The Box–Behnken design and desirability approach were used to investigate and optimize the process parameters for aluminum reduction cells related to alumina dissolution. The bath temperature, alumina content, curren...The Box–Behnken design and desirability approach were used to investigate and optimize the process parameters for aluminum reduction cells related to alumina dissolution. The bath temperature, alumina content, current and alumina temperature were chosen as the design parameters. The content of cumulative dissolved alumina(CCDA) and the relative deviation from the target content(RDTC) were adopted as the responses. The interactive influence results show that increasing the bath temperature and alumina temperature, as well as decreasing the alumina content, can increase CCDA. Increasing the bath temperature and lowering the current are beneficial for obtaining a more uniform alumina distribution. The optimal operating parameters were determined to be as follows: bath temperature of 958.8 ℃, alumina content of 2.679 wt.%, current of 300 kA and alumina temperature of 200 ℃.展开更多
Plant derived natural fibers have been widely investigated as alternatives to synthetic fibers in reinforcing polymers.Researchers over the years have explored many plant fibers using different extraction processes to...Plant derived natural fibers have been widely investigated as alternatives to synthetic fibers in reinforcing polymers.Researchers over the years have explored many plant fibers using different extraction processes to study their physical,chemical,and mechanical properties.In this context,the present study relates to the extraction,characterization,and optimization of Typha angustata L.stem fibers.For this purpose,desirability functions and response surface methodology were applied to simultaneously optimize the diameter(D),linear density(LD);yield(Y),lignin fraction(L),and tenacity(T)of Typha stem fibers.Typha stems have been subjected to both alkali(NaOH)and enzymatic(pectinex ultra-SPL)treatments.Three levels of process variables including enzyme concentration(10,15,and 20 ml/L)and treatment duration(10,15,and 20 days)were used to design the experiments according to the factorial design.Experimental results were examined by analysis of variance and fitted to second order polynomial model using multiple regression analysis.The Derringer’s desirability function released that the values of process variables generating optimized diameter,linear density,yield,lignin ratio and tenacity are 20 ml/L and 20 days for concentration of pectinex ultra-SPL enzyme and treatment duration,respectively.Confirmation was performed and high degree of correlation was found between the experimental and statistical values.Moreover,the morphological structure has been investigated by the scanning electron microscope,showing a crenelated structure of ultimate fiber bundles of cellulose composing the Typha fiber.Compared to Typha stem non-treated fibers(TSNTF),Typha stem combined treated fibers(TSCTF),brings to improve mechanical properties.This change in mechanical properties is affected by modifying the fiber structure showing alpha cellulose of(66.86%)and lignin ratio of(10.83%)with a crystallinity index of(58.47%).展开更多
In this study,2~5 （five factors at two-level factorial design） design of experiment was applied to investigate a set of optimal machining parameters to achieve a minimum surface roughness value for Abies nordmannian...In this study,2~5 （five factors at two-level factorial design） design of experiment was applied to investigate a set of optimal machining parameters to achieve a minimum surface roughness value for Abies nordmanniana.Wood specimens were prepared using different values of spindle speed,feed rate,depth of cut,tool radius,and cutting directions.Average surface roughness （R_z） values were applied using a stylus.The objectives were to：（1）obtain the effective variables of wood surface roughness;（2） analyze which of these factors had an impact on variability in the CNC machining process;（3） evaluate the optimal cutting values within the range of different cutting levels of machining parameters.The results indicate that the design of experiment（DOE） based on the desirability function approach determined the optimal machining parameters successfully,leading to minimum R_a compared to the observed value.Minimum surface roughness values of tangential and radial cutting directions were 3.58 and 3.21 μm,respectively.展开更多
A methodology for the selection of the optimal land uses of the reclamation of mined areas is proposed. It takes into consideration several multi-nature criteria and constraints, including spatial constrains related t...A methodology for the selection of the optimal land uses of the reclamation of mined areas is proposed. It takes into consideration several multi-nature criteria and constraints, including spatial constrains related to the permissible land uses in certain parts of the mined area. The methodology combines desirability functions and evolution searching algorithms for selection of the optimal reclamation scheme. Its application for the reclamation planning of the Amynteon lignite surface mine in Greece indicated that it handles effectively spatial and non-spatial constraints and incorporates easily the decision-makers preferences regarding the reclamation strategy in the optimization procedure.展开更多
