Developing efficient,stable and economical electrocatalyst for oxygen evolution reaction(OER)is a significant pathway to produce clean energy from water splitting.Herein,the promising and highly efficient porous CoCrF...Developing efficient,stable and economical electrocatalyst for oxygen evolution reaction(OER)is a significant pathway to produce clean energy from water splitting.Herein,the promising and highly efficient porous CoCrFeNiMo high entropy alloys(HEAs)were prepared by microwave sintering using Mg space holder.Owing to unique properties of high entropy alloys and abundant active surface area,the porous CoCrFeNiMo-20 Mg exhibits excellent catalytic performance and prominent electrochemical stability with a low overpotential of 220 mV to reach current density of 10 mA cm^(-2),a small Tafel slope of 59.0 mV dec^(-1) and long-term durability for 24 h in 1.0 M KOH.The results of microstructure and element states indicate that crystal defects,porous structure and villous hydroxides are the reasons for high OER performance of the CoCrFeNiMo.This work not only provides a new way to prepare electrocatalysts,but also proves the important application of high entropy alloys in functional materials.展开更多
In this paper, by introducing some parameters and estimating the weight coefficient, we give a new Hilbert’s inequality with the integral in whole plane and with a non-homogeneous and the equivalent form is given as ...In this paper, by introducing some parameters and estimating the weight coefficient, we give a new Hilbert’s inequality with the integral in whole plane and with a non-homogeneous and the equivalent form is given as well. The best constant factor is calculated by the way of Complex Analysis.展开更多
In this paper. based on large deviation formulas established in stronger topology generated by Hlder norm, we obtain the functional limit theorems for C-R increments of k-dimensional Brownian motion in Hlder norm
The forming defects, including thinning, rupture, wrinkling and springback, usually arising in producing a side-door impact beam, were investigated by trial and numerical simulation. A temperature-related constitutive...The forming defects, including thinning, rupture, wrinkling and springback, usually arising in producing a side-door impact beam, were investigated by trial and numerical simulation. A temperature-related constitutive model specific to the temperature range from 350 °C to 500 °C was established and used for the numerical simulation. The trial and numerical simulation were conducted to clarify the quantitative characteristics of forming defects and to analyze the effects of process parameters on the forming defects. Results show that the rupture situation is ameliorated and the springback is eliminated in the aluminum alloy hot stamping. The wrinkling severity decreases with increasing blank holder force (BHF), but the BHF greater than 15 kN causes the rupture at the deepest drawing position of workpiece. The forming defects are avoided with lubricant in the feasible ranges of process parameters: the BHF of 3 to 5 kN and the stamping speed of 50 to 200 mm/s.展开更多
The author establishes a large deviation for k-dimensional Brownian motion B in stronger topology, by which the functional modulus of continuity for B in Holder norm can be obtained.
On the basis of the Cauchy integral formulas for regular and biregular functions, we define some Cauchy-type singular integral operators. Then we discuss the Holder continuous property of some singular integral operat...On the basis of the Cauchy integral formulas for regular and biregular functions, we define some Cauchy-type singular integral operators. Then we discuss the Holder continuous property of some singular integral operators with one integral variable. Then we divide a singular integral operator with two variables into three parts and prove its Holder continuous property on the boundary.展开更多
A VBHF(Variable Blank Holder Force) optimization strategy was employed to determine the optimal time-variable and spatial-variable BHF trajectories,aiming at improving the formability of automobile panels with aluminu...A VBHF(Variable Blank Holder Force) optimization strategy was employed to determine the optimal time-variable and spatial-variable BHF trajectories,aiming at improving the formability of automobile panels with aluminum alloy sheet.The strategy was implemented based on adaptive simulation to calculate the critical wrinkling BHF for each segmented binder of the Numisheet' 05 deck lid in a single round of simulation.The thickness comparison of the stamped part under optimal VBHF and constant BHF shows that the variance of the four sections is decreased by 70%,44%,64% and 61%,respectively,which indicates significant improvement in thickness distribution and variation control.The investigation through strain path comparison reveals the fundamental reason of formability improvement.The study proves the applicability of the new VBHF optimization strategy to complex parts with aluminum alloy sheet.展开更多
