We present an analysis of electromagnetic oscillations in a spherical conducting cavity filled concentrically with either dielectric or vacuum layers. The fields are given analytically, and the resonant frequency is d...We present an analysis of electromagnetic oscillations in a spherical conducting cavity filled concentrically with either dielectric or vacuum layers. The fields are given analytically, and the resonant frequency is determined numerically. An important special case of a spherical conducting cavity with a smaller dielectric sphere at its center is treated in more detail. By numerically integrating the equations of motion we demonstrate that the transverse electric oscillations in such cavity can be used to accelerate strongly relativistic electrons. The electron’s trajectory is assumed to be nearly tangential to the dielectric sphere. We demonstrate that the interaction of such electrons with the oscillating magnetic field deflects their trajectory from a straight line only slightly. The Q factor of such a resonator only depends on losses in the dielectric. For existing ultra low loss dielectrics, Q can be three orders of magnitude better than obtained in existing cylindrical cavities.展开更多
The Superconducting Radio Frequency （SRF） system of the upgrade project of the Beijing Electron Positron Collider （BEPCII） has been in operation for almost 8 years. During operation, many problems have been encoun...The Superconducting Radio Frequency （SRF） system of the upgrade project of the Beijing Electron Positron Collider （BEPCII） has been in operation for almost 8 years. During operation, many problems have been encountered, such as excessive heating of the power couplers, frequent beam trips during high intensity colliding, false arc interlock trigger and so on. Among them, some has been solved successfully, some have been alleviated. This paper will describe some experiences with BEPCII SRF system operation, including the symptoms, causes and solutions of problems.展开更多
The design of a 450 MHz β=0.2 superconducting single spoke cavity has been finished at Peking University. A theoretical model and a numerical simulation are used to study the relationship between the RF performance a...The design of a 450 MHz β=0.2 superconducting single spoke cavity has been finished at Peking University. A theoretical model and a numerical simulation are used to study the relationship between the RF performance and the geometric parameters of the cavity. In this paper, the optimization of the spoke cavity is described in detail. The RF simulation gives the optimum parameters Epk/Zacc of 2.65 and Bpk/Eacc of 5.22 mT/（MV/m）. The mechanical properties of the cavity are also studied. Two stiff ribs are used to offer a credible mechanical stability.展开更多
A 30 mA drift tube linac （DTL） accelerator has been designed using SUPERFISH code in the energy range of 3-55 MeV in the framework of the Turkish Accelerator Center （TAC） project. Optimization criteria in cavity d...A 30 mA drift tube linac （DTL） accelerator has been designed using SUPERFISH code in the energy range of 3-55 MeV in the framework of the Turkish Accelerator Center （TAC） project. Optimization criteria in cavity design are effective shunt impedance （ZTT）, transit-time factor and electrical breakdown limit. In geometrical optimization we have aimed to increase the energy gain in each RF gap of the DTL cells by maximizing the effective shunt impedance （ZTT） and the transit-time factor. Beam dynamics studies of the DTL accelerator have been performed using beam dynamics simulation codes of PATH and PARMILA. The results of both codes have been compared. In the beam dynamical studies, the rms values of beam emittance have been taken into account and a low emittance growth in both x and y directions has been attempted.展开更多
Background Superconducting cavity is usually needed to be gradually cooled from room temperature to the superconducting temperature zone(4.2 K and below)in the testing and sophisticated operation process of supercondu...Background Superconducting cavity is usually needed to be gradually cooled from room temperature to the superconducting temperature zone(4.2 K and below)in the testing and sophisticated operation process of superconducting cavity.Purpose The purpose of this paper is to study the cooling law on the helium cooldown process for the 650 MHz two-cell superconducting cavity with the unsteady numerical simulation.Method A three-dimensional coupled heat-flow model of 650 MHz two-cell superconducting cavity was established.The unsteady numerical simulation of different inlet temperatures,flow rates and pressure conditions was carried out.The equiva-lent convective heat transfer coefficient and temperature distribution of 650 MHz two-cell superconducting cavity during cooldown process were obtained.The effects of cooling time and entrance parameters on the cooldown process were analyzed.Results The temperature distribution of the lower intersection lines has a large drop in the initial stage of cooldown process(120 s),while the temperature near the flanges at the both ends is still higher(remaining at the initial temperature of 300 K).With the passage of time,the temperature of the upper and lower intersection lines decreases.The maximum temperature difference on the lower intersections is within 2 K in the final stage of cooldown process(3600 s).The maximum temperature difference increases by 180%,and the difference between the maximum temperature and the minimum temperature(dT)at the end of a cooldown stage increases by 130%after 1 h,respectively,when the inlet temperature drops from 290 to 270 K(under the condition of the initial temperature of 300 K).Conclusions The maximum temperature difference and the dT at the end of a cooldown stage increase with the decrease in the inlet temperature.The maximum temperature difference increases with the increase in the inlet flow rate,while the dT at the end of a cooldown stage decreases with the increase in the inlet flow rate.The effect of changing the inlet flow rate on the coo展开更多
文摘We present an analysis of electromagnetic oscillations in a spherical conducting cavity filled concentrically with either dielectric or vacuum layers. The fields are given analytically, and the resonant frequency is determined numerically. An important special case of a spherical conducting cavity with a smaller dielectric sphere at its center is treated in more detail. By numerically integrating the equations of motion we demonstrate that the transverse electric oscillations in such cavity can be used to accelerate strongly relativistic electrons. The electron’s trajectory is assumed to be nearly tangential to the dielectric sphere. We demonstrate that the interaction of such electrons with the oscillating magnetic field deflects their trajectory from a straight line only slightly. The Q factor of such a resonator only depends on losses in the dielectric. For existing ultra low loss dielectrics, Q can be three orders of magnitude better than obtained in existing cylindrical cavities.
