In this study,to address the low efficiency for conventional ultrasonic-assisted drlling(UAD)of carbon fiber-reinforced plastic and titanium alloy(CFRP/Ti)stacks,feasibility experiments of non-separation UAD,in which ...In this study,to address the low efficiency for conventional ultrasonic-assisted drlling(UAD)of carbon fiber-reinforced plastic and titanium alloy(CFRP/Ti)stacks,feasibility experiments of non-separation UAD,in which continuous cutting between the tool and the workpiece occurs at a high feed rate,are carried out.The experimental results indicate that,compared to conventional separation UAD,the non-separation UAD effectively reduces the cutting forces by 24.2%and 1.9%for CFRP stage and 22.1%and 2.6%for the Ti stage at the feed rates of 50 and 70μm/r,respectively.Furthermore,the non-separation UAD significantly improves hole quality,including higher hole diameter accuracy,lower hole surface roughness,and less hole damage.In addition,the non-separation UAD can decrease adhesive tool wear.This study demonstrates that,compared to conventional drilling(CD),the non-separation UAD can effectively improve drilling quality and tool life while maintaining high efficiency.展开更多
The DD6 nickel-based superalloy exhibits remarkably high temperature properties;therefore,it is employed as a crucial structural material in the aviation industry.Nevertheless,this material is difficult to process.Ult...The DD6 nickel-based superalloy exhibits remarkably high temperature properties;therefore,it is employed as a crucial structural material in the aviation industry.Nevertheless,this material is difficult to process.Ultrasonic-assisted drilling(UAD)combines the characteristics of vibration processing technology and conventional drilling technology,significantly improving the machinability of difficult-to-machine materials.Thus,UAD experiments were performed on micro-hole machining of DD6 superalloy in this study.The effects of amplitude,frequency,spindle speed,and feed rate on thrust force,machining quality,and drill bit wear were studied;thereafter,a comparison was drawn between these effects and those of conventional drilling(CD).The experimental results reveal that the thrust force decreases with an increase in spindle speed or a decrease in feed rate for both UAD and CD.UAD can significantly reduce the thrust force.With the same processing parameters,the greater the amplitude,the greater the reduction of the thrust force.The surface roughness of the hole wall produced by UAD is lower than that of CD.Compared with CD,UAD reduces the burr height,improves machining accuracy,and reduces drill bit wear.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52375399 and 91960203)the Aeronautical Science Foundation of China(No.2022Z045051001).
文摘In this study,to address the low efficiency for conventional ultrasonic-assisted drlling(UAD)of carbon fiber-reinforced plastic and titanium alloy(CFRP/Ti)stacks,feasibility experiments of non-separation UAD,in which continuous cutting between the tool and the workpiece occurs at a high feed rate,are carried out.The experimental results indicate that,compared to conventional separation UAD,the non-separation UAD effectively reduces the cutting forces by 24.2%and 1.9%for CFRP stage and 22.1%and 2.6%for the Ti stage at the feed rates of 50 and 70μm/r,respectively.Furthermore,the non-separation UAD significantly improves hole quality,including higher hole diameter accuracy,lower hole surface roughness,and less hole damage.In addition,the non-separation UAD can decrease adhesive tool wear.This study demonstrates that,compared to conventional drilling(CD),the non-separation UAD can effectively improve drilling quality and tool life while maintaining high efficiency.
基金This study was supported by the National Scholastic Athletics Foundation(NSAF)(Grant No.U1830122)the National Natural Science Foundation of China(Grant No.51775443).
文摘The DD6 nickel-based superalloy exhibits remarkably high temperature properties;therefore,it is employed as a crucial structural material in the aviation industry.Nevertheless,this material is difficult to process.Ultrasonic-assisted drilling(UAD)combines the characteristics of vibration processing technology and conventional drilling technology,significantly improving the machinability of difficult-to-machine materials.Thus,UAD experiments were performed on micro-hole machining of DD6 superalloy in this study.The effects of amplitude,frequency,spindle speed,and feed rate on thrust force,machining quality,and drill bit wear were studied;thereafter,a comparison was drawn between these effects and those of conventional drilling(CD).The experimental results reveal that the thrust force decreases with an increase in spindle speed or a decrease in feed rate for both UAD and CD.UAD can significantly reduce the thrust force.With the same processing parameters,the greater the amplitude,the greater the reduction of the thrust force.The surface roughness of the hole wall produced by UAD is lower than that of CD.Compared with CD,UAD reduces the burr height,improves machining accuracy,and reduces drill bit wear.
