Thermal spraying has emerged as a suitable and effective surface engineering technology and is widely used to apply wear, erosion and corrosion protective coatings for various kinds of industrial applications. Cr3C2-b...Thermal spraying has emerged as a suitable and effective surface engineering technology and is widely used to apply wear, erosion and corrosion protective coatings for various kinds of industrial applications. Cr3C2-based coatings have been applied to a wide range of industrial components. Cr3C2-NiCr coatings offer greater corrosion and oxidation resistance, also having a high melting point and maintaining high hardness, strength and wear resistance up to a maximum operating temperature of 900 °C. The corrosion resistance is provided by NiCr matrix while the wear resistance is mainly due to the carbide ceramic phase. This paper reviews the performance, developments and applications of Cr3C2-NiCr thermal spray coatings for corrosion/erosion-corrosion under different types of environments and outlines the characterization of Cr3C2-NiCr coatings with respect to their microstructure and mechanical properties, together with some brief characterisation work by the author for HVOF sprayed 75Cr3C2-25NiCr coating on T91 boiler steel.展开更多
Cr3 C2-NiCr particles were injected into the melted surface of Q235 low carbon steel to make a surface metal matrix composite （MMC） layer by gas tungsten are melt injection （GTAMI） process. Hardness of the surface...Cr3 C2-NiCr particles were injected into the melted surface of Q235 low carbon steel to make a surface metal matrix composite （MMC） layer by gas tungsten are melt injection （GTAMI） process. Hardness of the surface MMC layer was tested. Wear resistance of the surface MMC was investigated with a ball-on-disk dry sliding setup. Microstrnetures of the surface MMC layer and morphology of the worn surfaces were investigated with scanning electron microscopy （SEM）. The results showed that the hardness of the MMC was as high as 1 960. 7 HV. Wear loss of the upper part of the MMC layer is onlyO. 8% of that of the substrate under the dry sliding condition given. Wear loss of the bottom part is 2. 5 % of that of the substrate.展开更多
A Cr3C2-NiCr coating was prepared by high velocity oxy-fuel(HVOF)thermal spray on 1Cr18Ni9Ti stainless steel.Phases and microstructures of the coating were investigated by X-ray diffraction(XRD),optical microscopy(OM)...A Cr3C2-NiCr coating was prepared by high velocity oxy-fuel(HVOF)thermal spray on 1Cr18Ni9Ti stainless steel.Phases and microstructures of the coating were investigated by X-ray diffraction(XRD),optical microscopy(OM)and scanning election microscopy(SEM),respectively.The cavitation erosion resistance and silt erosion resistance of the coating were evaluated using a GB/T6383-2009 standard method in two experimental conditions(fresh water and water contained fine silt),compared with the coatings hydro machine material 1Cr18Ni9Ti stainless steel.The coating shows a layered structure and has a significantly higher microhardness(11.97 GPa)than that of the 1Cr18Ni9Ti stainless steel(2.1 GPa),which results in less mass losses both in cavitation erosion and silt erosion experiment.The HVOF coating has a predominant performance in the cavitation erosion and silt erosion resistance.The higher microhardness of the coating is the main cause which results in a less mass losses in the erosion experiments.And the mass loss usually happens at the edges of the pores.展开更多
During the operation of a coke dry quenching system of coking plant, wear-proofing cover of the boiler was seriously eroded, and even the ceiling tube of the boiler was worn and torn. Thus, attentions were paid to the...During the operation of a coke dry quenching system of coking plant, wear-proofing cover of the boiler was seriously eroded, and even the ceiling tube of the boiler was worn and torn. Thus, attentions were paid to the research, development and application of the wear-resistant coating spraying technique for wear-proofing cover of the coke dry quenching furnace. The Cr3C2–NiCr coatings for wear-proofing cover were fabricated via supersonic arc spraying process, and the residual coating of wear-proofing cover would be sampled for being analyzed after two years. The coating presents a dense microstructure with few pores and micro-cracks (the porosity is 4.65%). After thermal spraying of the wear-proofing cover, the hardness and the wear resistance of the surface are improved. The remaining coating is continuous and compact, with an average thickness of about 147μm. Transverse micro-cracks parallel to the spreading direction of the coating surface are displayed on different areas of the coating, which demonstrates its serious erosion wear effect. The main chemical component of white zone is Fe–18Cr–Ni. The Cr level of light gray phase is about 77.57 wt.% and the O level is 22.43 wt.%. And the main chemical components of dark gray phase are C, O, Al, Si and Ca. X-ray diffraction patterns were adopted to implement phase analysis on the surface of coating sample, which indicated that the coating was composed of a large amount of Cr3O2 and a small amount of metal Cr.展开更多
