Pharmaceuticals and personal care products(PPCPs)are a unique group of emerging environmental contaminants,due to their inherent ability to induce physiological effects in human at low doses.An increasing number of st...Pharmaceuticals and personal care products(PPCPs)are a unique group of emerging environmental contaminants,due to their inherent ability to induce physiological effects in human at low doses.An increasing number of studies has confirmed the presence of various PPCPs in different environmental compartments,which raises concerns about the potential adverse effects to humans and wildlife.Therefore,this article reviews the current state-of-knowledge on PPCPs in the freshwater aquatic environment.The environmental risk posed by these contaminants is evaluated in light of the persistence,bioaccumulation and toxicity criteria.Available literature on the sources,transport and degradation of PPCPs in the aquatic environment are evaluated,followed by a comprehensive review of the reported concentrations of different PPCP groups in the freshwater aquatic environment(water,sediment and biota)of the five continents.Finally,future perspectives for research on PPCPs in the freshwater aquatic environment are discussed in light of the identified research gaps in current knowledge.展开更多
This paper presents an advanced and integrated research approach to longwall mining-induced strata move- ment, stress changes, fractures, and gas flow dynamics with actual examples of its application from recent studi...This paper presents an advanced and integrated research approach to longwall mining-induced strata move- ment, stress changes, fractures, and gas flow dynamics with actual examples of its application from recent studies for coextraction of coal and methane development at Huainan Mining Group in China, in a deep and multi-seam mining environment. The advanced approach takes advantage of the latest techniques in Australia for mine scale geotechnical characterisation, field measurement, monitoring and numerical modelling. Key techniques described in this paper include coal mine site 3D geotechnical characterisation methods, surface deep downhole multi-point extensometers and piezometers for overburden displacement and pore pressure measurements during mining, tracer gas tests for goal gas flow patterns, and advanced numerical modelling codes for coupled coal mine strata, water and gas simulations, and longwall goaf gas ttow investigations. This integrated approach has resulted in significant insights into the complex dynamic imeraction between strata, groundwater, and gas during mining at Huainan Mining Group in recent years. Based on the lindings from the extensive field monitoring and numerical modelling studies, a three-dimensional annular-shaped over-lying zone along the perimeter of the longwall panel was identified for optimal methane drainage during mining.展开更多
The compressive behaviour of paper honeycombs is studied by means of an experimental analysis. Experiment results show how geometry aspects of hexagonal paper honeycombs, e.g. the height of paper honeycomb, the thickn...The compressive behaviour of paper honeycombs is studied by means of an experimental analysis. Experiment results show how geometry aspects of hexagonal paper honeycombs, e.g. the height of paper honeycomb, the thickness and length of honeycomb cell-wall, the drawing ratio of hexagonal honeycomb, affect the compressive properties of the paper honeycombs. It is in good agreement with the theory model. The constraint factor K of the critical buckling stress is mainly determined by the length of honeycomb cell-wail. It can be described as K=1.54 for B type paper honeycombs and K=3.32 for D type paper honeycombs. The plateau stress is the power exponent function of the thickness to length ratio of honeycomb cell-wall, and the experiment results show that the constant is 13.2 and the power exponent is 1.77. The research results can be used to characterize and improve efficiently the compressive properties of paper honeycombs.展开更多
Irregular grains, high interfacial stresses and anisotropic properties widely exist in 3D-printed metallic materials, and this paper investigated the effects of heat treatment on the microstructural, mechanical and co...Irregular grains, high interfacial stresses and anisotropic properties widely exist in 3D-printed metallic materials, and this paper investigated the effects of heat treatment on the microstructural, mechanical and corrosion properties of 316 L stainless steel fabricated by selective laser melting. Sub-grains and low-angle boundaries exist in the as-received selective laser melted(SLMed) 316 L stainless steel. After heat treatment at 1050℃, the sub-grains and low-angle boundaries changed slightly, and the stress state and strength decreased to some extent due to the decrease of dislocation density. After heat treatment at 1200℃, the grains became uniform, and the dislocation cells vanished, which led to a sharp decline in the hardness and strength. However, the ductility was improved after recrystallization heat treatment.The passive film thickness and corrosion potential of the SLMed 316 L stainless steel decreased after heat treatment, and the pitting potential also decreased due to the accelerated transition from metastable to steady-state pitting;this accelerated transition was caused by the presence of weak passive films at the enlarged pores after heat treatment, especially for an adequate solid solution treatment.展开更多
文摘Pharmaceuticals and personal care products(PPCPs)are a unique group of emerging environmental contaminants,due to their inherent ability to induce physiological effects in human at low doses.An increasing number of studies has confirmed the presence of various PPCPs in different environmental compartments,which raises concerns about the potential adverse effects to humans and wildlife.Therefore,this article reviews the current state-of-knowledge on PPCPs in the freshwater aquatic environment.The environmental risk posed by these contaminants is evaluated in light of the persistence,bioaccumulation and toxicity criteria.Available literature on the sources,transport and degradation of PPCPs in the aquatic environment are evaluated,followed by a comprehensive review of the reported concentrations of different PPCP groups in the freshwater aquatic environment(water,sediment and biota)of the five continents.Finally,future perspectives for research on PPCPs in the freshwater aquatic environment are discussed in light of the identified research gaps in current knowledge.
