The deep fissured rock mass is affected by coupled effects of initial ground stress and external dynamic disturbance.In order to study the effect of internal flaw on pre-stressed rock mechanical responses and failure ...The deep fissured rock mass is affected by coupled effects of initial ground stress and external dynamic disturbance.In order to study the effect of internal flaw on pre-stressed rock mechanical responses and failure behavior under impact loading,intact granite specimens and specimens with different flaw inclinations are tested by a modified split Hopkinson pressure bar(SHPB)and digital image correlation(DIC)method.The results show that peak strain and dynamic strength of intact specimens and specimens with different flaw angles(α)decrease with the increase of axial static pressure.The 90°flaw has weak reduction effect on peak strain,dynamic strength and combined strength,while 45°and 0°flaws have remarkable reduction effect.Specimens with 90°flaw are suffered combined shear and tensile failure under middle and low axial static pre-stresses,and suffered shear failure under high axial static pre-stresses.Specimens with 45°and 0°flaws are suffered oblique shear failure caused by pre-existing flaw under different axial static pre-stresses.Besides,based on digital image correlation method,it is found that micro-cracks before formation of macro fractures(include shear and tensile fractures)belong to tensile cracks.Tensile and shear strain localizations at pre-existing flaw tip for specimen with 45°and 0°flaws are produced much earlier than that at other positions.展开更多
An iterative and full-coupled rotor/fuselage aerodynamic interaction analytical method is developed based upon the rotor free-wake model and the 3-D fuselage panel model. A close vortex/ surface interaction model usin...An iterative and full-coupled rotor/fuselage aerodynamic interaction analytical method is developed based upon the rotor free-wake model and the 3-D fuselage panel model. A close vortex/ surface interaction model using the Analytical/Numerical Matching (ANM) was adopted in the method in order to simulate effectively the unsteady close interaction between the rotor tip-vortex and fuselage surface. By the analytical method, the unsteady and steady pressure distribution on the fuselage surface, and the unsteady lift and pitching moment of the fuselage in a rotor interaction environment were calculated for different advance ratios. It is shown that the unsteady aerodynamic loads of the fuselage due to the rotor interaction have the same periodic characteristics as the rotor. The comparisons between the present close vortex/surface interaction model and a previous model, which simply excludes vortex filaments inside the fuselage, were also made and the advantages of the former over the latter were demonstrated in improving unsteady close interaction calculations.展开更多
Water entry problems represent complex multiphase flows involving air,water,and structure interaction,occurring rapidly in rough seas,and potentially effecting structural integrity of floating structures.This paper ex...Water entry problems represent complex multiphase flows involving air,water,and structure interaction,occurring rapidly in rough seas,and potentially effecting structural integrity of floating structures.This paper experimentally investigates asymmetric slamming loads acting on a 3-D elastic wedge section.The specimen,featuring two different bottom plates(stiffened and unstiffened),each 4 mm thick,aims to assess the effect of structural stiffness on dynamic loads.The experiments are conducted at different drop heights of 25 cm and 50 cm and varying heel angles from 5°to 25°.The paper describes the experimental conditions,including wedge geometry,material properties,and the test plan.The study explores the influence of heel angle on impact acceleration,revealing an increase in peak acceleration with a higher inclination angle,particularly in the vertical direction.Additionally,the hydrodynamic pressure resulting from asymmetric slamming is presented.The pressure results analyzed and compared at different locations along the length of the wedge.The experimental findings indicate that,despite the leeward side(stiffened)experiencing a smaller hydrodynamic load,the heel angle significantly affects pressure results on the windward side(unstiffened),leading to a more pronounced dynamic response.The time history of pressure results emphasizes the effect of elastic vibrations,particularly noticeable on the unstiffened bottom plate.This study contributes to a deeper understanding of asymmetric slamming on aluminum structures,facilitating the enhancement of mathematical models and the validation of numerical simulations.展开更多
Gable roofs with overhangs （eaves） are the common constructions of low-rise buildings on the southeastern coast of China, and they were vulnerable to typhoons from experience. The wind pressure distributions on gabl...Gable roofs with overhangs （eaves） are the common constructions of low-rise buildings on the southeastern coast of China, and they were vulnerable to typhoons from experience. The wind pressure distributions on gable roofs of low-rise buildings are investigated by a series of wind tunnel tests which consist of 99 test cases with various roof pitches, height-depth ratios and width-depth ratios. The block pressure coefficients and worst negative （block） pressure coefficients on different roof regions of low-rise buildings are proposed for the main structure and building envelope, respectively. The effects of roof pitch, height-depth ratio, and width-depth ratio on the pressure coefficients of each region are analyzed in detail. In addition, the pressure coefficients on the roofs for the main structure and building envelope are fitted according to roof pitch, height-depth ratio and width-depth ratio of the low-rise building. Meanwhile, the rationality of the fitting formulas is verified by comparing the fitting results with the codes of different countries. Lastly, the block pressure coefficients and worst negative pressure coefficients are recommended to guide the design of low-rise buildings in typhoon area and act as references for the future＇s modification of wind load codes.展开更多
