A series of Ni-CeO2 catalysts were prepared by co-precipitation method with Na2CO3, NaOH, and mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant, respectively. The effect of the precipitants on the catalyti...A series of Ni-CeO2 catalysts were prepared by co-precipitation method with Na2CO3, NaOH, and mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant, respectively. The effect of the precipitants on the catalytic performance, physical and chemical properties of Ni-CeO2 catalysts was investigated with the aid of X-ray diffraction （XRD）, Bmmaner-Emmett-Teller method （BET）, Fou- rier-transform infrared spectroscopy （FT-IR）, thermogravimetry （TG）, and H2-TPR characterizations. The Ni-CeO2 catalysts were exam- ined with respect to their catalytic performance for the reverse water-gas shift reaction, and their catalytic activities were ranked as： Ni-CeO2-CP （Na2CO3：NaOH=I：I）〉Ni-CeO2-CP（Na2CO3）〉Ni-CeO2-CP（NaOH）- Correlating to the characteristic results, it was found that the catalyst prepared by co-precipitation with mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant hadthe most amount of oxygen vacancies accompanied with highly dispersed Ni particles, which made the corresponding Ni-CeO2-CP（Na2CO3：NaOH=I： 1） catalyst exhibit the highest catalytic activity. While the precipitant of Na2CO3 or NaOH resulted in less or no oxygen vacancies in Ni-CeO2 catalysts. As a result, Ni-CeO2-CP（Na2CO3） and Ni-CeO2-CP（NaOH） catalysts presented poor catalytic performance.展开更多
Novel precipitant prepared through carbonation with MgCl2 wastewater generated from rare earth extraction separation process and low-price dolomite as raw materials was studied in this paper. The purification methods ...Novel precipitant prepared through carbonation with MgCl2 wastewater generated from rare earth extraction separation process and low-price dolomite as raw materials was studied in this paper. The purification methods of novel precipitant by adding appropriate oxidizing agent were studied. It was found that optimal purification result could be achieved with sodium hypochlorite as iron removal reagent and the iron removal rate could reach up to 90% when the adding amount was 0.1 vol.%. During the preparation, the particle size and distribution of ceria-based polishing powder were affected obviously by the parameters such as concentration, reaction temperature and feeding rate. The results showed that ceria-based polishing powder with D50 =2.5-3.5 μm and the particle size distribution of 0.65-0.75 μm could be prepared when the concentration of CeCl3 was 0.6 mol/L, the reaction temperature was maintained at 50 °C and the feeding speed was controlled at 25 ml/min. Compared with commercial powder, the self-made polishing powder had roughly the same cutting amount, but the surface finish of polished glass was better than that of commercial polishing powder.展开更多
基金Project supported by Natural Science Foundation of Zhejiang Province(Y4110220)Foundation of the Zhejiang Provincial Department of Education(Y200908245)Foundation of the Dinghai Academy of Science and Technology(201006)
文摘A series of Ni-CeO2 catalysts were prepared by co-precipitation method with Na2CO3, NaOH, and mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant, respectively. The effect of the precipitants on the catalytic performance, physical and chemical properties of Ni-CeO2 catalysts was investigated with the aid of X-ray diffraction （XRD）, Bmmaner-Emmett-Teller method （BET）, Fou- rier-transform infrared spectroscopy （FT-IR）, thermogravimetry （TG）, and H2-TPR characterizations. The Ni-CeO2 catalysts were exam- ined with respect to their catalytic performance for the reverse water-gas shift reaction, and their catalytic activities were ranked as： Ni-CeO2-CP （Na2CO3：NaOH=I：I）〉Ni-CeO2-CP（Na2CO3）〉Ni-CeO2-CP（NaOH）- Correlating to the characteristic results, it was found that the catalyst prepared by co-precipitation with mixed precipitant （Na2CO3：NaOH; 1：1 ratio） as precipitant hadthe most amount of oxygen vacancies accompanied with highly dispersed Ni particles, which made the corresponding Ni-CeO2-CP（Na2CO3：NaOH=I： 1） catalyst exhibit the highest catalytic activity. While the precipitant of Na2CO3 or NaOH resulted in less or no oxygen vacancies in Ni-CeO2 catalysts. As a result, Ni-CeO2-CP（Na2CO3） and Ni-CeO2-CP（NaOH） catalysts presented poor catalytic performance.
基金Project supported by The National High Technology Research and Development Program of China(863Program:2010AA03A405)Twelfth Five-Year National Science and Technology Pillar Program(2012BAE01B02)
文摘Novel precipitant prepared through carbonation with MgCl2 wastewater generated from rare earth extraction separation process and low-price dolomite as raw materials was studied in this paper. The purification methods of novel precipitant by adding appropriate oxidizing agent were studied. It was found that optimal purification result could be achieved with sodium hypochlorite as iron removal reagent and the iron removal rate could reach up to 90% when the adding amount was 0.1 vol.%. During the preparation, the particle size and distribution of ceria-based polishing powder were affected obviously by the parameters such as concentration, reaction temperature and feeding rate. The results showed that ceria-based polishing powder with D50 =2.5-3.5 μm and the particle size distribution of 0.65-0.75 μm could be prepared when the concentration of CeCl3 was 0.6 mol/L, the reaction temperature was maintained at 50 °C and the feeding speed was controlled at 25 ml/min. Compared with commercial powder, the self-made polishing powder had roughly the same cutting amount, but the surface finish of polished glass was better than that of commercial polishing powder.
