Aiming to mitigate the aerodynamic lift force imbalance between pantograph strips,which exacerbates wear and affects the current collection performance of the pantograph-catenary system,a study has been conducted to s...Aiming to mitigate the aerodynamic lift force imbalance between pantograph strips,which exacerbates wear and affects the current collection performance of the pantograph-catenary system,a study has been conducted to support the beam deflector optimization using a combination of experimental measurements and computational fluid dynamics(CFD)simulations.The results demonstrate that the size,position,and installation orientation of the wind deflectors significantly influence the amount of force compensation.They also indicate that the front strip deflectors should be installed downwards and the rear strip deflectors upwards,thereby forming a“π”shape.Moreover,the lift force compensation provided by the wind deflectors increases with the size of the deflector.Alternative wind compensation strategies,such as control circuits,are also discussed,putting emphasis on the pros and cons of various pantograph types and wind compensation approaches.展开更多
Rigid barrier deflectors can effectively prevent overspilling landslides,and can satisfy disaster prevention requirements.However,the mechanisms of interaction between natural granular flow and rigid barrier deflector...Rigid barrier deflectors can effectively prevent overspilling landslides,and can satisfy disaster prevention requirements.However,the mechanisms of interaction between natural granular flow and rigid barrier deflectors require further investigation.To date,few studies have investigated the impact of deflectors on controlling viscous debris flows for geological disaster prevention.To investigate the effect of rigid barrier deflectors on impact mechanisms,a numerical model using the smoothed particle hydrodynamics(SPH)method with the Herschel–Bulkley model is proposed to simulate the interaction between natural viscous flow and single/dual barriers with and without deflectors.This model was validated using laboratory flume test data from the literature.Then,the model was used to investigate the influence of the deflector angle and multi-barrier arrangements.The optimal configuration of multi-barriers was analyzed with consideration to the barrier height and distance between the barriers,because these metrics have a significant impact on the viscous flow pile-up,run-up,and overflow mechanisms.The investigation considered the energy dissipation process,retention efficiency,and dead-zone formation.Compared with bare barriers with similar geometric characteristics and spatial distribution,rigid barriers with deflectors exhibit superior effectiveness in preventing the overflow and overspilling of viscous debris flow.Recommendations for the rational design of deflectors and the optimal arrangement of multi-barriers are provided to mitigate geological disasters.展开更多
A low-energy ion spectrometer(LEIS) for use aboard three-axis stabilized spacecraft has been developed to measure ion energy per charge distribution in three-dimensional space with good energy-, angular-and temporal-r...A low-energy ion spectrometer(LEIS) for use aboard three-axis stabilized spacecraft has been developed to measure ion energy per charge distribution in three-dimensional space with good energy-, angular-and temporal-resolutions. For the standard top-hat electrostatic analyzer used widely in space plasma detection, three-axis stabilized spacecraft makes it difficult to obtain complete coverage of all possible ion arrival directions. We have designed angular scanning deflectors supplementing to a cylindrically symmetric top-hat electrostatic analyzer to provide a half-space field of view as 360°×90°(–45°–+45°), and fabricated the LEIS flight model for detecting magnetospheric ions in geosynchronous orbit. The performance of this payload has been evaluated in detail by a series of simulation and environmental tests, and the payload has also been calibrated through laboratory experiments using a low-energy ion source. The results show that capabilities of the LEIS payload are in accordance with the requirements of a magnetospheric mission.展开更多
The cooling performance of air-cooled condenser(ACC)is susceptible to adverse impacts of ambient winds.In this work,three kinds of lateral double-layered deflectors installed under the ACC platform are proposed to wea...The cooling performance of air-cooled condenser(ACC)is susceptible to adverse impacts of ambient winds.In this work,three kinds of lateral double-layered deflectors installed under the ACC platform are proposed to weaken the unfavorable effects of cross winds.Through CFD simulation methods,the main parameters of thermo-flow performances of a 2×660 MW direct dry cooling system are obtained,by which it can be concluded that the deflectors can effectively reduce the inlet air temperatures while enhance the mass flow rates of upwind fans due to the guiding effect,especially at high wind speeds,while the improvement of cooling capacity of ACCs in the 0°wind direction is weak.The inclined-vertical deflectors are superior to others in performance improvement of ACCs for all cases,which can reduce the turbine back pressure by 12.15%when the wind speed is 12 m/s,so they can be applied to the performance enhancement of ACCs under windy conditions in practical engineering.展开更多
