New Ag/Ti_2 SnC(Ag/TSC) composites with uniform microstructure were prepared by powder metallurgy. The superior wettability between Ag and Ti_2 SnC was confirmed with a contact angle of 14°. Arc erosion propertie...New Ag/Ti_2 SnC(Ag/TSC) composites with uniform microstructure were prepared by powder metallurgy. The superior wettability between Ag and Ti_2 SnC was confirmed with a contact angle of 14°. Arc erosion properties of Ag/10 wt%Ti_2 SnC(Ag/10 TSC) and Ag/20 wt%Ti_2 SnC(Ag/20 TSC) contacts were investigated under 400 V/100 A/AC-3 and compared with Ag/CdO contact.The Ag/10 TSC contact exhibited comparable arc erosion property to Ag/CdO contact. The fine arc erosion resistance was attributed to the good wettability between Ti_2 SnC and Ag,the good heat-conducting property of Ag/10 TSC, and the slight decomposition of Ti_2 SnC that absorbed part of electric arc energy. The excessive Ti_2 SnC significantly decreased the thermal conducting property of the Ag/20 TSC composite, resulting in the severe heat accumulation that decomposed Ti_2 SnC and deteriorated arc erosion property. The oxidation behavior of Ti_2 SnC under high electric arc temperature was also studied and then an arc erosion mechanism was proposed to get a comprehensive understanding on the arc erosion property of Ag/TSC composites.展开更多
Background Magnetic resonance imaging （MRI） is prone to be deformed by artifacts caused by the presence of metallic materials. The aim of this study was to evaluate the artifacts from galvano-ceramic and metal-ceram...Background Magnetic resonance imaging （MRI） is prone to be deformed by artifacts caused by the presence of metallic materials. The aim of this study was to evaluate the artifacts from galvano-ceramic and metal-ceramic crowns in MRI, in order to analyze their influences on diagnostic interpretation of MRI. Methods Galvano-ceramic and metal-ceramic crowns （Bio98, Wiron99, SP-78, BioKC97） were fabricated with the same model. All materials were imaged by means of 1.5T MRI apparatus with three different sequences, T1-weighted spin-echo （T1-weighted SE）, T2-weighted spin-echo （T2-weighted SE） and Gradient echo （GE）. Mean and standard deviation of distilled water signal intensity （St） around the sample in the region of interest （500 mm^2） enclosing the whole artifacts were determined, and compared for evaluation of the homogeneity of signal intensity. Images around the sample were acquired and evaluated. Results There were statistically significant differences in the values of signal intensity between acrylic resin control and BioKC97, Wiron99 in the three sequences （P〈0.001）. The mean values of signal intensity for Bio98, SP-78 were significantly different from that of acrylic resin control （RE） in GE sequence （P〈0.001）. No difference was showed between acrylic resin control and galvano-ceramic crown （P 〉0.05）. Images showed that the greatest artifact was a 25 mm ring with distortion in Wiron99 in GE sequence. Conclusions This in vitro study suggested that galvano-ceramic crown had no influence on the MRI, while metal-ceramic crowns caused moderate artifacts in the MRI. Therefore, galvano-ceramic restoration is a valuable alternative in dentistry.展开更多
The porcelain fracture caused by low metal-ceramic bond strength is a critical issue in porcelain fused to metal（PFM） restorations. Surface roughening methods, such as sand blasting, acid etching and alkaline degrea...The porcelain fracture caused by low metal-ceramic bond strength is a critical issue in porcelain fused to metal（PFM） restorations. Surface roughening methods, such as sand blasting, acid etching and alkaline degreasing for the metal matrix are used to increase bond strength. However, the metal matrix of PFM processed by selective laser melting（SLM） has natural rough surface. To explore the effect of the original roughness on metal-ceramic bond strength, two groups of specimen are fabricated by SLM. One group of specimen surface is polished smooth while another group remains the original rough surface. The dental porcelain is fused to the specimens＇ surfaces according to the ISO 9693：1999 standard. To gain the bond strength, a three-point bending test is carried out and X ray energy spectrum analysis（EDS）, scanning electron microscope（SEM） are used to show fracture mode. The results show that the mean bond strength is 116.5 16 MPa of the group with rough surface（Ra= 17.2）, and the fracture mode is cohesive. However, when the surface is smooth （Ra =3.8）, the mean bond strength is 74.5 MPa _＋ 5 MPa and the fracture mode is mixed. The original surface with prominent structures formed by the partly melted powder particles, not only increases surface roughness but also significantly improves the bond strength by forming strong mechanical lock effect. Statistical analysis （Student＇s t-test） demonstrates a significant difference （p〈0.05） of the mean value of bond strength between the two groups. The experiments indicate the natural rough surface can enhance the metal-ceramic bond strength to over four times the minimum value （25 MPa） of the ISO 9693：1999 standard. It is found that the natural rough surface of SLM-made PFM can eliminate the porcelain collapse defect produced by traditional casting method in PFM restorations.展开更多
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 51731004, 51671054, and 51501038)the Fundamental Research Funds for the Central Universities in China (Grant Nos. 2242018K40108 and 2242018K40109) were highly appreciated
文摘New Ag/Ti_2 SnC(Ag/TSC) composites with uniform microstructure were prepared by powder metallurgy. The superior wettability between Ag and Ti_2 SnC was confirmed with a contact angle of 14°. Arc erosion properties of Ag/10 wt%Ti_2 SnC(Ag/10 TSC) and Ag/20 wt%Ti_2 SnC(Ag/20 TSC) contacts were investigated under 400 V/100 A/AC-3 and compared with Ag/CdO contact.The Ag/10 TSC contact exhibited comparable arc erosion property to Ag/CdO contact. The fine arc erosion resistance was attributed to the good wettability between Ti_2 SnC and Ag,the good heat-conducting property of Ag/10 TSC, and the slight decomposition of Ti_2 SnC that absorbed part of electric arc energy. The excessive Ti_2 SnC significantly decreased the thermal conducting property of the Ag/20 TSC composite, resulting in the severe heat accumulation that decomposed Ti_2 SnC and deteriorated arc erosion property. The oxidation behavior of Ti_2 SnC under high electric arc temperature was also studied and then an arc erosion mechanism was proposed to get a comprehensive understanding on the arc erosion property of Ag/TSC composites.
