The effectiveness of a superabsorbent polymer of sodium polyacrylate was studied, with emphasis on water management, i.e., absorption, retention and desorption in the soil. The polymer was applied in plots with a sand...The effectiveness of a superabsorbent polymer of sodium polyacrylate was studied, with emphasis on water management, i.e., absorption, retention and desorption in the soil. The polymer was applied in plots with a sandy soil near Grandola (southern Portugal). Characterization of the most relevant physical and chemical properties of the polymer was made, namely, its specific gravity, particle diameter, capacity of water absorption and desorption. In the plots with and without the polymer, soil moisture was continuously monitored, and grassland biomass samples were collected and weighed. The results reflected the effective role of the polymer both in the improvement of the water regime in the soil and in the substantial increment of grassland productivity.展开更多
In this paper, the addition of admixed superabsorbent polymer (SAP) improved the microstructure and durability-related properties in a cement-based system with supplementary materials. This is an important issue in re...In this paper, the addition of admixed superabsorbent polymer (SAP) improved the microstructure and durability-related properties in a cement-based system with supplementary materials. This is an important issue in real construction projects when good durability properties are required. This study investigates the effect of SAP on the systems using cement replacement by fly ash and silica fume considering the strength properties and durability properties of paste under sulfate attack of cement-based system. The replacement considered in the study was of 10% silica fume and 20% fly ash in each case, the dosage of SAP was 0.25% of the total amount of cementitious material. The results showed that the addition of SAP in the cement-based system improved the compressive strength and reduced expansion to sulfate attack. Scanning electron micrographs showed that utilization of fly ash with silica fume and silica fume with SAP resulted in a much denser microstructure, thereby, leading to an increase in compressive strength and lower expansion under sulfate attack.展开更多
The internal curing effect of superabsorbent polymer(SAP) on the properties of high performance concrete(HPC) under marine wetting and drying cycles(WD cycles) was investigated. Compressive strength, hydration and chl...The internal curing effect of superabsorbent polymer(SAP) on the properties of high performance concrete(HPC) under marine wetting and drying cycles(WD cycles) was investigated. Compressive strength, hydration and chloride migration were experimentally investigated and the results were evaluated by compasison with those under fresh water curing(FW). Water absorption and porosity were also evaluated only under WD cycles. The results showed the important influence of wetting and drying cycles on the properties of SAP modified HPC properties. Carefully designed, SAP minimized the long-term compressive strength of HPC under marine WD cycles. The hydration rate was faster in the initial curing, but became lower as compared with that cured in FW. In addition, SAP improved the long-term water absorption resistance and chloride migration resistance of HPC under marine WD cycles. The examination of the porosity showed a lower increase of the volume of capillary pores in SAP modified HPC under long term WD cycles compared with that without SAP. Therefore, internal curing by SAP could improve the durability properties of HPC under marine WD cycles.展开更多
One of the ways of overcoming the cost of irrigation is through in-situ water harvesting at the plant roots. Super absorbent polymer (SAP) can facilitate water harvesting at the plant roots. This study attempted to as...One of the ways of overcoming the cost of irrigation is through in-situ water harvesting at the plant roots. Super absorbent polymer (SAP) can facilitate water harvesting at the plant roots. This study attempted to assess the effect of SAP on plant available water (PAW) of different soils. In this study, SAP was sequentially added at the rate of 0.2%, 0.3% and 0.5% of the soil weight and its impact assessed in clay, sandy clay and sandy loam soils. The moisture retention characteristics of the original and SAP treated soils were studied using soil water retention curves (SWRC) and results modelled using Gardner model. PAW was estimated from SWRC as the difference between moisture content at 1.5 and 3 bar in all soils. The difference in PAW between original and treated soils was assessed at 5% level of significance. The WRC of all the samples was adequately found to be described by the Gardner model (Coefficient of determination R<sup>2</sup> ≥ 98% and residual standard error (RSE) ≤ 0.04). SWRC changed with increase in SAP percentage in clay, sandy clay and sandy loam soils. Clay had a higher change in water retention then sandy clay and lastly sandy loam. Plant available water content (PAW) in all soils increased. In clay soil it increased with increase in SAP from 0.3291 at zero SAP to 0.6223 at 0.5% SAP. Sandy clay soil increased in PAW from 0.2721 at zero SAP to 0.5335 at 0.5% SAP and Sandy loam soils from 0.1691 at zero SAP to 0.3461 at 0.5% SAP. Hence, from the study SAP can be used to conserve irrigation water in the plant roots and therefore reducing the cost since PAW has been increased.展开更多
文摘The effectiveness of a superabsorbent polymer of sodium polyacrylate was studied, with emphasis on water management, i.e., absorption, retention and desorption in the soil. The polymer was applied in plots with a sandy soil near Grandola (southern Portugal). Characterization of the most relevant physical and chemical properties of the polymer was made, namely, its specific gravity, particle diameter, capacity of water absorption and desorption. In the plots with and without the polymer, soil moisture was continuously monitored, and grassland biomass samples were collected and weighed. The results reflected the effective role of the polymer both in the improvement of the water regime in the soil and in the substantial increment of grassland productivity.