The purpose of the present study was to establish a passive flow control method for a rectangular jet using two types of deflectors installed symmetrically inside a nozzle. This deflector in a rectangular nozzle gener...The purpose of the present study was to establish a passive flow control method for a rectangular jet using two types of deflectors installed symmetrically inside a nozzle. This deflector in a rectangular nozzle generates the rectangular coaxial jets. The effect of the slant angle of the deflectors on the flow characteristics and the spread of the rectangular jet was investigated experimentally and by large-eddy simulation. The experiment and the numerical simulation were carried out at a Reynolds number of 9000. The rectangular jet with no deflectors generates a vortex ring from the nozzle exit. The vortex ring collapses in the downstream region and the outline of the jet changes from rectangular to diamond-shaped as a result of the axis-switching phenomenon. The rectangular jet with divergent and convergent deflectors shows particularly noticeable changes in the flow characteristics and vortical structures, as compared to the case with no deflectors. In the case of the rectangular jet with divergent deflectors (slant angle of <i style="font-family:" font-size:13.3333px;white-space:normal;"="">α</i><span style="font-family:" font-size:13.3333px;white-space:normal;"=""> = 6<span style="white-space:nowrap;">°</span>), minor axis spread is promoted more than major axis spread, and axis switching occurs closer to the nozzle exit than that in the case of no deflectors. The outline of the jet also changes from lateral rectangular to vertical rectangular as a result of axis switching. On the other hand, in the case of a rectangular jet with convergent deflectors (</span><i style="font-family:" font-size:13.3333px;white-space:normal;"="">α</i><span style="font-family:" font-size:13.3333px;white-space:normal;"=""> = -6<span style="white-space:nowrap;">°</span>), minor axis spread is suppressed more than major axis spread, and axis switching occurs farther from the nozzle exit than that in the case with no deflectors. The outline of the jet does not change until the downstream region. Therefore, the spread and the a展开更多
This paper studies the four-engine liquid rocket flow field during the launching phase.Using threedimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model,an impact model...This paper studies the four-engine liquid rocket flow field during the launching phase.Using threedimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model,an impact model is established and flow fields of plume impinging on the two different shapes of flame deflectors,including wedge-shaped flame deflector and cone-shaped flame deflector,are calculated.The finite-rate chemical kinetics is used to track chemical reactions.The simulation results show that afterburning mainly occurs in the mixed layer.And the region of peak pressure occurs directly under the rocket nozzle,which is the result of the direct impact of exhaust plume.Compared with the wedgeshaped flame deflector,the cone-shaped flame deflector has great performance on guiding exhaust gas.The wedge-shaped and cone-shaped flame deflectors guide the supersonic exhaust plume away from the impingement point with two directions and circumferential direction,respectively.The maximum pressure and temperature on the wedge-shaped flame deflector surface are 37.2%and 9.9%higher than those for the cone-shaped flame deflector.The results provide engineering guidance and theoretical significance for design in flame deflector of the launch platforms.展开更多
文摘Aiming to mitigate the aerodynamic lift force imbalance between pantograph strips,which exacerbates wear and affects the current collection performance of the pantograph-catenary system,a study has been conducted to support the beam deflector optimization using a combination of experimental measurements and computational fluid dynamics(CFD)simulations.The results demonstrate that the size,position,and installation orientation of the wind deflectors significantly influence the amount of force compensation.They also indicate that the front strip deflectors should be installed downwards and the rear strip deflectors upwards,thereby forming a“π”shape.Moreover,the lift force compensation provided by the wind deflectors increases with the size of the deflector.Alternative wind compensation strategies,such as control circuits,are also discussed,putting emphasis on the pros and cons of various pantograph types and wind compensation approaches.
基金supported by the National Natural Science Foundation of China(Grant Nos.42120104008 and 42207198).
文摘Rigid barrier deflectors can effectively prevent overspilling landslides,and can satisfy disaster prevention requirements.However,the mechanisms of interaction between natural granular flow and rigid barrier deflectors require further investigation.To date,few studies have investigated the impact of deflectors on controlling viscous debris flows for geological disaster prevention.To investigate the effect of rigid barrier deflectors on impact mechanisms,a numerical model using the smoothed particle hydrodynamics(SPH)method with the Herschel–Bulkley model is proposed to simulate the interaction between natural viscous flow and single/dual barriers with and without deflectors.This model was validated using laboratory flume test data from the literature.Then,the model was used to investigate the influence of the deflector angle and multi-barrier arrangements.The optimal configuration of multi-barriers was analyzed with consideration to the barrier height and distance between the barriers,because these metrics have a significant impact on the viscous flow pile-up,run-up,and overflow mechanisms.The investigation considered the energy dissipation process,retention efficiency,and dead-zone formation.Compared with bare barriers with similar geometric characteristics and spatial distribution,rigid barriers with deflectors exhibit superior effectiveness in preventing the overflow and overspilling of viscous debris flow.Recommendations for the rational design of deflectors and the optimal arrangement of multi-barriers are provided to mitigate geological disasters.