文摘The Superconducting Radio Frequency （SRF） system of the upgrade project of the Beijing Electron Positron Collider （BEPCII） has been in operation for almost 8 years. During operation, many problems have been encountered, such as excessive heating of the power couplers, frequent beam trips during high intensity colliding, false arc interlock trigger and so on. Among them, some has been solved successfully, some have been alleviated. This paper will describe some experiences with BEPCII SRF system operation, including the symptoms, causes and solutions of problems.
文摘The design of a 450 MHz β=0.2 superconducting single spoke cavity has been finished at Peking University. A theoretical model and a numerical simulation are used to study the relationship between the RF performance and the geometric parameters of the cavity. In this paper, the optimization of the spoke cavity is described in detail. The RF simulation gives the optimum parameters Epk/Zacc of 2.65 and Bpk/Eacc of 5.22 mT/（MV/m）. The mechanical properties of the cavity are also studied. Two stiff ribs are used to offer a credible mechanical stability.
基金Supported by Turkish State Planning Organization (DPT) (DPT-2006K120470)
文摘A 30 mA drift tube linac （DTL） accelerator has been designed using SUPERFISH code in the energy range of 3-55 MeV in the framework of the Turkish Accelerator Center （TAC） project. Optimization criteria in cavity design are effective shunt impedance （ZTT）, transit-time factor and electrical breakdown limit. In geometrical optimization we have aimed to increase the energy gain in each RF gap of the DTL cells by maximizing the effective shunt impedance （ZTT） and the transit-time factor. Beam dynamics studies of the DTL accelerator have been performed using beam dynamics simulation codes of PATH and PARMILA. The results of both codes have been compared. In the beam dynamical studies, the rms values of beam emittance have been taken into account and a low emittance growth in both x and y directions has been attempted.
文摘Background Superconducting cavity is usually needed to be gradually cooled from room temperature to the superconducting temperature zone(4.2 K and below)in the testing and sophisticated operation process of superconducting cavity.Purpose The purpose of this paper is to study the cooling law on the helium cooldown process for the 650 MHz two-cell superconducting cavity with the unsteady numerical simulation.Method A three-dimensional coupled heat-flow model of 650 MHz two-cell superconducting cavity was established.The unsteady numerical simulation of different inlet temperatures,flow rates and pressure conditions was carried out.The equiva-lent convective heat transfer coefficient and temperature distribution of 650 MHz two-cell superconducting cavity during cooldown process were obtained.The effects of cooling time and entrance parameters on the cooldown process were analyzed.Results The temperature distribution of the lower intersection lines has a large drop in the initial stage of cooldown process(120 s),while the temperature near the flanges at the both ends is still higher(remaining at the initial temperature of 300 K).With the passage of time,the temperature of the upper and lower intersection lines decreases.The maximum temperature difference on the lower intersections is within 2 K in the final stage of cooldown process(3600 s).The maximum temperature difference increases by 180%,and the difference between the maximum temperature and the minimum temperature(dT)at the end of a cooldown stage increases by 130%after 1 h,respectively,when the inlet temperature drops from 290 to 270 K(under the condition of the initial temperature of 300 K).Conclusions The maximum temperature difference and the dT at the end of a cooldown stage increase with the decrease in the inlet temperature.The maximum temperature difference increases with the increase in the inlet flow rate,while the dT at the end of a cooldown stage decreases with the increase in the inlet flow rate.The effect of changing the inlet flow rate on the coo
