A series of simulating experimental studies on the rheological behavior and its influential factors of aluminum alloy in continuous roll-casting process have been explored in this paper with a Gleeble-1500 Thermal-Mec...A series of simulating experimental studies on the rheological behavior and its influential factors of aluminum alloy in continuous roll-casting process have been explored in this paper with a Gleeble-1500 Thermal-Mechanical Simulation Tester and a set of special clamp system. Relevant rheological rules in the process of coupling transient solidification and continuous deformation of roll-casting conditions are obtained. Experimental results indicate that four different characteristic stages exist in the whole rheological process, and relative constitutive models suitable for the given conditions of continuous roll casting process have been established through multivariable linear regression analysis of the experimental data.展开更多
The influences of a 0.2 T static magnetic field on the microstructure of 7075 aluminum alloys sheets produced with a twin-roll continuous caster at 675℃ were investigated in this paper. Under a uniform magnetic field...The influences of a 0.2 T static magnetic field on the microstructure of 7075 aluminum alloys sheets produced with a twin-roll continuous caster at 675℃ were investigated in this paper. Under a uniform magnetic field, the primary dendrites were refined and tended to be equiaxed. The microstructure consisted of an intermediate case between dendritic and equiaxed grains. Moreover, the use of an external static field in the twin-roll casting process can reduce heat discharge, resulting in a decrease in undercooling, and may also account for the abatement of segregation bands. In addition, the static magnetic field effectively improved the solute mixing capacity, and the added atoms more easily diffused from precipitates to theα-Al matrix, which resulted in an increase in the mechanical properties of the rolled sheets. Specimens prepared both in the presence of a static magnetic field and in the absence of a static magnetic field exhibited brittle-fracture characteristics.展开更多
基金supported by the National High Technical Reasearch and Development Programme of China(No.19990604906).
文摘A series of simulating experimental studies on the rheological behavior and its influential factors of aluminum alloy in continuous roll-casting process have been explored in this paper with a Gleeble-1500 Thermal-Mechanical Simulation Tester and a set of special clamp system. Relevant rheological rules in the process of coupling transient solidification and continuous deformation of roll-casting conditions are obtained. Experimental results indicate that four different characteristic stages exist in the whole rheological process, and relative constitutive models suitable for the given conditions of continuous roll casting process have been established through multivariable linear regression analysis of the experimental data.
基金This project(No.2010B090400067) was financially supported by the Foshan Science and Technology Bureauthe Education Department of Guangdong Province, China
文摘The influences of a 0.2 T static magnetic field on the microstructure of 7075 aluminum alloys sheets produced with a twin-roll continuous caster at 675℃ were investigated in this paper. Under a uniform magnetic field, the primary dendrites were refined and tended to be equiaxed. The microstructure consisted of an intermediate case between dendritic and equiaxed grains. Moreover, the use of an external static field in the twin-roll casting process can reduce heat discharge, resulting in a decrease in undercooling, and may also account for the abatement of segregation bands. In addition, the static magnetic field effectively improved the solute mixing capacity, and the added atoms more easily diffused from precipitates to theα-Al matrix, which resulted in an increase in the mechanical properties of the rolled sheets. Specimens prepared both in the presence of a static magnetic field and in the absence of a static magnetic field exhibited brittle-fracture characteristics.