The sample preparation of samples conlaining bovine serum albumin（BSA）,e.g..as used in transdermal Franz diffusion cell（FDC） solutions,was evaluated using an analytical qualily-by-design（QbD）approach.Traditional...The sample preparation of samples conlaining bovine serum albumin（BSA）,e.g..as used in transdermal Franz diffusion cell（FDC） solutions,was evaluated using an analytical qualily-by-design（QbD）approach.Traditional precipitation of BSA by adding an equal volume of organic solvent,often successfully used with conventional HPLC-PDA,was found insufficiently robust when novel fused-core HPLC and/or UPLC-MS methods were used.In this study,three factors（acetonitrile（%）.formic acid（%） and boiling time（min）） were included in the experimental design to determine an optimal and more suitable sample treatment of BSAcontaining FDC solutions.Using a QbD and Derringer desirability（D） approach,combining BSA loss,dilution factor and variability,we constructed an optimal working space with the edge of failure defined as D〈0.9.The design space is modelled and is confirmed to have an ACN range of 83 ± 3% and FA content of 1 ±0.25%.展开更多
Tailings known as solid waste are generated by the mining industry.The development of tailings as wet shotcrete aggregates has significant economic and environmental benefits.The fine particle size of the tailings res...Tailings known as solid waste are generated by the mining industry.The development of tailings as wet shotcrete aggregates has significant economic and environmental benefits.The fine particle size of the tailings results in a large consumption of traditional cement as a cementitious material and insignificant improvement in strength.Therefore,a composite cementitious system of cement and solid waste resources(fly ash and slag powder)is explored for this study.In this paper,the response surface methodology(RSM)is used to optimize the experimental design and a multivariate nonlinear response model with cement,fly ash and slag powder contents as variables are constructed,which can investigate the effect of the composite cementitious system on the strength of tailing wet shotcrete(TWSC).In addition,the information entropy(IE)is introduced and combined with the RSM to evaluate the composite cementitious system.Finally,the desirability function(DF)combined with RSM is used to optimize the composite cementitious system.The results show that the response model constructed in this paper has R^(2)=0.96 and P-value<0.01(the test result of the model is P-value<0.01),which indicates that the model has high reliability.The higher the content of slag powder and cement in the composite cementitious system,the higher the strength and comprehensive score of the TWSC.There is a critical value of fly ash content,which makes the maximum cementation of the composite cementing system.The optimal mix proportion of the composite cementitious system is obtained based on RSM-DF,which leads to the strength of TWSC at different curing time to achieve the expected index.展开更多
Purpose This work aims to study the increase in dead layer thickness of an HPGe N-type detector during its operational period from 2012 to 2018.Methods The dead layer was examined along three Ge-crystal surfaces,such ...Purpose This work aims to study the increase in dead layer thickness of an HPGe N-type detector during its operational period from 2012 to 2018.Methods The dead layer was examined along three Ge-crystal surfaces,such as outer frontal,outer lateral,and inner lateral.These parameters were optimized using response surface methodology(RSM)with a Box–Behnken design(BBD).The Monte Carlo calculations using the GAMOS(Geant4-based Architecture for Medicine-Oriented Simulations)code were performed to evaluate the detector’s efficiency at different values of the inactive germanium layer.Results and conclusion The optimal combination of dead layer thickness has been identified using the desirability function approach,which is a useful tool to optimize multi-response problems.To find the variation in dead layer thickness over the operational period,the optimization procedure was reiterated for both experimental efficiencies measured in 2012 and 2018.The obtained results show that dead layers thickness has increased from 0.6141 mm to 0.7447 mm,0.0803 mm to 2.2721 mm,and 1.5012 mm to 1.6091 mm for the outer frontal,outer lateral,and inner lateral surfaces,respectively.展开更多
基金Project(2010AA065201)supported by the High Technology Research and Development Program of ChinaProject(2018zzts157)supported by the Fundamental Research Funds for the Central Universities of Central South University,China。
文摘The Box–Behnken design and desirability approach were used to investigate and optimize the process parameters for aluminum reduction cells related to alumina dissolution. The bath temperature, alumina content, current and alumina temperature were chosen as the design parameters. The content of cumulative dissolved alumina(CCDA) and the relative deviation from the target content(RDTC) were adopted as the responses. The interactive influence results show that increasing the bath temperature and alumina temperature, as well as decreasing the alumina content, can increase CCDA. Increasing the bath temperature and lowering the current are beneficial for obtaining a more uniform alumina distribution. The optimal operating parameters were determined to be as follows: bath temperature of 958.8 ℃, alumina content of 2.679 wt.%, current of 300 kA and alumina temperature of 200 ℃.
