期刊文献+

Two-phase sink vortex suction mechanism and penetration dynamic characteristics in ladle teeming process 被引量:8

Two-phase sink vortex suction mechanism and penetration dynamic characteristics in ladle teeming process
原文传递
导出
摘要 At the late stage of continuous casting(CC)ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mechanical modeling method for ladle teeming was proposed.Firstly,a dynamic model for vortex suction process was built,and the profiles of vortex flow field were acquired.Then,based on the level set method(LSM),a two-phase 3Dinterface coupling model for slag entrapment was built.Finally,in combination with high-order essentially non-oscillatory(ENO)and total variation diminishing(TVD)methods,a LSM-based numerical solution method was proposed to obtain the 3Dcoupling evolution regularities in vortex suction process.Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity;there is a pressure oscillation phenomenon at the vortex penetration state,which is caused by the energy shock of two-phase vortex penetration coupling. At the late stage of continuous casting(CC)ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mechanical modeling method for ladle teeming was proposed.Firstly,a dynamic model for vortex suction process was built,and the profiles of vortex flow field were acquired.Then,based on the level set method(LSM),a two-phase 3Dinterface coupling model for slag entrapment was built.Finally,in combination with high-order essentially non-oscillatory(ENO)and total variation diminishing(TVD)methods,a LSM-based numerical solution method was proposed to obtain the 3Dcoupling evolution regularities in vortex suction process.Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity;there is a pressure oscillation phenomenon at the vortex penetration state,which is caused by the energy shock of two-phase vortex penetration coupling.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2017年第7期669-677,共9页
基金 supported by NSFC-Zhejiang Joint Fund for the Integration of Industrialization and Informatization(U1509212) National Natural Science Foundation of China(51375446) Zhejiang Provincial Natural Science Foundation for Distinguished Young Scientists(LR16E050001)
关键词 Ladle teeming Sink vortex Suction mechanism Two-phase coupling Level set method Pressure oscillation Ladle teeming Sink vortex Suction mechanism Two-phase coupling Level set method Pressure oscillation
  • 相关文献

同被引文献89

引证文献8

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部