基金The authors gratefully acknowledge the financial support of the project from the National Natural Science Foundation of China(51862026)the Natural Science Foundation of Jiangxi Province(20202ACBL214011,20192ACBL21048)the Aeronautical Science Foundation of China(2017ZF56027)。
文摘Developing efficient,stable and economical electrocatalyst for oxygen evolution reaction(OER)is a significant pathway to produce clean energy from water splitting.Herein,the promising and highly efficient porous CoCrFeNiMo high entropy alloys(HEAs)were prepared by microwave sintering using Mg space holder.Owing to unique properties of high entropy alloys and abundant active surface area,the porous CoCrFeNiMo-20 Mg exhibits excellent catalytic performance and prominent electrochemical stability with a low overpotential of 220 mV to reach current density of 10 mA cm^(-2),a small Tafel slope of 59.0 mV dec^(-1) and long-term durability for 24 h in 1.0 M KOH.The results of microstructure and element states indicate that crystal defects,porous structure and villous hydroxides are the reasons for high OER performance of the CoCrFeNiMo.This work not only provides a new way to prepare electrocatalysts,but also proves the important application of high entropy alloys in functional materials.
文摘In this paper, by introducing some parameters and estimating the weight coefficient, we give a new Hilbert’s inequality with the integral in whole plane and with a non-homogeneous and the equivalent form is given as well. The best constant factor is calculated by the way of Complex Analysis.
文摘In this paper. based on large deviation formulas established in stronger topology generated by Hlder norm, we obtain the functional limit theorems for C-R increments of k-dimensional Brownian motion in Hlder norm
基金Project(P2014-15)supported by the State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology,ChinaProject supported by the Beijing Laboratory of Metallic Materials and Processing for Modern Transportation,China
文摘The forming defects, including thinning, rupture, wrinkling and springback, usually arising in producing a side-door impact beam, were investigated by trial and numerical simulation. A temperature-related constitutive model specific to the temperature range from 350 °C to 500 °C was established and used for the numerical simulation. The trial and numerical simulation were conducted to clarify the quantitative characteristics of forming defects and to analyze the effects of process parameters on the forming defects. Results show that the rupture situation is ameliorated and the springback is eliminated in the aluminum alloy hot stamping. The wrinkling severity decreases with increasing blank holder force (BHF), but the BHF greater than 15 kN causes the rupture at the deepest drawing position of workpiece. The forming defects are avoided with lubricant in the feasible ranges of process parameters: the BHF of 3 to 5 kN and the stamping speed of 50 to 200 mm/s.
文摘The author establishes a large deviation for k-dimensional Brownian motion B in stronger topology, by which the functional modulus of continuity for B in Holder norm can be obtained.
基金Supported by the National Natural Science Foundation of China (10771049, 10801043)the Hebei Natural Science Foundation (A2007000225, A2010000346)
文摘On the basis of the Cauchy integral formulas for regular and biregular functions, we define some Cauchy-type singular integral operators. Then we discuss the Holder continuous property of some singular integral operators with one integral variable. Then we divide a singular integral operator with two variables into three parts and prove its Holder continuous property on the boundary.
基金Project(50934011) supported by the National Natural Science Foundation of ChinaProject(20080430085) supported by the China Postdoctoral Science Foundation
文摘A VBHF(Variable Blank Holder Force) optimization strategy was employed to determine the optimal time-variable and spatial-variable BHF trajectories,aiming at improving the formability of automobile panels with aluminum alloy sheet.The strategy was implemented based on adaptive simulation to calculate the critical wrinkling BHF for each segmented binder of the Numisheet' 05 deck lid in a single round of simulation.The thickness comparison of the stamped part under optimal VBHF and constant BHF shows that the variance of the four sections is decreased by 70%,44%,64% and 61%,respectively,which indicates significant improvement in thickness distribution and variation control.The investigation through strain path comparison reveals the fundamental reason of formability improvement.The study proves the applicability of the new VBHF optimization strategy to complex parts with aluminum alloy sheet.