文摘Plant derived natural fibers have been widely investigated as alternatives to synthetic fibers in reinforcing polymers.Researchers over the years have explored many plant fibers using different extraction processes to study their physical,chemical,and mechanical properties.In this context,the present study relates to the extraction,characterization,and optimization of Typha angustata L.stem fibers.For this purpose,desirability functions and response surface methodology were applied to simultaneously optimize the diameter(D),linear density(LD);yield(Y),lignin fraction(L),and tenacity(T)of Typha stem fibers.Typha stems have been subjected to both alkali(NaOH)and enzymatic(pectinex ultra-SPL)treatments.Three levels of process variables including enzyme concentration(10,15,and 20 ml/L)and treatment duration(10,15,and 20 days)were used to design the experiments according to the factorial design.Experimental results were examined by analysis of variance and fitted to second order polynomial model using multiple regression analysis.The Derringer’s desirability function released that the values of process variables generating optimized diameter,linear density,yield,lignin ratio and tenacity are 20 ml/L and 20 days for concentration of pectinex ultra-SPL enzyme and treatment duration,respectively.Confirmation was performed and high degree of correlation was found between the experimental and statistical values.Moreover,the morphological structure has been investigated by the scanning electron microscope,showing a crenelated structure of ultimate fiber bundles of cellulose composing the Typha fiber.Compared to Typha stem non-treated fibers(TSNTF),Typha stem combined treated fibers(TSCTF),brings to improve mechanical properties.This change in mechanical properties is affected by modifying the fiber structure showing alpha cellulose of(66.86%)and lignin ratio of(10.83%)with a crystallinity index of(58.47%).
基金performed in the laboratuary of Istanbul University,Faculty of Forestry where the authors are employed at present
文摘In this study,2~5 （five factors at two-level factorial design） design of experiment was applied to investigate a set of optimal machining parameters to achieve a minimum surface roughness value for Abies nordmanniana.Wood specimens were prepared using different values of spindle speed,feed rate,depth of cut,tool radius,and cutting directions.Average surface roughness （R_z） values were applied using a stylus.The objectives were to：（1）obtain the effective variables of wood surface roughness;（2） analyze which of these factors had an impact on variability in the CNC machining process;（3） evaluate the optimal cutting values within the range of different cutting levels of machining parameters.The results indicate that the design of experiment（DOE） based on the desirability function approach determined the optimal machining parameters successfully,leading to minimum R_a compared to the observed value.Minimum surface roughness values of tangential and radial cutting directions were 3.58 and 3.21 μm,respectively.