Reconstituted specimens are prepared by means of vacuum preloading. Both static and cyclic triaxial tests are carried out, with the specimens consolidated under different principal stress ratios. A finite element meth...Reconstituted specimens are prepared by means of vacuum preloading. Both static and cyclic triaxial tests are carried out, with the specimens consolidated under different principal stress ratios. A finite element method is put forward for calculating the cumulative deformation of soft clay under cyclic loading.展开更多
This paper presents in-situ seismic performance tests of a bridge before its demolition due to accumulated scouring problem. The tests were conducted on three single columns and one caisson-type foundation. The three ...This paper presents in-situ seismic performance tests of a bridge before its demolition due to accumulated scouring problem. The tests were conducted on three single columns and one caisson-type foundation. The three single columns were 1.8 m in diameter,reinforced by 30-D32 longitudinal reinforcements and laterally hooped by D16 reinforcements with spacing of 20 cm. The column height is 9.54 m,10.59 m and 10.37 m for Column P2,P3,and P4,respectively. Column P2 had no exposed foundation and was subjected to pseudo-dynamic tests with peak ground acceleration of 0.32 g first,followed by one cyclic loading test. Column P3 was the benchmark specimen with exposed length of 1.2 m on its foundation. The exposed length for Column P4 was excavated to 4 m,approximately 1/3 of the foundation length,to study the effect of the scouring problem to the column performance. Both Column P3 and Column P4 were subjected to cyclic loading tests. Based on the test results,due to the large dimension of the caisson foundation and the well graded gravel soil type that provided large lateral resistance,the seismic performance among the three columns had only minor differences. Lateral push tests were also conducted on the caisson foundation at Column P5. The caisson was 12 m long and had circular cross-sections whose diameters were 5 m in the upper portion and 4 m in the lower portion. An analytical model to simulate the test results was developed in the OpenSees platform. The analytical model comprised nonlinear flexural elements as well as nonlinear soil springs. The analytical results closely followed the experimental test results. A parametric study to predict the behavior of the bridge column with different ground motions and different levels of scouring on the foundation are also discussed.展开更多
基金Project(2019JJ20028)supported by the Outstanding Youth Science Foundations of Hunan Province of ChinaProject(51774321)supported by the National Natural Science Foundation of ChinaProject(2018YFC0604606)supported by the State Key Research Development Program of China。
文摘The deep fissured rock mass is affected by coupled effects of initial ground stress and external dynamic disturbance.In order to study the effect of internal flaw on pre-stressed rock mechanical responses and failure behavior under impact loading,intact granite specimens and specimens with different flaw inclinations are tested by a modified split Hopkinson pressure bar(SHPB)and digital image correlation(DIC)method.The results show that peak strain and dynamic strength of intact specimens and specimens with different flaw angles(α)decrease with the increase of axial static pressure.The 90°flaw has weak reduction effect on peak strain,dynamic strength and combined strength,while 45°and 0°flaws have remarkable reduction effect.Specimens with 90°flaw are suffered combined shear and tensile failure under middle and low axial static pre-stresses,and suffered shear failure under high axial static pre-stresses.Specimens with 45°and 0°flaws are suffered oblique shear failure caused by pre-existing flaw under different axial static pre-stresses.Besides,based on digital image correlation method,it is found that micro-cracks before formation of macro fractures(include shear and tensile fractures)belong to tensile cracks.Tensile and shear strain localizations at pre-existing flaw tip for specimen with 45°and 0°flaws are produced much earlier than that at other positions.
文摘An iterative and full-coupled rotor/fuselage aerodynamic interaction analytical method is developed based upon the rotor free-wake model and the 3-D fuselage panel model. A close vortex/ surface interaction model using the Analytical/Numerical Matching (ANM) was adopted in the method in order to simulate effectively the unsteady close interaction between the rotor tip-vortex and fuselage surface. By the analytical method, the unsteady and steady pressure distribution on the fuselage surface, and the unsteady lift and pitching moment of the fuselage in a rotor interaction environment were calculated for different advance ratios. It is shown that the unsteady aerodynamic loads of the fuselage due to the rotor interaction have the same periodic characteristics as the rotor. The comparisons between the present close vortex/surface interaction model and a previous model, which simply excludes vortex filaments inside the fuselage, were also made and the advantages of the former over the latter were demonstrated in improving unsteady close interaction calculations.