基金supported by the National Natural Science Foundation of China(Grant No.41327802)the CAS Key Research Program of Frontier Sciences(Grant No.QYZDB-SSW-DQC015)
文摘A low-energy ion spectrometer(LEIS) for use aboard three-axis stabilized spacecraft has been developed to measure ion energy per charge distribution in three-dimensional space with good energy-, angular-and temporal-resolutions. For the standard top-hat electrostatic analyzer used widely in space plasma detection, three-axis stabilized spacecraft makes it difficult to obtain complete coverage of all possible ion arrival directions. We have designed angular scanning deflectors supplementing to a cylindrically symmetric top-hat electrostatic analyzer to provide a half-space field of view as 360°×90°(–45°–+45°), and fabricated the LEIS flight model for detecting magnetospheric ions in geosynchronous orbit. The performance of this payload has been evaluated in detail by a series of simulation and environmental tests, and the payload has also been calibrated through laboratory experiments using a low-energy ion source. The results show that capabilities of the LEIS payload are in accordance with the requirements of a magnetospheric mission.
基金The National Natural Science Foundation of China(Grant No.51476055,51821004)the National Basic Research Program of China(Grant No.2015CB251503)the Fundamental Research Funds for the Central Universities(Grant No.2018QN036)are gratefully acknowledged for supporting this research.
文摘The cooling performance of air-cooled condenser(ACC)is susceptible to adverse impacts of ambient winds.In this work,three kinds of lateral double-layered deflectors installed under the ACC platform are proposed to weaken the unfavorable effects of cross winds.Through CFD simulation methods,the main parameters of thermo-flow performances of a 2×660 MW direct dry cooling system are obtained,by which it can be concluded that the deflectors can effectively reduce the inlet air temperatures while enhance the mass flow rates of upwind fans due to the guiding effect,especially at high wind speeds,while the improvement of cooling capacity of ACCs in the 0°wind direction is weak.The inclined-vertical deflectors are superior to others in performance improvement of ACCs for all cases,which can reduce the turbine back pressure by 12.15%when the wind speed is 12 m/s,so they can be applied to the performance enhancement of ACCs under windy conditions in practical engineering.
文摘The purpose of the present study was to establish a passive flow control method for a rectangular jet using two types of deflectors installed symmetrically inside a nozzle. This deflector in a rectangular nozzle generates the rectangular coaxial jets. The effect of the slant angle of the deflectors on the flow characteristics and the spread of the rectangular jet was investigated experimentally and by large-eddy simulation. The experiment and the numerical simulation were carried out at a Reynolds number of 9000. The rectangular jet with no deflectors generates a vortex ring from the nozzle exit. The vortex ring collapses in the downstream region and the outline of the jet changes from rectangular to diamond-shaped as a result of the axis-switching phenomenon. The rectangular jet with divergent and convergent deflectors shows particularly noticeable changes in the flow characteristics and vortical structures, as compared to the case with no deflectors. In the case of the rectangular jet with divergent deflectors (slant angle of <i style="font-family:" font-size:13.3333px;white-space:normal;"="">α</i><span style="font-family:" font-size:13.3333px;white-space:normal;"=""> = 6<span style="white-space:nowrap;">°</span>), minor axis spread is promoted more than major axis spread, and axis switching occurs closer to the nozzle exit than that in the case of no deflectors. The outline of the jet also changes from lateral rectangular to vertical rectangular as a result of axis switching. On the other hand, in the case of a rectangular jet with convergent deflectors (</span><i style="font-family:" font-size:13.3333px;white-space:normal;"="">α</i><span style="font-family:" font-size:13.3333px;white-space:normal;"=""> = -6<span style="white-space:nowrap;">°</span>), minor axis spread is suppressed more than major axis spread, and axis switching occurs farther from the nozzle exit than that in the case with no deflectors. The outline of the jet does not change until the downstream region. Therefore, the spread and the a
文摘This paper studies the four-engine liquid rocket flow field during the launching phase.Using threedimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model,an impact model is established and flow fields of plume impinging on the two different shapes of flame deflectors,including wedge-shaped flame deflector and cone-shaped flame deflector,are calculated.The finite-rate chemical kinetics is used to track chemical reactions.The simulation results show that afterburning mainly occurs in the mixed layer.And the region of peak pressure occurs directly under the rocket nozzle,which is the result of the direct impact of exhaust plume.Compared with the wedgeshaped flame deflector,the cone-shaped flame deflector has great performance on guiding exhaust gas.The wedge-shaped and cone-shaped flame deflectors guide the supersonic exhaust plume away from the impingement point with two directions and circumferential direction,respectively.The maximum pressure and temperature on the wedge-shaped flame deflector surface are 37.2%and 9.9%higher than those for the cone-shaped flame deflector.The results provide engineering guidance and theoretical significance for design in flame deflector of the launch platforms.
