The primary pattern of the late Cenozoic to the present tectonic deformation of China is characterized by relative movements and interactions of tectonic blocks. Active tectonic blocks are geological units that have b...The primary pattern of the late Cenozoic to the present tectonic deformation of China is characterized by relative movements and interactions of tectonic blocks. Active tectonic blocks are geological units that have been separated from each other by active tectonic zones. Boundaries between blocks are the highest gradient of differential movement. Most of tectonic activity occurs on boundaries of the blocks. Earthquakes are results of abrupt releases of accumulated strain energy that reaches the threshold of strength of the earth's crust. Boundaries of tectonic blocks are the locations of most discontinuous deformation and highest gradient of stress accumulation, thus are the most likely places for strain energy accumulation and releases, and in turn, devastating earthquakes. Almost all earthquakes of magnitude greater than 8 and 80%-90% of earthquakes of magnitude over 7 occur along boundaries of active tectonic blocks. This fact indicates that differential movements and interactions of active tectonic blocks are the primary mechanism for the occurrences of devastating earthquakes.展开更多
Based on the concept of "active blocks" and spatial distribution of historical earthquakes with surface ruptures as well as major and subordinate active faults. The Sichuan-Yunnan region can be divided into ...Based on the concept of "active blocks" and spatial distribution of historical earthquakes with surface ruptures as well as major and subordinate active faults. The Sichuan-Yunnan region can be divided into four first-order blocks. They are the Markam block (I), the Sichuan-Yunnan rhombic block (II), Baoshan-Pu'er block (III), and Mizhina-Ximeng block (IV). Cut by sub-ordinate NE-trending active faults, the Sichuan-Yunnan rhombic block (II) can be further divided into two sub-blocks: the northwestern Sichuan sub-block (II1) and the middle Yunnan sub-block (II2), while the Baoshan- Pu'er block (III) can be further divided into three sub-blocks: Baoshan sub-block (III1), Jinggu sub-block (III2), and Mengla sub-block (III3). A quantitative study of offset landforms is carried out and the basic types of active faults and their long-term slip rates along the major boundaries of active blocks of different orders in the Sichuan-Yunnan region are determined, through slip vector analysis, the motion states of the active blocks are clarified and the deformation coordination on the block margins is discussed. It is suggested that the tectonic motion of the blocks in this region is a complex or superimposition of three basic types of motions: southeastward sliding, rotating on vertical axis, and uplifting. The Markam block (I), the northwestern Sichuan sub-block (II1), and middle Yunnan sub-block (II2) have a southeastward horizontal sliding rate of 1-5 mm/a, clockwise rotating angular rate of 1.4-4(/Ma, and uplifting rate of about 1 mm/a. The Baoshan-Pu'er (III) and Mizhina-Ximeng (IV) blocks have also been extensively clockwise rotated. This pattern of motion is a strain response to the collision between the Indian and Eurasian plates and the localized deformation and differential slip on the block margins associated with the northward motion of the Indian Plate. Because a set of transverse thrusts between the blocks absorbs and transforms some components of eastward or southeastward sliding motion, the eastward escape or 展开更多
The ca. 126e120 Ma Au deposits of the Jiaodong Peninsula, eastern China, define the country＇s largest gold province with an overall endowment estimated as＆gt;3000 t Au. The vein and disseminated ores are hosted by N...The ca. 126e120 Ma Au deposits of the Jiaodong Peninsula, eastern China, define the country＇s largest gold province with an overall endowment estimated as＆gt;3000 t Au. The vein and disseminated ores are hosted by NE-to NNE-trending brittle normal faults that parallel the margins of ca. 165e150 Ma, deeply emplaced, lower crustal melt granites. The deposits are sited along the faults for many tens of kilometers and the larger orebodies are associated with dilatational jogs. Country rocks to the granites are Pre-cambrian high-grade metamorphic rocks located on both sides of a Triassic suture between the North and South China blocks. During early Mesozoic convergent deformation, the ore-hosting structures developed as ductile thrust faults that were subsequently reactivated during Early Cretaceous ＂Yan-shanian＂intracontinental extensional deformation and associated gold formation. 