High strength low alloy（HSLA） steels have been widely used in pipelines,power plant components,civil structures and so on,due to their outstanding mechanical properties as high strength and toughness,and excellent w...High strength low alloy（HSLA） steels have been widely used in pipelines,power plant components,civil structures and so on,due to their outstanding mechanical properties as high strength and toughness,and excellent weldability.Multi-phase microstructures containing acicular ferrite or acicular ferrite dominated phase have been proved to possess good comprehensive properties in HSLA steels.This paper mainly focuses on the formation mechanisms and control methods of acicular ferrite in HSLA steels.Effect of austenitizing conditions,continuous cooling rate,and isothermal quenching time and temperature on acicular ferrite transformation was reviewed.Furthermore,the modified process to control the formation of multi-phase microstructures containing acicular ferrite,as intercritical heat treatments,step quenching treatments and thermo-mechanical controlled processing,was summarized.The favorable combination of mechanical properties can be achieved by these modified treatments.展开更多
The addition of microalloying elements (MAE) to low C-Mn-Si HSLA steels has led to many benefits to the producers,fabricators and end-users.Microstructural improvements such as microstructural refinement,higher disloc...The addition of microalloying elements (MAE) to low C-Mn-Si HSLA steels has led to many benefits to the producers,fabricators and end-users.Microstructural improvements such as microstructural refinement,higher dislocation and sub-grain boundary densities and finer M-A-C distributions have led to higher strength,improved toughness and better formability.These improvements can often be traced to the MA addition.In steels for load-bearing applications,the combination of MAE with hardenability additions (Cr,Mo,B,etc.) and lower transformation temperatures has led to much higher strength levels than what were available a few years ago.The resulting nonpolygonal,bainitic and martensitic ferrite microstructures have not only higher strengths but also adequate levels of improved ductility and toughness.Hot strip,plate and pipe applications have benefitted from these developments.Similar improvements have been found in the microalloyed forging steels,where the change from pearlite-ferrite to bainitic ferrite microstructures has led to higher strengths and improved high-cycle fatigue resistance,with little penalty in ductility and toughness.In the cold rolled gauges,both the so-called Advanced High Strength Steels (DP,TRIP and Complex Phase Steels) and the martensitic direct-quenched and press-quenched steels,along with the Interstitial-Free steels,have benefited from MAE additions,especially in the very popular zinc-coated sheet form.This paper will briefly review each of these topic areas,and the underlying physical metallurgy will be discussed.展开更多
Majority of the buildings,including industrial buildings,are constructed using either structural steel (plates and structural shapes) or deformed bar steel reinforced concrete.Such buildings,however,must be designed t...Majority of the buildings,including industrial buildings,are constructed using either structural steel (plates and structural shapes) or deformed bar steel reinforced concrete.Such buildings,however,must be designed to be safe and serviceable during construction and during use and occupancy.These objectives can be easily achieved by the use of steels having superior mechanical properties,ductility,weldability,fire resistance,etc.Over the years,the steel industry has made improvements in steel making technologies resulting in high strength low alloy (HSLA) steels with superior steel properties well suited for building construction.First part of this paper presents the structural design considerations,and the constructional considerations associated with the building structures in general,and steel structures in particular.This second part of the paper looks at the acceptance criteria for HSLA steels for North American building codes and construction.The third part of the paper presents the structural properties of currently available HSLA steels for building construction.The discussion focuses on hot-rolled structural steel shapes as well as deformed steel bars for concrete reinforcement.The paper argues that Niobium microalloying is the key to achieving superior properties in such steels.展开更多
The effect of relaxation after finished rolling on structures and properties of four microalloyed steel with different content of Nb and Ti was investigated. By alloy designing and control rolling + relaxation-precipi...The effect of relaxation after finished rolling on structures and properties of four microalloyed steel with different content of Nb and Ti was investigated. By alloy designing and control rolling + relaxation-precipitation-control phase trail storm ati on (RPC) process, a new 800 MPa grade HSLA plate steel could be obtained, the microstructure is composite ultra-fine lath bainite/martensite. The tempering process and mechanical properties of this kind of HSLA steel were investigated. The yield strength can achieve 800 MPa, and the ductility and impact toughness is satisfied.展开更多
