using different constituents, extent of oxidizer loading and its particle size and more commonly by incorporating suitable combustion catalysts. Various metal oxides(MOs),complexes, metal powders and metal alloys have shown positive catalytic behaviour during the combustion of CSPs. These are usually solid-state catalysts that play multiple roles in combustion of CSPs such as reduction in activation energy, enhancement of rate of reaction, modification of sequences in reaction-phase, influence on condensed-phase combustion and participation in combustion process in gas-phase reactions. The application of nanoscale catalysts in CSPs has increased considerably in recent past due to their superior catalytic properties as compared to their bulk-sized counterparts. A large surface-to-volume ratio and quantum size effect of nanocatalysts are considered to be plausible reasons for improving the combustion characteristics of propellants. Several efforts have been made to produce nanoscale combustion catalysts for advanced propellant formulations to improve their energetics. The work done so far is largely scattered. In this review, an effort has been made to introduce various combustion catalysts having at least a metallic entity. Recent developments of nanoscale combustion catalysts with their specific merits are discussed. The combustion chemistry of a typical CSP is briefly discussed for providing a better understanding on role of combustion catalysts in burning rate enhancement. 展开更多
Effects of metal (Ni, Cu, Al) and composite metal (NiB, NiCu, NiCuB) nanopowders on the thermal decomposition of ammonium perchlorate (AP) and composite solid propellant ammonium perchlorate/hydroxyterminated polybuta...Effects of metal (Ni, Cu, Al) and composite metal (NiB, NiCu, NiCuB) nanopowders on the thermal decomposition of ammonium perchlorate (AP) and composite solid propellant ammonium perchlorate/hydroxyterminated polybutadiene (AP/HTPB) were studied by thermal analysis (DTA). The results show that metal and composite metal nanopowders all have good catalytic effects on the thermal decomposition of AP and AP/HTPB composite solid propellant. The effects of metal nanopowders on the thermal decomposition of AP are less than those of the composite metal nanopowders. The effects of metal and composite metal nanopowders on the thermal decomposition of AP are different from those on the thermal decomposition of the AP/HTPB composite solid propellant.展开更多
In this paper, a series of Fe- and Co-doped lanthanum（hydr）oxides catalysts were prepared by a simple coprecipitationhydrothermal method. The as-prepared catalysts were characterized with various techniques includin...In this paper, a series of Fe- and Co-doped lanthanum（hydr）oxides catalysts were prepared by a simple coprecipitationhydrothermal method. The as-prepared catalysts were characterized with various techniques including powder X-ray diffraction（XRD）, N2 adsorption/desorption, inductively coupled plasma（ICP） and transmission electron microscopy（TEM）. The Fe-based catalysts exhibited consecutive phase changes of amorphous Fe Ox→FeLaO3→Fe2N under different stages（as-prepared→calcination→ammonia decomposition reaction）; as for Co-based catalysts, the phase transformation followed a sequence of Co（OH）2→Co3O4→metallic Co. It was revealed that Fe2N and metallic Co were most probably the active crystalline phase respectively for Feand Co-based catalysts in the decomposition of ammonia.展开更多
短码扩频长码加扰的直扩信号可视为特殊的长码直扩信号,将其短扩频码和长扰码作为复合码。首先通过特征值分解和酉矩阵去位置模糊实现复合码的盲估计;然后利用m序列的三阶相关函数特性识别短扩频码的类型;最后根据识别结果采用三阶相关...短码扩频长码加扰的直扩信号可视为特殊的长码直扩信号,将其短扩频码和长扰码作为复合码。首先通过特征值分解和酉矩阵去位置模糊实现复合码的盲估计;然后利用m序列的三阶相关函数特性识别短扩频码的类型;最后根据识别结果采用三阶相关法或延迟三阶相关法实现长短伪码的盲估计。仿真表明,复合码估计在信噪比-7.5 d B以上可达到1%以下的误码率;当信噪比高于-6 d B时,三阶相关法估计长短伪码本原多项式的正确率可以达到90%以上;当信噪比高于-4 d B时,延迟三阶相关法估计长短伪码序列的误码率低于1%。展开更多