〈br〉 Classification of the gold deposits remains problematic. Many features resemble those typical of orogenic Au including the linear structural distribution of the deposits, mineralization style, ore and alteration assemblages, and ore fluid chemistry. However, Phanerozoic orogenic Au deposits are formed by prograde metamorphism of accreted oceanic rocks in Cordilleran-style orogens. The Jiaodong de-posits, in contrast, formed within two Precambrian blocks approximately 2 billion years after devolati-lization of the country rocks, and thus require a model that involves alternative fluid and metal sources for the ores. A widespread suite of ca. 130e123 Ma granodiorites overlaps temporally with the ores, but shows a poor spatial association with the deposits. Furthermore, the deposit distribution and mineral-ization style is atypical of ores formed from nearby magmas. The ore concentration requires fluid focusing during some type of sub-crustal thermal event, which could be broadly related to a combination of coeval lithospheric thinning, asthenospheric upwelling, paleo-Pacific plate subduction, and seismicity along the contine展开更多
The South China Block was formed through the collisional orogeny between the Cathaysia Block and the Yangtze Block in the Early Neoproterozoic.The northern,western and southern sides of the South China Block were affe...The South China Block was formed through the collisional orogeny between the Cathaysia Block and the Yangtze Block in the Early Neoproterozoic.The northern,western and southern sides of the South China Block were affected by disappearance of the Paleo-Tethyan Ocean during the Paleozoic.The southern and northern sides of the South China Block were respectively collided with the Indo-China Block and North China Block in the latest Paleozoic to form the basic framework of the Eastern China.The Eastern China has been affected by the westward subduction of the Pacific Plate since the Mesozoic.Therefore,the South China Block was influenced by the three major tectonic systems,leading to a superposed compound tectonics.The comparative study of the Mesozoic geology between the South China Block and its surrounding areas suggests that although the Mesozoic South China Block was adjacent to the subduction zone of the western Pacific,no juvenile arc-type crust has been found in the eastern margin.The main Mesozoic geology in South China is characterized by reworking of ancient continental margins to intracontinental tectonics,lacking oceanic arc basalts and continental arc andesites.Therefore,a key to understanding of the Mesozoic geology in South China is to determine the temporal-spatial distribution and tectonic evolution of Mesozoic magmatic rocks in this region.This paper presents a review on the tectonic evolution of the South China Block through summarizing the magmatic rock records from the compressional to extensional tectonic process with the transition at the three juncture zones and using the deformation and geophysic data from the deep part of the South China continental lithosphere.Our attempt is to promote the study of South China’s geology and to make it as a typical target for development of plate tectonic theory.展开更多
A novel integrated guidance and autopilot design method is proposed for homing missiles based on the adaptive block dynamic surface control approach. The fully integrated guidance and autopilot model is established by...A novel integrated guidance and autopilot design method is proposed for homing missiles based on the adaptive block dynamic surface control approach. The fully integrated guidance and autopilot model is established by combining the nonlinear missile dynamics with the nonlinear dynamics describing the pursuit situation of a missile and a target in the three-dimensional space. The integrated guidance and autopilot design problem is further converted to a state regulation problem of a time-varying nonlinear system with matched and unmatched uncertainties. A new and simple adaptive block dynamic surface control algorithm is proposed to address such a state regulation problem. The stability of the closed-loop system is proven based on the Lyapunov theory. The six degrees of freedom （6DOF） nonlinear numerical simulation results show that the proposed integrated guidance and autopilot algorithm can ensure the accuracy of target interception and the robust stability of the closed-loop system with respect to the uncertainties in the missile dynamics.展开更多