基金the China National Funds for Distinguished Young Scientists (Grant No.51325401)the National Magnetic Confinement Fusion Energy Research Project (Grant No.2015GB119001)the National Natural Science Foundation of China (Grant Nos.51501126,51474156 and U1660201) for grant and financial support
文摘High strength low alloy（HSLA） steels have been widely used in pipelines,power plant components,civil structures and so on,due to their outstanding mechanical properties as high strength and toughness,and excellent weldability.Multi-phase microstructures containing acicular ferrite or acicular ferrite dominated phase have been proved to possess good comprehensive properties in HSLA steels.This paper mainly focuses on the formation mechanisms and control methods of acicular ferrite in HSLA steels.Effect of austenitizing conditions,continuous cooling rate,and isothermal quenching time and temperature on acicular ferrite transformation was reviewed.Furthermore,the modified process to control the formation of multi-phase microstructures containing acicular ferrite,as intercritical heat treatments,step quenching treatments and thermo-mechanical controlled processing,was summarized.The favorable combination of mechanical properties can be achieved by these modified treatments.
文摘The addition of microalloying elements (MAE) to low C-Mn-Si HSLA steels has led to many benefits to the producers,fabricators and end-users.Microstructural improvements such as microstructural refinement,higher dislocation and sub-grain boundary densities and finer M-A-C distributions have led to higher strength,improved toughness and better formability.These improvements can often be traced to the MA addition.In steels for load-bearing applications,the combination of MAE with hardenability additions (Cr,Mo,B,etc.) and lower transformation temperatures has led to much higher strength levels than what were available a few years ago.The resulting nonpolygonal,bainitic and martensitic ferrite microstructures have not only higher strengths but also adequate levels of improved ductility and toughness.Hot strip,plate and pipe applications have benefitted from these developments.Similar improvements have been found in the microalloyed forging steels,where the change from pearlite-ferrite to bainitic ferrite microstructures has led to higher strengths and improved high-cycle fatigue resistance,with little penalty in ductility and toughness.In the cold rolled gauges,both the so-called Advanced High Strength Steels (DP,TRIP and Complex Phase Steels) and the martensitic direct-quenched and press-quenched steels,along with the Interstitial-Free steels,have benefited from MAE additions,especially in the very popular zinc-coated sheet form.This paper will briefly review each of these topic areas,and the underlying physical metallurgy will be discussed.
文摘Majority of the buildings,including industrial buildings,are constructed using either structural steel (plates and structural shapes) or deformed bar steel reinforced concrete.Such buildings,however,must be designed to be safe and serviceable during construction and during use and occupancy.These objectives can be easily achieved by the use of steels having superior mechanical properties,ductility,weldability,fire resistance,etc.Over the years,the steel industry has made improvements in steel making technologies resulting in high strength low alloy (HSLA) steels with superior steel properties well suited for building construction.First part of this paper presents the structural design considerations,and the constructional considerations associated with the building structures in general,and steel structures in particular.This second part of the paper looks at the acceptance criteria for HSLA steels for North American building codes and construction.The third part of the paper presents the structural properties of currently available HSLA steels for building construction.The discussion focuses on hot-rolled structural steel shapes as well as deformed steel bars for concrete reinforcement.The paper argues that Niobium microalloying is the key to achieving superior properties in such steels.
文摘The effect of relaxation after finished rolling on structures and properties of four microalloyed steel with different content of Nb and Ti was investigated. By alloy designing and control rolling + relaxation-precipitation-control phase trail storm ati on (RPC) process, a new 800 MPa grade HSLA plate steel could be obtained, the microstructure is composite ultra-fine lath bainite/martensite. The tempering process and mechanical properties of this kind of HSLA steel were investigated. The yield strength can achieve 800 MPa, and the ductility and impact toughness is satisfied.
