Slag carry-over during the draining of molten steel from a teeming ladle is numerically studied here. Two-phase isothermal transient 3D Computational Fluid Dynamics simulations were employed to simulate the draining p...Slag carry-over during the draining of molten steel from a teeming ladle is numerically studied here. Two-phase isothermal transient 3D Computational Fluid Dynamics simulations were employed to simulate the draining process. Two nozzle diameters, two nozzle positions and three slag heights were considered. From mass balances, the slag carry-over in terms of mass flow rate was obtained for each of the above variables. Besides, the draining times of the teeming ladle were estimated from theoretical considerations and CDF simulations, and compared.展开更多
At the late stage of continuous casting（CC）ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mech...At the late stage of continuous casting（CC）ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mechanical modeling method for ladle teeming was proposed.Firstly,a dynamic model for vortex suction process was built,and the profiles of vortex flow field were acquired.Then,based on the level set method（LSM）,a two-phase 3Dinterface coupling model for slag entrapment was built.Finally,in combination with high-order essentially non-oscillatory（ENO）and total variation diminishing（TVD）methods,a LSM-based numerical solution method was proposed to obtain the 3Dcoupling evolution regularities in vortex suction process.Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity;there is a pressure oscillation phenomenon at the vortex penetration state,which is caused by the energy shock of two-phase vortex penetration coupling.展开更多
文摘Slag carry-over during the draining of molten steel from a teeming ladle is numerically studied here. Two-phase isothermal transient 3D Computational Fluid Dynamics simulations were employed to simulate the draining process. Two nozzle diameters, two nozzle positions and three slag heights were considered. From mass balances, the slag carry-over in terms of mass flow rate was obtained for each of the above variables. Besides, the draining times of the teeming ladle were estimated from theoretical considerations and CDF simulations, and compared.
基金supported by NSFC-Zhejiang Joint Fund for the Integration of Industrialization and Informatization(U1509212)National Natural Science Foundation of China(51375446)Zhejiang Provincial Natural Science Foundation for Distinguished Young Scientists(LR16E050001)
文摘At the late stage of continuous casting（CC）ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mechanical modeling method for ladle teeming was proposed.Firstly,a dynamic model for vortex suction process was built,and the profiles of vortex flow field were acquired.Then,based on the level set method（LSM）,a two-phase 3Dinterface coupling model for slag entrapment was built.Finally,in combination with high-order essentially non-oscillatory（ENO）and total variation diminishing（TVD）methods,a LSM-based numerical solution method was proposed to obtain the 3Dcoupling evolution regularities in vortex suction process.Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity;there is a pressure oscillation phenomenon at the vortex penetration state,which is caused by the energy shock of two-phase vortex penetration coupling.
