The distribution and transformation of added and native Ni in purple soils were investigated with both sequential extraction procedure and isotopic tracer technique.The distribution of added and native Ni was greatly ...The distribution and transformation of added and native Ni in purple soils were investigated with both sequential extraction procedure and isotopic tracer technique.The distribution of added and native Ni was greatly dependent on soil properties.Low soil PH was favorable for soluble plus exchangeable (EX) Fraction,while Fe/Mn oxides and clay for Fe/Mn oxide bound (OX) and residual (RES) fractions. The added Ni,however,has not yet reached the distribution equilibrium up to the 150th day after incubation.This was reflected in the fact that the proportion of EX fraction from added Ni was 150%-600% as much as that of native Ni, while that of RES fraction was only about 80%.Once entering soil, the applied soluble Ni was rapidly transformed into Other fractions, but the organic complexed (OM) fraction of added Ni was relatively stable during incubation.The carbonate bound(CAB) fraction showed a progressive increase and attained a peak value after 0-14 d of incubation and thereafter decreased gradually. The occurrence time of this peak advanced as initial soil PH increased, but the peak would disappear when initial soil pH was higher than 7.5(or containing free CaCO3). The transformation processes of the EX,OX and RES fractions could be described by Elovich and two-constant rate equstions,and the rates were positively correlated with soil pH,CEC and clay.These findings could explain why there are differences in ecological and environmental effects of Ni in different soils and at various intervals.展开更多
Based on the nearest surface function formula, a quantitative formula to measure the overlapping degree between the interfacial transition zone （ITZ） of neighboring aggregate particles was put forward. The formula w...Based on the nearest surface function formula, a quantitative formula to measure the overlapping degree between the interfacial transition zone （ITZ） of neighboring aggregate particles was put forward. The formula was further deduced to quantitatively analyze the influence of the volume fraction of aggregate, ITZ thickness and the maximum aggregate diameter on the overlapping degree between neighboring ITZ. The volume of ITZ was quantitatively calculated in actual concrete by comparing the nearest surface function formula with an approximate method, that is the surface area of the aggregates multiplied by the uniform thickness of the ITZ layers. The results showed that the influencing order of these three factors on the overlapping degree between neighboring ITZ in turn was the interface thickness, aggregate volume fraction and the maximum aggregate diameter; As long as the interface thickness 50 μm and the aggregate volume fraction 50%, the calculated error between two methods mentioned above is about 10 %.展开更多
The determination of volume fraction of interracial transition zone （ITZ） is very important for investigating the quantitative relationship between the microstructure and macroscopical property of concrete. In this ...The determination of volume fraction of interracial transition zone （ITZ） is very important for investigating the quantitative relationship between the microstructure and macroscopical property of concrete. In this paper, based on Lu and Torquato＇s most nearest surface distribution function, a calculating process of volume fraction of ITZ is given in detail according to the actual sieve curve in concrete. Then, quantitative formulas are put forward to measure the influencing factors on the ｜TZ vol- ume fraction. In order to validate the given model, the volume fractions of ITZ obtained by numerical calculation are compared with those by computer simulation. The results show that the two are in good agreement. The order of the factors influencing the ITZ volume fraction is the ITZ thickness, the volume fraction of aggregate and the maximum aggregate diameter for Fuller gradation in turn. The 1TZ volume fraction obtained from the equal volume fraction （EVF） gradation is always larger than that from the Fuller gradation for a given volume fraction of aggregate.展开更多
文摘The distribution and transformation of added and native Ni in purple soils were investigated with both sequential extraction procedure and isotopic tracer technique.The distribution of added and native Ni was greatly dependent on soil properties.Low soil PH was favorable for soluble plus exchangeable (EX) Fraction,while Fe/Mn oxides and clay for Fe/Mn oxide bound (OX) and residual (RES) fractions. The added Ni,however,has not yet reached the distribution equilibrium up to the 150th day after incubation.This was reflected in the fact that the proportion of EX fraction from added Ni was 150%-600% as much as that of native Ni, while that of RES fraction was only about 80%.Once entering soil, the applied soluble Ni was rapidly transformed into Other fractions, but the organic complexed (OM) fraction of added Ni was relatively stable during incubation.The carbonate bound(CAB) fraction showed a progressive increase and attained a peak value after 0-14 d of incubation and thereafter decreased gradually. The occurrence time of this peak advanced as initial soil PH increased, but the peak would disappear when initial soil pH was higher than 7.5(or containing free CaCO3). The transformation processes of the EX,OX and RES fractions could be described by Elovich and two-constant rate equstions,and the rates were positively correlated with soil pH,CEC and clay.These findings could explain why there are differences in ecological and environmental effects of Ni in different soils and at various intervals.
基金Funded by the National Basic Research Program of China (No.2009CB623203)National High-tech R&D Program of China (No.2008AA030794)Postgraduates Research Innovation in University of Jiangsu Province in China (No.CX10B-064Z)
文摘Based on the nearest surface function formula, a quantitative formula to measure the overlapping degree between the interfacial transition zone （ITZ） of neighboring aggregate particles was put forward. The formula was further deduced to quantitatively analyze the influence of the volume fraction of aggregate, ITZ thickness and the maximum aggregate diameter on the overlapping degree between neighboring ITZ. The volume of ITZ was quantitatively calculated in actual concrete by comparing the nearest surface function formula with an approximate method, that is the surface area of the aggregates multiplied by the uniform thickness of the ITZ layers. The results showed that the influencing order of these three factors on the overlapping degree between neighboring ITZ in turn was the interface thickness, aggregate volume fraction and the maximum aggregate diameter; As long as the interface thickness 50 μm and the aggregate volume fraction 50%, the calculated error between two methods mentioned above is about 10 %.
基金supported by the National Basic Research Program of China ("973" Project) (Grant No. 2009CB623200)the National High-Tech Research and Development Program of China ("863" Project)(Grant No. 2008AA030794)
文摘The determination of volume fraction of interracial transition zone （ITZ） is very important for investigating the quantitative relationship between the microstructure and macroscopical property of concrete. In this paper, based on Lu and Torquato＇s most nearest surface distribution function, a calculating process of volume fraction of ITZ is given in detail according to the actual sieve curve in concrete. Then, quantitative formulas are put forward to measure the influencing factors on the ｜TZ vol- ume fraction. In order to validate the given model, the volume fractions of ITZ obtained by numerical calculation are compared with those by computer simulation. The results show that the two are in good agreement. The order of the factors influencing the ITZ volume fraction is the ITZ thickness, the volume fraction of aggregate and the maximum aggregate diameter for Fuller gradation in turn. The 1TZ volume fraction obtained from the equal volume fraction （EVF） gradation is always larger than that from the Fuller gradation for a given volume fraction of aggregate.
