The Y_2O_3 thin film was applied on Fe-3Al intermetallic compound by electrodeposition and thermal decomposition. The cyclic oxidation of the Fe-3Al specimens with and without surfaceapplied Y_2O_3 thin film was carri...The Y_2O_3 thin film was applied on Fe-3Al intermetallic compound by electrodeposition and thermal decomposition. The cyclic oxidation of the Fe-3Al specimens with and without surfaceapplied Y_2O_3 thin film was carried out at 900 ℃ in air. The results show that the selective oxidation of Al in Fe-3Al was promoted, and both of the plasticity and the adhesion of the oxide scale formed on Fe3Al were improved and the high temperature oxidation resistance of Fe3Al was enhanced markedly.展开更多
Positron lifetime measurements have been performed in binary Fe3Al and Fe3Al doping with Nb or Si alloys. The densities of valence electrons of the bulk and microdefects in all tested samples have been calculated by u...Positron lifetime measurements have been performed in binary Fe3Al and Fe3Al doping with Nb or Si alloys. The densities of valence electrons of the bulk and microdefects in all tested samples have been calculated by using the positron lifetime parameters. Density of valence electron is low in the bulk of Fe3Al alloy. It indicates that, the 3d electrons in a Fe atom have strong-localized properties and tend to form covalent bonds with Al atoms, and the bonding nature in Fe3Al is a mixture of metallic and covalent bonds. The density of valence electron is very low in the defects of Fe3Al grain boundary, which makes the bonding cohesion in grain boundary quite weak. The addition of Si to Fe3Al gives rise to the decrease of the densities of valence electrons in the bulk and the grain boundary thus the metallic bonding cohesion. This makes the alloy more brittle. The addition of Nb to Fe3Al results in the decrease of the ordering energy of the alloy and increases the density of valence electron and the bonding cohesion of the grain boundary. However, since the radius of Nb atom is larger than that of Fe atom, when Nb atoms substitute for Fe atoms, they will distort the lattice and enlarge the volume of the lattice, which decreases the density of valence electron and the cohesion of metallic bond in the bulk of the alloy.展开更多
The effects of addition of chromium or boron on room temperature tensile properties,fracture behavior and susceptibility to test environments (air vs. vacuuwi of forged Fe3Al have been investigated. The results indica...The effects of addition of chromium or boron on room temperature tensile properties,fracture behavior and susceptibility to test environments (air vs. vacuuwi of forged Fe3Al have been investigated. The results indicated that both chromium and boron result in increasing room temperuture ductility and fracture strength of the Fe3Al alloy whether tested in air or in vacuum. The susceptibility to test envimnment was described with the embrittlement index I: I=(δv-δA)/δv. The embrittlement indexes, for Fe-30Al, Fe-30Al-4Cr and Fe-30Al-0. 13B (at. %), are 24%, 37% and 29%,respectively. Scanning electron microscope examination of fracture surface revealed that the fracture mode of the three alloys remains unchanged, and all of them exhibited a transgranular cleavage fracture mode when tested in vacuum or air.展开更多
文摘The Y_2O_3 thin film was applied on Fe-3Al intermetallic compound by electrodeposition and thermal decomposition. The cyclic oxidation of the Fe-3Al specimens with and without surfaceapplied Y_2O_3 thin film was carried out at 900 ℃ in air. The results show that the selective oxidation of Al in Fe-3Al was promoted, and both of the plasticity and the adhesion of the oxide scale formed on Fe3Al were improved and the high temperature oxidation resistance of Fe3Al was enhanced markedly.
基金Project supported by the National Natural Science Foundation of China (Grant No. 59561001)the Foundation of Guangxi Education Committee
文摘Positron lifetime measurements have been performed in binary Fe3Al and Fe3Al doping with Nb or Si alloys. The densities of valence electrons of the bulk and microdefects in all tested samples have been calculated by using the positron lifetime parameters. Density of valence electron is low in the bulk of Fe3Al alloy. It indicates that, the 3d electrons in a Fe atom have strong-localized properties and tend to form covalent bonds with Al atoms, and the bonding nature in Fe3Al is a mixture of metallic and covalent bonds. The density of valence electron is very low in the defects of Fe3Al grain boundary, which makes the bonding cohesion in grain boundary quite weak. The addition of Si to Fe3Al gives rise to the decrease of the densities of valence electrons in the bulk and the grain boundary thus the metallic bonding cohesion. This makes the alloy more brittle. The addition of Nb to Fe3Al results in the decrease of the ordering energy of the alloy and increases the density of valence electron and the bonding cohesion of the grain boundary. However, since the radius of Nb atom is larger than that of Fe atom, when Nb atoms substitute for Fe atoms, they will distort the lattice and enlarge the volume of the lattice, which decreases the density of valence electron and the cohesion of metallic bond in the bulk of the alloy.
文摘The effects of addition of chromium or boron on room temperature tensile properties,fracture behavior and susceptibility to test environments (air vs. vacuuwi of forged Fe3Al have been investigated. The results indicated that both chromium and boron result in increasing room temperuture ductility and fracture strength of the Fe3Al alloy whether tested in air or in vacuum. The susceptibility to test envimnment was described with the embrittlement index I: I=(δv-δA)/δv. The embrittlement indexes, for Fe-30Al, Fe-30Al-4Cr and Fe-30Al-0. 13B (at. %), are 24%, 37% and 29%,respectively. Scanning electron microscope examination of fracture surface revealed that the fracture mode of the three alloys remains unchanged, and all of them exhibited a transgranular cleavage fracture mode when tested in vacuum or air.
