The microstructures and mechanics properties of TiC-based cermets composed of TiC, WC, Ni, Co, Mo, and Cr3C2 were investigated. The results show that Mo has a great effect on the sintering densification, microstructur...The microstructures and mechanics properties of TiC-based cermets composed of TiC, WC, Ni, Co, Mo, and Cr3C2 were investigated. The results show that Mo has a great effect on the sintering densification, microstructures, and mechanical properties. The microstructures and distribution of Mo and Ti in the TiC-based cermets were analyzed. It was indicated that a new phase with Ti, Mo, W, and C was formed on the rim of （Ti,W）C grains by means of an addition of Mo into the TiC-based cermets. The new phase with a surrounding structure was of great aid to improve the wettability of the liquid phase on the solid phase surface of TiC, decrease the porosity and refine the grains of the hard phase, which gave rise to the increase in strength and hardness. The properties of the TiC-based cermets could be further improved to some extent by adding WC, Cr2C3, and Co.展开更多
Steel reinforced TiC composites are an attractive choice for wear resistance and corrosion resistance applications. TiC- reinforced 17-4PH maraging stainless matrix composites were processed by conventional powder met...Steel reinforced TiC composites are an attractive choice for wear resistance and corrosion resistance applications. TiC- reinforced 17-4PH maraging stainless matrix composites were processed by conventional powder metallurgy （P/M）. TiC-reinforced maraging stainless steel composites with 〉97% of theoretical density were fabricated. The microstructure, mechanical and wear properties of the composites were evaluated. The microstructure of these composites consisted of spherical and semi-spherical TiC particles. A few microcracks appeared in the composites, showing the presence of tensile stress in the composites produced during sintering. Typical properties, namely, hardness and bend strength were reported for the sintered composites. After heat treatment and aging, the increase of hardness was observed. The increase of hardness was attributed to the aging reaction in the 17-4PH stainless steel. The precipitates appeared in the microstructure and were responsible for the increase in hardness. The specific wear behavior of the composites was strongly dependent on the content of TiC particles, the interparticle spacing, and the presence of hard precipitates in the binder phase.展开更多
The effect of rare earth (RE) oxide on the microstructure and properties of TiC based cermet/Cu alloy composite hardfacing materials was investigated by using scanning electron microscope (SEM), transmission electron...The effect of rare earth (RE) oxide on the microstructure and properties of TiC based cermet/Cu alloy composite hardfacing materials was investigated by using scanning electron microscope (SEM), transmission electron microscope (TEM), impact test and wear test. The mechanism of RE oxide for improving the phase structure and the impact toughness was also discussed. The experimental results indicate that the microstructure of the matrix can be refined, and the micro-porous defects can be eliminated by adding RE oxide into the composite materials. The polycrystalline and amorphous phase structure is formed at the interface of cermet and matrix metal. The formed structure enhances the conjoint strength of interface. The frictional wear resistance can be improved obviously, although the microhardness of the matrix metal can not be effectively increased by adding RE oxide.展开更多
文摘The microstructures and mechanics properties of TiC-based cermets composed of TiC, WC, Ni, Co, Mo, and Cr3C2 were investigated. The results show that Mo has a great effect on the sintering densification, microstructures, and mechanical properties. The microstructures and distribution of Mo and Ti in the TiC-based cermets were analyzed. It was indicated that a new phase with Ti, Mo, W, and C was formed on the rim of （Ti,W）C grains by means of an addition of Mo into the TiC-based cermets. The new phase with a surrounding structure was of great aid to improve the wettability of the liquid phase on the solid phase surface of TiC, decrease the porosity and refine the grains of the hard phase, which gave rise to the increase in strength and hardness. The properties of the TiC-based cermets could be further improved to some extent by adding WC, Cr2C3, and Co.
文摘Steel reinforced TiC composites are an attractive choice for wear resistance and corrosion resistance applications. TiC- reinforced 17-4PH maraging stainless matrix composites were processed by conventional powder metallurgy （P/M）. TiC-reinforced maraging stainless steel composites with 〉97% of theoretical density were fabricated. The microstructure, mechanical and wear properties of the composites were evaluated. The microstructure of these composites consisted of spherical and semi-spherical TiC particles. A few microcracks appeared in the composites, showing the presence of tensile stress in the composites produced during sintering. Typical properties, namely, hardness and bend strength were reported for the sintered composites. After heat treatment and aging, the increase of hardness was observed. The increase of hardness was attributed to the aging reaction in the 17-4PH stainless steel. The precipitates appeared in the microstructure and were responsible for the increase in hardness. The specific wear behavior of the composites was strongly dependent on the content of TiC particles, the interparticle spacing, and the presence of hard precipitates in the binder phase.
文摘The effect of rare earth (RE) oxide on the microstructure and properties of TiC based cermet/Cu alloy composite hardfacing materials was investigated by using scanning electron microscope (SEM), transmission electron microscope (TEM), impact test and wear test. The mechanism of RE oxide for improving the phase structure and the impact toughness was also discussed. The experimental results indicate that the microstructure of the matrix can be refined, and the micro-porous defects can be eliminated by adding RE oxide into the composite materials. The polycrystalline and amorphous phase structure is formed at the interface of cermet and matrix metal. The formed structure enhances the conjoint strength of interface. The frictional wear resistance can be improved obviously, although the microhardness of the matrix metal can not be effectively increased by adding RE oxide.