文摘This paper presents an advanced and integrated research approach to longwall mining-induced strata move- ment, stress changes, fractures, and gas flow dynamics with actual examples of its application from recent studies for coextraction of coal and methane development at Huainan Mining Group in China, in a deep and multi-seam mining environment. The advanced approach takes advantage of the latest techniques in Australia for mine scale geotechnical characterisation, field measurement, monitoring and numerical modelling. Key techniques described in this paper include coal mine site 3D geotechnical characterisation methods, surface deep downhole multi-point extensometers and piezometers for overburden displacement and pore pressure measurements during mining, tracer gas tests for goal gas flow patterns, and advanced numerical modelling codes for coupled coal mine strata, water and gas simulations, and longwall goaf gas ttow investigations. This integrated approach has resulted in significant insights into the complex dynamic imeraction between strata, groundwater, and gas during mining at Huainan Mining Group in recent years. Based on the lindings from the extensive field monitoring and numerical modelling studies, a three-dimensional annular-shaped over-lying zone along the perimeter of the longwall panel was identified for optimal methane drainage during mining.
基金This project is supported by Guangdong Provincial Key Laboratory Foundation of Higher Education Institutions, China.
文摘The compressive behaviour of paper honeycombs is studied by means of an experimental analysis. Experiment results show how geometry aspects of hexagonal paper honeycombs, e.g. the height of paper honeycomb, the thickness and length of honeycomb cell-wall, the drawing ratio of hexagonal honeycomb, affect the compressive properties of the paper honeycombs. It is in good agreement with the theory model. The constraint factor K of the critical buckling stress is mainly determined by the length of honeycomb cell-wail. It can be described as K=1.54 for B type paper honeycombs and K=3.32 for D type paper honeycombs. The plateau stress is the power exponent function of the thickness to length ratio of honeycomb cell-wall, and the experiment results show that the constant is 13.2 and the power exponent is 1.77. The research results can be used to characterize and improve efficiently the compressive properties of paper honeycombs.
基金supported financially by the National Key Research and Development Program of China (No. 2017YFB 0702300)the National Natural Science Foundation of China (No. 51671029)the Fundamental Research Funds for the Central Universities (No. FRF-TP-17-002B)
文摘Irregular grains, high interfacial stresses and anisotropic properties widely exist in 3D-printed metallic materials, and this paper investigated the effects of heat treatment on the microstructural, mechanical and corrosion properties of 316 L stainless steel fabricated by selective laser melting. Sub-grains and low-angle boundaries exist in the as-received selective laser melted(SLMed) 316 L stainless steel. After heat treatment at 1050℃, the sub-grains and low-angle boundaries changed slightly, and the stress state and strength decreased to some extent due to the decrease of dislocation density. After heat treatment at 1200℃, the grains became uniform, and the dislocation cells vanished, which led to a sharp decline in the hardness and strength. However, the ductility was improved after recrystallization heat treatment.The passive film thickness and corrosion potential of the SLMed 316 L stainless steel decreased after heat treatment, and the pitting potential also decreased due to the accelerated transition from metastable to steady-state pitting;this accelerated transition was caused by the presence of weak passive films at the enlarged pores after heat treatment, especially for an adequate solid solution treatment.