文摘Background Magnetic resonance imaging （MRI） is prone to be deformed by artifacts caused by the presence of metallic materials. The aim of this study was to evaluate the artifacts from galvano-ceramic and metal-ceramic crowns in MRI, in order to analyze their influences on diagnostic interpretation of MRI. Methods Galvano-ceramic and metal-ceramic crowns （Bio98, Wiron99, SP-78, BioKC97） were fabricated with the same model. All materials were imaged by means of 1.5T MRI apparatus with three different sequences, T1-weighted spin-echo （T1-weighted SE）, T2-weighted spin-echo （T2-weighted SE） and Gradient echo （GE）. Mean and standard deviation of distilled water signal intensity （St） around the sample in the region of interest （500 mm^2） enclosing the whole artifacts were determined, and compared for evaluation of the homogeneity of signal intensity. Images around the sample were acquired and evaluated. Results There were statistically significant differences in the values of signal intensity between acrylic resin control and BioKC97, Wiron99 in the three sequences （P〈0.001）. The mean values of signal intensity for Bio98, SP-78 were significantly different from that of acrylic resin control （RE） in GE sequence （P〈0.001）. No difference was showed between acrylic resin control and galvano-ceramic crown （P 〉0.05）. Images showed that the greatest artifact was a 25 mm ring with distortion in Wiron99 in GE sequence. Conclusions This in vitro study suggested that galvano-ceramic crown had no influence on the MRI, while metal-ceramic crowns caused moderate artifacts in the MRI. Therefore, galvano-ceramic restoration is a valuable alternative in dentistry.
基金supported by the Royal Academy of Engineering Research Exchanges with China and UK(Grant No.2012-P02)National Key Technology R&D Program of Ministry of Science and Technology of China(Grant No.2012BAF08B03)National Natural Science Foundation of China(Grant No.51375189)
文摘The porcelain fracture caused by low metal-ceramic bond strength is a critical issue in porcelain fused to metal（PFM） restorations. Surface roughening methods, such as sand blasting, acid etching and alkaline degreasing for the metal matrix are used to increase bond strength. However, the metal matrix of PFM processed by selective laser melting（SLM） has natural rough surface. To explore the effect of the original roughness on metal-ceramic bond strength, two groups of specimen are fabricated by SLM. One group of specimen surface is polished smooth while another group remains the original rough surface. The dental porcelain is fused to the specimens＇ surfaces according to the ISO 9693：1999 standard. To gain the bond strength, a three-point bending test is carried out and X ray energy spectrum analysis（EDS）, scanning electron microscope（SEM） are used to show fracture mode. The results show that the mean bond strength is 116.5 16 MPa of the group with rough surface（Ra= 17.2）, and the fracture mode is cohesive. However, when the surface is smooth （Ra =3.8）, the mean bond strength is 74.5 MPa _＋ 5 MPa and the fracture mode is mixed. The original surface with prominent structures formed by the partly melted powder particles, not only increases surface roughness but also significantly improves the bond strength by forming strong mechanical lock effect. Statistical analysis （Student＇s t-test） demonstrates a significant difference （p〈0.05） of the mean value of bond strength between the two groups. The experiments indicate the natural rough surface can enhance the metal-ceramic bond strength to over four times the minimum value （25 MPa） of the ISO 9693：1999 standard. It is found that the natural rough surface of SLM-made PFM can eliminate the porcelain collapse defect produced by traditional casting method in PFM restorations.