文摘In this paper, the addition of admixed superabsorbent polymer (SAP) improved the microstructure and durability-related properties in a cement-based system with supplementary materials. This is an important issue in real construction projects when good durability properties are required. This study investigates the effect of SAP on the systems using cement replacement by fly ash and silica fume considering the strength properties and durability properties of paste under sulfate attack of cement-based system. The replacement considered in the study was of 10% silica fume and 20% fly ash in each case, the dosage of SAP was 0.25% of the total amount of cementitious material. The results showed that the addition of SAP in the cement-based system improved the compressive strength and reduced expansion to sulfate attack. Scanning electron micrographs showed that utilization of fly ash with silica fume and silica fume with SAP resulted in a much denser microstructure, thereby, leading to an increase in compressive strength and lower expansion under sulfate attack.
基金Funded by National Key Research and Development Program of China(No.2017YFB0310000)Opening Project of State Key Laboratory of Green Building Materials(No.YA-584)the Key Technology Innovation Program from the Ministry of Science and Technology(Hubei Province)(No.2018AAA004)
文摘The internal curing effect of superabsorbent polymer(SAP) on the properties of high performance concrete(HPC) under marine wetting and drying cycles(WD cycles) was investigated. Compressive strength, hydration and chloride migration were experimentally investigated and the results were evaluated by compasison with those under fresh water curing(FW). Water absorption and porosity were also evaluated only under WD cycles. The results showed the important influence of wetting and drying cycles on the properties of SAP modified HPC properties. Carefully designed, SAP minimized the long-term compressive strength of HPC under marine WD cycles. The hydration rate was faster in the initial curing, but became lower as compared with that cured in FW. In addition, SAP improved the long-term water absorption resistance and chloride migration resistance of HPC under marine WD cycles. The examination of the porosity showed a lower increase of the volume of capillary pores in SAP modified HPC under long term WD cycles compared with that without SAP. Therefore, internal curing by SAP could improve the durability properties of HPC under marine WD cycles.
文摘One of the ways of overcoming the cost of irrigation is through in-situ water harvesting at the plant roots. Super absorbent polymer (SAP) can facilitate water harvesting at the plant roots. This study attempted to assess the effect of SAP on plant available water (PAW) of different soils. In this study, SAP was sequentially added at the rate of 0.2%, 0.3% and 0.5% of the soil weight and its impact assessed in clay, sandy clay and sandy loam soils. The moisture retention characteristics of the original and SAP treated soils were studied using soil water retention curves (SWRC) and results modelled using Gardner model. PAW was estimated from SWRC as the difference between moisture content at 1.5 and 3 bar in all soils. The difference in PAW between original and treated soils was assessed at 5% level of significance. The WRC of all the samples was adequately found to be described by the Gardner model (Coefficient of determination R<sup>2</sup> ≥ 98% and residual standard error (RSE) ≤ 0.04). SWRC changed with increase in SAP percentage in clay, sandy clay and sandy loam soils. Clay had a higher change in water retention then sandy clay and lastly sandy loam. Plant available water content (PAW) in all soils increased. In clay soil it increased with increase in SAP from 0.3291 at zero SAP to 0.6223 at 0.5% SAP. Sandy clay soil increased in PAW from 0.2721 at zero SAP to 0.5335 at 0.5% SAP and Sandy loam soils from 0.1691 at zero SAP to 0.3461 at 0.5% SAP. Hence, from the study SAP can be used to conserve irrigation water in the plant roots and therefore reducing the cost since PAW has been increased.