Re-measured GPS data have recently revealed that a broad NE trending dextral shear zone exists in the eastern Bayan Har block about 200 km northwest of the Longmenshan thrust on the eastern margin of the Qinghai-Tibet...Re-measured GPS data have recently revealed that a broad NE trending dextral shear zone exists in the eastern Bayan Har block about 200 km northwest of the Longmenshan thrust on the eastern margin of the Qinghai-Tibet Plateau. The strain rate along this shear zone may reach up to 4-6 mm/a. Our interpretation of satellite images and field observations indicate that this dextral shear zone corresponds to a newly generated NE trending Longriba fault zone that has been ignored before. The northeast segment of the Longriba fault zone consists of two subparallel N54°±5°E trending branch faults about 30 km apart, and late Quaternary offset landforms are well developed along the strands of these two branch faults. The northern branch fault, the Longriqu fault, has relatively large reverse component, while the southern branch fault, the Maoergai fault, is a pure right-lateral strike slip fault. According to vector synthesizing principle, the average right-lateral strike slip rate along the Longriba fault zone in the late Quaternary is calculated to be 5.4±2.0 mm/a, the vertical slip rate to be 0.7 mm/a, and the rate of crustal shortening to be 0.55 mm/a. The discovery of the Longriba fault zone may provide a new insight into the tectonics and dynamics of the eastern margin of the Qinghai-Tibet Plateau. Taken the Longriba fault zone as a boundary, the Bayan Har block is divided into two sub-blocks: the Ahba sub-block in the west and the Longmenshan sub-block in the east. The shortening and uplifting of the Longmenshan sub-block as a whole reflects that both the Longmenshan thrust and Longriba fault zone are subordinated to a back propagated nappe tectonic system that was formed during the southeastward motion of the Bayan Har block owing to intense resistance of the South China block. This nappe tectonic system has become a boundary tectonic type of an active block supporting crustal deformation along the eastern margin of the Qinghai-Tibet Plateau from late Cenozoic till now. The Longriba fault zone is just an active 展开更多
We apply ambient noise tomography to significant seismic data resources in a region including the northeastern Tibetan plateau, the Ordos block and the Sichuan basin. The seismic data come from about 160 stations of t...We apply ambient noise tomography to significant seismic data resources in a region including the northeastern Tibetan plateau, the Ordos block and the Sichuan basin. The seismic data come from about 160 stations of the provincial broadband digital seismograph networks of China. Ambient noise cross-correlations are performed on the data recorded between 2007 and 2009 and high quality inter-station Rayleigh phase velocity dispersion curves are obtained between periods of 6 s to 35 s. Resulting Rayleigh wave phase velocity maps possess a lateral resolution between 100 km and 200 kin. The phase velocities at short periods （〈20 s） are lower in the Sichuan basin, the northwest segment of the Ordos block and the Weihe graben, and outline sedimentary deposits. At intermediate and long periods （〉25 s）, strong high velocity anomalies are observed within the Ordos block and the Sichuan basin and low phase velocities are imaged in the northeastern Tibetan plateau, reflecting the variation of crustal thickness from the Tibetan plateau to the neighboring regions in the east. Crustal and uppermost mantle shear wave velocities vary strongly between the Tibetan plateau, the Sichuan basin and the Ordos block. The Ordos block and the Sichuan basin are dominated by high shear wave velocities in the crust and uppermost mantle. There is a triangle-shaped low velocity zone located in the northeastern Tibetan plateau, whose width narrows towards the eastern margin of the plateau. No low velocity zone is apparent beneath the Qinling orogen, suggesting that mass may not be able to flow eastward through the boundary between the Ordos block and the Sichuan basin in the crust and uppermost mantle.展开更多
文摘The primary pattern of the late Cenozoic to the present tectonic deformation of China is characterized by relative movements and interactions of tectonic blocks. Active tectonic blocks are geological units that have been separated from each other by active tectonic zones. Boundaries between blocks are the highest gradient of differential movement. Most of tectonic activity occurs on boundaries of the blocks. Earthquakes are results of abrupt releases of accumulated strain energy that reaches the threshold of strength of the earth's crust. Boundaries of tectonic blocks are the locations of most discontinuous deformation and highest gradient of stress accumulation, thus are the most likely places for strain energy accumulation and releases, and in turn, devastating earthquakes. Almost all earthquakes of magnitude greater than 8 and 80%-90% of earthquakes of magnitude over 7 occur along boundaries of active tectonic blocks. This fact indicates that differential movements and interactions of active tectonic blocks are the primary mechanism for the occurrences of devastating earthquakes.
