A correlation-based digital background calibration algorithm for pipelined Analog-to- Digital Converters (ADCs) is presented in this paper. The merit of the calibration algorithm is that the main errors information, w...A correlation-based digital background calibration algorithm for pipelined Analog-to- Digital Converters (ADCs) is presented in this paper. The merit of the calibration algorithm is that the main errors information, which include the capacitor mismatches and residue amplifier distortion, are extracted integrally. A modified 1st pipelined stage is adopted to solve the signal overflow caused by the Pseudo-random Noise (PN) sequences. Behavioral simulation results verify the effectiveness of the algorithm. It improves the Signal-to-Noise-plus-Distortion Ratio (SNDR) and Spurious-Free-Dynamic-Range (SFDR) of the pipelined ADC from 41.8 dB to 78.3 dB and 55.6 dB to 98.6 dB, respectively, which is comparable to the prior arts.展开更多
This paper presents a 12-bit 100 MS/s CMOS pipelined analog-to-digital converter （ADC） with digital background calibration. A large magnitude calibration signal is injected into the multiplying digital-to-analog con...This paper presents a 12-bit 100 MS/s CMOS pipelined analog-to-digital converter （ADC） with digital background calibration. A large magnitude calibration signal is injected into the multiplying digital-to-analog converter （MDAC） while the architecture of the MDAC remains unchanged. When sampled at 100 MS/s, it takes only 2.8 s to calibrate the 12-bit prototype ADC and achieves a peak spurious-free dynamic range of 85 dB and a peak signal-to-noise plus distortion ratio of 66 dB with 2 MHz input. Integral nonlinearity is improved from 1.9 to 0.6 least significant bits after calibration. The chip is fabricated in a 0.18μm CMOS process, occupies an active area of 2.3 × 1.6 mm^2, and consumes 205 mW at 1.8 V.展开更多
In this paper,detailed models of 14-bit 100 MS/s pipelined analog-to-digital converter( ADC)are presented. In order to help design of ADC system,blocks for pipelined ADC and disturbance sources are carefully analyzed....In this paper,detailed models of 14-bit 100 MS/s pipelined analog-to-digital converter( ADC)are presented. In order to help design of ADC system,blocks for pipelined ADC and disturbance sources are carefully analyzed. Critical parameters,such as capacitor mismatch,clock jitter are proposed and simulated. The pipelined ADC system is divided into five parts,clock generator,sample and hold( S/H) circuit,multiplying digital-to-analog converters( MDAC),backend,and digital correction. These blocks introduce several interferences,which attenuate performance of pipelined ADC severely. Modeling and simulations of these disturbance sources are presented particularly. A new model of S/H is introduced. Results derived from simulations can supervise design and optimization of the ADC system.展开更多
A new technique which is named charge temporary storage technique (CTST) was presented to improve the linearity of a 1.5 bit/s pipelined analog-to-digital converter (ADC). The residual voltage was obtained from the sa...A new technique which is named charge temporary storage technique (CTST) was presented to improve the linearity of a 1.5 bit/s pipelined analog-to-digital converter (ADC). The residual voltage was obtained from the sampling capacitor, and the other capacitor was just a temporary storage of charge. Then, the linearity produced by the mismatch of these capacitors was eliminated without adding extra capacitor error-averaging amplifiers. The simulation results confirmed the high linearity and low dissipation of pipelined ADCs implemented in CTST, so CTST was a new method to implement high resolution, small size ADCs.展开更多
基金Supported by the Doctoral Program Foundation of Institutions of Higher Education of China (No.20120111120008)State Key Lab of ASIC & System(Fudan University) (No. 11KF001)Special Fund for Doctoral Program (Hefei University of Technology) (No.2011HGBZ0953)
文摘A correlation-based digital background calibration algorithm for pipelined Analog-to- Digital Converters (ADCs) is presented in this paper. The merit of the calibration algorithm is that the main errors information, which include the capacitor mismatches and residue amplifier distortion, are extracted integrally. A modified 1st pipelined stage is adopted to solve the signal overflow caused by the Pseudo-random Noise (PN) sequences. Behavioral simulation results verify the effectiveness of the algorithm. It improves the Signal-to-Noise-plus-Distortion Ratio (SNDR) and Spurious-Free-Dynamic-Range (SFDR) of the pipelined ADC from 41.8 dB to 78.3 dB and 55.6 dB to 98.6 dB, respectively, which is comparable to the prior arts.
文摘This paper presents a 12-bit 100 MS/s CMOS pipelined analog-to-digital converter （ADC） with digital background calibration. A large magnitude calibration signal is injected into the multiplying digital-to-analog converter （MDAC） while the architecture of the MDAC remains unchanged. When sampled at 100 MS/s, it takes only 2.8 s to calibrate the 12-bit prototype ADC and achieves a peak spurious-free dynamic range of 85 dB and a peak signal-to-noise plus distortion ratio of 66 dB with 2 MHz input. Integral nonlinearity is improved from 1.9 to 0.6 least significant bits after calibration. The chip is fabricated in a 0.18μm CMOS process, occupies an active area of 2.3 × 1.6 mm^2, and consumes 205 mW at 1.8 V.
基金Supported by the National Basic Research Program of China(No.2010CB327404)
文摘In this paper,detailed models of 14-bit 100 MS/s pipelined analog-to-digital converter( ADC)are presented. In order to help design of ADC system,blocks for pipelined ADC and disturbance sources are carefully analyzed. Critical parameters,such as capacitor mismatch,clock jitter are proposed and simulated. The pipelined ADC system is divided into five parts,clock generator,sample and hold( S/H) circuit,multiplying digital-to-analog converters( MDAC),backend,and digital correction. These blocks introduce several interferences,which attenuate performance of pipelined ADC severely. Modeling and simulations of these disturbance sources are presented particularly. A new model of S/H is introduced. Results derived from simulations can supervise design and optimization of the ADC system.
基金The National Science Fund for Creative Re-search Groups( Grant No 60521002 )Shanghai Natural Science Foundation (GrantNo 037062022)
文摘A new technique which is named charge temporary storage technique (CTST) was presented to improve the linearity of a 1.5 bit/s pipelined analog-to-digital converter (ADC). The residual voltage was obtained from the sampling capacitor, and the other capacitor was just a temporary storage of charge. Then, the linearity produced by the mismatch of these capacitors was eliminated without adding extra capacitor error-averaging amplifiers. The simulation results confirmed the high linearity and low dissipation of pipelined ADCs implemented in CTST, so CTST was a new method to implement high resolution, small size ADCs.