基金supported by the Estonian Research Council (Grant No.PRG1820).
文摘Water entry problems represent complex multiphase flows involving air,water,and structure interaction,occurring rapidly in rough seas,and potentially effecting structural integrity of floating structures.This paper experimentally investigates asymmetric slamming loads acting on a 3-D elastic wedge section.The specimen,featuring two different bottom plates(stiffened and unstiffened),each 4 mm thick,aims to assess the effect of structural stiffness on dynamic loads.The experiments are conducted at different drop heights of 25 cm and 50 cm and varying heel angles from 5°to 25°.The paper describes the experimental conditions,including wedge geometry,material properties,and the test plan.The study explores the influence of heel angle on impact acceleration,revealing an increase in peak acceleration with a higher inclination angle,particularly in the vertical direction.Additionally,the hydrodynamic pressure resulting from asymmetric slamming is presented.The pressure results analyzed and compared at different locations along the length of the wedge.The experimental findings indicate that,despite the leeward side(stiffened)experiencing a smaller hydrodynamic load,the heel angle significantly affects pressure results on the windward side(unstiffened),leading to a more pronounced dynamic response.The time history of pressure results emphasizes the effect of elastic vibrations,particularly noticeable on the unstiffened bottom plate.This study contributes to a deeper understanding of asymmetric slamming on aluminum structures,facilitating the enhancement of mathematical models and the validation of numerical simulations.
文摘Gable roofs with overhangs （eaves） are the common constructions of low-rise buildings on the southeastern coast of China, and they were vulnerable to typhoons from experience. The wind pressure distributions on gable roofs of low-rise buildings are investigated by a series of wind tunnel tests which consist of 99 test cases with various roof pitches, height-depth ratios and width-depth ratios. The block pressure coefficients and worst negative （block） pressure coefficients on different roof regions of low-rise buildings are proposed for the main structure and building envelope, respectively. The effects of roof pitch, height-depth ratio, and width-depth ratio on the pressure coefficients of each region are analyzed in detail. In addition, the pressure coefficients on the roofs for the main structure and building envelope are fitted according to roof pitch, height-depth ratio and width-depth ratio of the low-rise building. Meanwhile, the rationality of the fitting formulas is verified by comparing the fitting results with the codes of different countries. Lastly, the block pressure coefficients and worst negative pressure coefficients are recommended to guide the design of low-rise buildings in typhoon area and act as references for the future＇s modification of wind load codes.
文摘Reconstituted specimens are prepared by means of vacuum preloading. Both static and cyclic triaxial tests are carried out, with the specimens consolidated under different principal stress ratios. A finite element method is put forward for calculating the cumulative deformation of soft clay under cyclic loading.
文摘This paper presents in-situ seismic performance tests of a bridge before its demolition due to accumulated scouring problem. The tests were conducted on three single columns and one caisson-type foundation. The three single columns were 1.8 m in diameter,reinforced by 30-D32 longitudinal reinforcements and laterally hooped by D16 reinforcements with spacing of 20 cm. The column height is 9.54 m,10.59 m and 10.37 m for Column P2,P3,and P4,respectively. Column P2 had no exposed foundation and was subjected to pseudo-dynamic tests with peak ground acceleration of 0.32 g first,followed by one cyclic loading test. Column P3 was the benchmark specimen with exposed length of 1.2 m on its foundation. The exposed length for Column P4 was excavated to 4 m,approximately 1/3 of the foundation length,to study the effect of the scouring problem to the column performance. Both Column P3 and Column P4 were subjected to cyclic loading tests. Based on the test results,due to the large dimension of the caisson foundation and the well graded gravel soil type that provided large lateral resistance,the seismic performance among the three columns had only minor differences. Lateral push tests were also conducted on the caisson foundation at Column P5. The caisson was 12 m long and had circular cross-sections whose diameters were 5 m in the upper portion and 4 m in the lower portion. An analytical model to simulate the test results was developed in the OpenSees platform. The analytical model comprised nonlinear flexural elements as well as nonlinear soil springs. The analytical results closely followed the experimental test results. A parametric study to predict the behavior of the bridge column with different ground motions and different levels of scouring on the foundation are also discussed.