文摘Based on the concept of "active blocks" and spatial distribution of historical earthquakes with surface ruptures as well as major and subordinate active faults. The Sichuan-Yunnan region can be divided into four first-order blocks. They are the Markam block (I), the Sichuan-Yunnan rhombic block (II), Baoshan-Pu'er block (III), and Mizhina-Ximeng block (IV). Cut by sub-ordinate NE-trending active faults, the Sichuan-Yunnan rhombic block (II) can be further divided into two sub-blocks: the northwestern Sichuan sub-block (II1) and the middle Yunnan sub-block (II2), while the Baoshan- Pu'er block (III) can be further divided into three sub-blocks: Baoshan sub-block (III1), Jinggu sub-block (III2), and Mengla sub-block (III3). A quantitative study of offset landforms is carried out and the basic types of active faults and their long-term slip rates along the major boundaries of active blocks of different orders in the Sichuan-Yunnan region are determined, through slip vector analysis, the motion states of the active blocks are clarified and the deformation coordination on the block margins is discussed. It is suggested that the tectonic motion of the blocks in this region is a complex or superimposition of three basic types of motions: southeastward sliding, rotating on vertical axis, and uplifting. The Markam block (I), the northwestern Sichuan sub-block (II1), and middle Yunnan sub-block (II2) have a southeastward horizontal sliding rate of 1-5 mm/a, clockwise rotating angular rate of 1.4-4(/Ma, and uplifting rate of about 1 mm/a. The Baoshan-Pu'er (III) and Mizhina-Ximeng (IV) blocks have also been extensively clockwise rotated. This pattern of motion is a strain response to the collision between the Indian and Eurasian plates and the localized deformation and differential slip on the block margins associated with the northward motion of the Indian Plate. Because a set of transverse thrusts between the blocks absorbs and transforms some components of eastward or southeastward sliding motion, the eastward escape or
文摘The ca. 126e120 Ma Au deposits of the Jiaodong Peninsula, eastern China, define the country＇s largest gold province with an overall endowment estimated as＆gt;3000 t Au. The vein and disseminated ores are hosted by NE-to NNE-trending brittle normal faults that parallel the margins of ca. 165e150 Ma, deeply emplaced, lower crustal melt granites. The deposits are sited along the faults for many tens of kilometers and the larger orebodies are associated with dilatational jogs. Country rocks to the granites are Pre-cambrian high-grade metamorphic rocks located on both sides of a Triassic suture between the North and South China blocks. During early Mesozoic convergent deformation, the ore-hosting structures developed as ductile thrust faults that were subsequently reactivated during Early Cretaceous ＂Yan-shanian＂intracontinental extensional deformation and associated gold formation. 〈br〉 Classification of the gold deposits remains problematic. Many features resemble those typical of orogenic Au including the linear structural distribution of the deposits, mineralization style, ore and alteration assemblages, and ore fluid chemistry. However, Phanerozoic orogenic Au deposits are formed by prograde metamorphism of accreted oceanic rocks in Cordilleran-style orogens. The Jiaodong de-posits, in contrast, formed within two Precambrian blocks approximately 2 billion years after devolati-lization of the country rocks, and thus require a model that involves alternative fluid and metal sources for the ores. A widespread suite of ca. 130e123 Ma granodiorites overlaps temporally with the ores, but shows a poor spatial association with the deposits. Furthermore, the deposit distribution and mineral-ization style is atypical of ores formed from nearby magmas. The ore concentration requires fluid focusing during some type of sub-crustal thermal event, which could be broadly related to a combination of coeval lithospheric thinning, asthenospheric upwelling, paleo-Pacific plate subduction, and seismicity along the contine
基金financially supported by the China Geology Survey(Grant Nos.1212011121098,1212010611805,12010911012,1212011120120)International Cooperation Program for Chinese Science and Technology(Grant No.2011DFA22460)Department of Science and Technology of Zhejiang Province of China(Grant No.2014C33023)
文摘The South China Block was formed through the collisional orogeny between the Cathaysia Block and the Yangtze Block in the Early Neoproterozoic.The northern,western and southern sides of the South China Block were affected by disappearance of the Paleo-Tethyan Ocean during the Paleozoic.The southern and northern sides of the South China Block were respectively collided with the Indo-China Block and North China Block in the latest Paleozoic to form the basic framework of the Eastern China.The Eastern China has been affected by the westward subduction of the Pacific Plate since the Mesozoic.Therefore,the South China Block was influenced by the three major tectonic systems,leading to a superposed compound tectonics.The comparative study of the Mesozoic geology between the South China Block and its surrounding areas suggests that although the Mesozoic South China Block was adjacent to the subduction zone of the western Pacific,no juvenile arc-type crust has been found in the eastern margin.The main Mesozoic geology in South China is characterized by reworking of ancient continental margins to intracontinental tectonics,lacking oceanic arc basalts and continental arc andesites.Therefore,a key to understanding of the Mesozoic geology in South China is to determine the temporal-spatial distribution and tectonic evolution of Mesozoic magmatic rocks in this region.This paper presents a review on the tectonic evolution of the South China Block through summarizing the magmatic rock records from the compressional to extensional tectonic process with the transition at the three juncture zones and using the deformation and geophysic data from the deep part of the South China continental lithosphere.Our attempt is to promote the study of South China’s geology and to make it as a typical target for development of plate tectonic theory.