文摘A methodology for the selection of the optimal land uses of the reclamation of mined areas is proposed. It takes into consideration several multi-nature criteria and constraints, including spatial constrains related to the permissible land uses in certain parts of the mined area. The methodology combines desirability functions and evolution searching algorithms for selection of the optimal reclamation scheme. Its application for the reclamation planning of the Amynteon lignite surface mine in Greece indicated that it handles effectively spatial and non-spatial constraints and incorporates easily the decision-makers preferences regarding the reclamation strategy in the optimization procedure.
基金the Special Research Fund of Ghent University(BOF 01D23812 to Lien Taevernier and BOF O1J22510 to Evelien Wynendaele and Professor Bart De Spiegeleer)the Institute for the Promotion of Innovation through Science and Technology in Flanders(IWT 101529 to Matthias D'Hondt)for their financial funding
文摘The sample preparation of samples conlaining bovine serum albumin（BSA）,e.g..as used in transdermal Franz diffusion cell（FDC） solutions,was evaluated using an analytical qualily-by-design（QbD）approach.Traditional precipitation of BSA by adding an equal volume of organic solvent,often successfully used with conventional HPLC-PDA,was found insufficiently robust when novel fused-core HPLC and/or UPLC-MS methods were used.In this study,three factors（acetonitrile（%）.formic acid（%） and boiling time（min）） were included in the experimental design to determine an optimal and more suitable sample treatment of BSAcontaining FDC solutions.Using a QbD and Derringer desirability（D） approach,combining BSA loss,dilution factor and variability,we constructed an optimal working space with the edge of failure defined as D〈0.9.The design space is modelled and is confirmed to have an ACN range of 83 ± 3% and FA content of 1 ±0.25%.
基金This work is funded by the National Key Research and Development Program of China(Grant Nos.2018YFC1900603,2018YFC0604604).
文摘Tailings known as solid waste are generated by the mining industry.The development of tailings as wet shotcrete aggregates has significant economic and environmental benefits.The fine particle size of the tailings results in a large consumption of traditional cement as a cementitious material and insignificant improvement in strength.Therefore,a composite cementitious system of cement and solid waste resources(fly ash and slag powder)is explored for this study.In this paper,the response surface methodology(RSM)is used to optimize the experimental design and a multivariate nonlinear response model with cement,fly ash and slag powder contents as variables are constructed,which can investigate the effect of the composite cementitious system on the strength of tailing wet shotcrete(TWSC).In addition,the information entropy(IE)is introduced and combined with the RSM to evaluate the composite cementitious system.Finally,the desirability function(DF)combined with RSM is used to optimize the composite cementitious system.The results show that the response model constructed in this paper has R^(2)=0.96 and P-value<0.01(the test result of the model is P-value<0.01),which indicates that the model has high reliability.The higher the content of slag powder and cement in the composite cementitious system,the higher the strength and comprehensive score of the TWSC.There is a critical value of fly ash content,which makes the maximum cementation of the composite cementing system.The optimal mix proportion of the composite cementitious system is obtained based on RSM-DF,which leads to the strength of TWSC at different curing time to achieve the expected index.
文摘Purpose This work aims to study the increase in dead layer thickness of an HPGe N-type detector during its operational period from 2012 to 2018.Methods The dead layer was examined along three Ge-crystal surfaces,such as outer frontal,outer lateral,and inner lateral.These parameters were optimized using response surface methodology(RSM)with a Box–Behnken design(BBD).The Monte Carlo calculations using the GAMOS(Geant4-based Architecture for Medicine-Oriented Simulations)code were performed to evaluate the detector’s efficiency at different values of the inactive germanium layer.Results and conclusion The optimal combination of dead layer thickness has been identified using the desirability function approach,which is a useful tool to optimize multi-response problems.To find the variation in dead layer thickness over the operational period,the optimization procedure was reiterated for both experimental efficiencies measured in 2012 and 2018.The obtained results show that dead layers thickness has increased from 0.6141 mm to 0.7447 mm,0.0803 mm to 2.2721 mm,and 1.5012 mm to 1.6091 mm for the outer frontal,outer lateral,and inner lateral surfaces,respectively.