文摘Composite solid propellants(CSPs) have widely been used as main energy source for propelling the rockets in both space and military applications. Internal ballistic parameters of rockets like characteristic exhaust velocity, specific impulse, thrust, burning rate etc., are measured to assess and control the performance of rocket motors. The burn rate of solid propellants has been considered as most vital parameter for design of solid rocket motors to meet specific mission requirements. The burning rate of solid propellants can be tailored by using different constituents, extent of oxidizer loading and its particle size and more commonly by incorporating suitable combustion catalysts. Various metal oxides(MOs),complexes, metal powders and metal alloys have shown positive catalytic behaviour during the combustion of CSPs. These are usually solid-state catalysts that play multiple roles in combustion of CSPs such as reduction in activation energy, enhancement of rate of reaction, modification of sequences in reaction-phase, influence on condensed-phase combustion and participation in combustion process in gas-phase reactions. The application of nanoscale catalysts in CSPs has increased considerably in recent past due to their superior catalytic properties as compared to their bulk-sized counterparts. A large surface-to-volume ratio and quantum size effect of nanocatalysts are considered to be plausible reasons for improving the combustion characteristics of propellants. Several efforts have been made to produce nanoscale combustion catalysts for advanced propellant formulations to improve their energetics. The work done so far is largely scattered. In this review, an effort has been made to introduce various combustion catalysts having at least a metallic entity. Recent developments of nanoscale combustion catalysts with their specific merits are discussed. The combustion chemistry of a typical CSP is briefly discussed for providing a better understanding on role of combustion catalysts in burning rate enhancement.
文摘Effects of metal (Ni, Cu, Al) and composite metal (NiB, NiCu, NiCuB) nanopowders on the thermal decomposition of ammonium perchlorate (AP) and composite solid propellant ammonium perchlorate/hydroxyterminated polybutadiene (AP/HTPB) were studied by thermal analysis (DTA). The results show that metal and composite metal nanopowders all have good catalytic effects on the thermal decomposition of AP and AP/HTPB composite solid propellant. The effects of metal nanopowders on the thermal decomposition of AP are less than those of the composite metal nanopowders. The effects of metal and composite metal nanopowders on the thermal decomposition of AP are different from those on the thermal decomposition of the AP/HTPB composite solid propellant.
基金Project supported by the National Natural Science Foundation of China(21301107,21501109)Fundamental Research Funding of Shandong University(2014JC005)+1 种基金the Taishan Scholar Project of Shandong Province(China)Doctoral Funding of Ministry of Education of China(20130131120009)
文摘In this paper, a series of Fe- and Co-doped lanthanum（hydr）oxides catalysts were prepared by a simple coprecipitationhydrothermal method. The as-prepared catalysts were characterized with various techniques including powder X-ray diffraction（XRD）, N2 adsorption/desorption, inductively coupled plasma（ICP） and transmission electron microscopy（TEM）. The Fe-based catalysts exhibited consecutive phase changes of amorphous Fe Ox→FeLaO3→Fe2N under different stages（as-prepared→calcination→ammonia decomposition reaction）; as for Co-based catalysts, the phase transformation followed a sequence of Co（OH）2→Co3O4→metallic Co. It was revealed that Fe2N and metallic Co were most probably the active crystalline phase respectively for Feand Co-based catalysts in the decomposition of ammonia.
文摘短码扩频长码加扰的直扩信号可视为特殊的长码直扩信号,将其短扩频码和长扰码作为复合码。首先通过特征值分解和酉矩阵去位置模糊实现复合码的盲估计;然后利用m序列的三阶相关函数特性识别短扩频码的类型;最后根据识别结果采用三阶相关法或延迟三阶相关法实现长短伪码的盲估计。仿真表明,复合码估计在信噪比-7.5 d B以上可达到1%以下的误码率;当信噪比高于-6 d B时,三阶相关法估计长短伪码本原多项式的正确率可以达到90%以上;当信噪比高于-4 d B时,延迟三阶相关法估计长短伪码序列的误码率低于1%。