基金the Fundamental Research Funds for the Central Universities(No.HIT.NSRIF.2013039)the National Natural Science Foundation of China(Nos.61203125 and 61021002)
文摘A novel integrated guidance and autopilot design method is proposed for homing missiles based on the adaptive block dynamic surface control approach. The fully integrated guidance and autopilot model is established by combining the nonlinear missile dynamics with the nonlinear dynamics describing the pursuit situation of a missile and a target in the three-dimensional space. The integrated guidance and autopilot design problem is further converted to a state regulation problem of a time-varying nonlinear system with matched and unmatched uncertainties. A new and simple adaptive block dynamic surface control algorithm is proposed to address such a state regulation problem. The stability of the closed-loop system is proven based on the Lyapunov theory. The six degrees of freedom （6DOF） nonlinear numerical simulation results show that the proposed integrated guidance and autopilot algorithm can ensure the accuracy of target interception and the robust stability of the closed-loop system with respect to the uncertainties in the missile dynamics.
基金the National Basic Research Program of China (Grant No. 2004CB418401)the National Natural Science Foundation of China (Grant No. 40474037)
文摘Re-measured GPS data have recently revealed that a broad NE trending dextral shear zone exists in the eastern Bayan Har block about 200 km northwest of the Longmenshan thrust on the eastern margin of the Qinghai-Tibet Plateau. The strain rate along this shear zone may reach up to 4-6 mm/a. Our interpretation of satellite images and field observations indicate that this dextral shear zone corresponds to a newly generated NE trending Longriba fault zone that has been ignored before. The northeast segment of the Longriba fault zone consists of two subparallel N54°±5°E trending branch faults about 30 km apart, and late Quaternary offset landforms are well developed along the strands of these two branch faults. The northern branch fault, the Longriqu fault, has relatively large reverse component, while the southern branch fault, the Maoergai fault, is a pure right-lateral strike slip fault. According to vector synthesizing principle, the average right-lateral strike slip rate along the Longriba fault zone in the late Quaternary is calculated to be 5.4±2.0 mm/a, the vertical slip rate to be 0.7 mm/a, and the rate of crustal shortening to be 0.55 mm/a. The discovery of the Longriba fault zone may provide a new insight into the tectonics and dynamics of the eastern margin of the Qinghai-Tibet Plateau. Taken the Longriba fault zone as a boundary, the Bayan Har block is divided into two sub-blocks: the Ahba sub-block in the west and the Longmenshan sub-block in the east. The shortening and uplifting of the Longmenshan sub-block as a whole reflects that both the Longmenshan thrust and Longriba fault zone are subordinated to a back propagated nappe tectonic system that was formed during the southeastward motion of the Bayan Har block owing to intense resistance of the South China block. This nappe tectonic system has become a boundary tectonic type of an active block supporting crustal deformation along the eastern margin of the Qinghai-Tibet Plateau from late Cenozoic till now. The Longriba fault zone is just an active
基金supported by Chinese Academy of Sciences grant kzcx2-yw-142 and Y009021002National Natural Science Foundation of China under grant No. 40974034+1 种基金NSF-EAR award 0944022NSF-OISE 0730154 at the University of Colorado at Boulder
文摘We apply ambient noise tomography to significant seismic data resources in a region including the northeastern Tibetan plateau, the Ordos block and the Sichuan basin. The seismic data come from about 160 stations of the provincial broadband digital seismograph networks of China. Ambient noise cross-correlations are performed on the data recorded between 2007 and 2009 and high quality inter-station Rayleigh phase velocity dispersion curves are obtained between periods of 6 s to 35 s. Resulting Rayleigh wave phase velocity maps possess a lateral resolution between 100 km and 200 kin. The phase velocities at short periods （〈20 s） are lower in the Sichuan basin, the northwest segment of the Ordos block and the Weihe graben, and outline sedimentary deposits. At intermediate and long periods （〉25 s）, strong high velocity anomalies are observed within the Ordos block and the Sichuan basin and low phase velocities are imaged in the northeastern Tibetan plateau, reflecting the variation of crustal thickness from the Tibetan plateau to the neighboring regions in the east. Crustal and uppermost mantle shear wave velocities vary strongly between the Tibetan plateau, the Sichuan basin and the Ordos block. The Ordos block and the Sichuan basin are dominated by high shear wave velocities in the crust and uppermost mantle. There is a triangle-shaped low velocity zone located in the northeastern Tibetan plateau, whose width narrows towards the eastern margin of the plateau. No low velocity zone is apparent beneath the Qinling orogen, suggesting that mass may not be able to flow eastward through the boundary between the Ordos block and the Sichuan basin in the crust and uppermost mantle.