文摘Thermal spraying has emerged as a suitable and effective surface engineering technology and is widely used to apply wear, erosion and corrosion protective coatings for various kinds of industrial applications. Cr3C2-based coatings have been applied to a wide range of industrial components. Cr3C2-NiCr coatings offer greater corrosion and oxidation resistance, also having a high melting point and maintaining high hardness, strength and wear resistance up to a maximum operating temperature of 900 °C. The corrosion resistance is provided by NiCr matrix while the wear resistance is mainly due to the carbide ceramic phase. This paper reviews the performance, developments and applications of Cr3C2-NiCr thermal spray coatings for corrosion/erosion-corrosion under different types of environments and outlines the characterization of Cr3C2-NiCr coatings with respect to their microstructure and mechanical properties, together with some brief characterisation work by the author for HVOF sprayed 75Cr3C2-25NiCr coating on T91 boiler steel.
文摘Cr3 C2-NiCr particles were injected into the melted surface of Q235 low carbon steel to make a surface metal matrix composite （MMC） layer by gas tungsten are melt injection （GTAMI） process. Hardness of the surface MMC layer was tested. Wear resistance of the surface MMC was investigated with a ball-on-disk dry sliding setup. Microstrnetures of the surface MMC layer and morphology of the worn surfaces were investigated with scanning electron microscopy （SEM）. The results showed that the hardness of the MMC was as high as 1 960. 7 HV. Wear loss of the upper part of the MMC layer is onlyO. 8% of that of the substrate under the dry sliding condition given. Wear loss of the bottom part is 2. 5 % of that of the substrate.
文摘A Cr3C2-NiCr coating was prepared by high velocity oxy-fuel(HVOF)thermal spray on 1Cr18Ni9Ti stainless steel.Phases and microstructures of the coating were investigated by X-ray diffraction(XRD),optical microscopy(OM)and scanning election microscopy(SEM),respectively.The cavitation erosion resistance and silt erosion resistance of the coating were evaluated using a GB/T6383-2009 standard method in two experimental conditions(fresh water and water contained fine silt),compared with the coatings hydro machine material 1Cr18Ni9Ti stainless steel.The coating shows a layered structure and has a significantly higher microhardness(11.97 GPa)than that of the 1Cr18Ni9Ti stainless steel(2.1 GPa),which results in less mass losses both in cavitation erosion and silt erosion experiment.The HVOF coating has a predominant performance in the cavitation erosion and silt erosion resistance.The higher microhardness of the coating is the main cause which results in a less mass losses in the erosion experiments.And the mass loss usually happens at the edges of the pores.
基金the National Natural Science Foundation of China(Grant Nos.U1560101 and U1738I01)the National Key Research and Development Program of China(2016YFC0209302).
文摘During the operation of a coke dry quenching system of coking plant, wear-proofing cover of the boiler was seriously eroded, and even the ceiling tube of the boiler was worn and torn. Thus, attentions were paid to the research, development and application of the wear-resistant coating spraying technique for wear-proofing cover of the coke dry quenching furnace. The Cr3C2–NiCr coatings for wear-proofing cover were fabricated via supersonic arc spraying process, and the residual coating of wear-proofing cover would be sampled for being analyzed after two years. The coating presents a dense microstructure with few pores and micro-cracks (the porosity is 4.65%). After thermal spraying of the wear-proofing cover, the hardness and the wear resistance of the surface are improved. The remaining coating is continuous and compact, with an average thickness of about 147μm. Transverse micro-cracks parallel to the spreading direction of the coating surface are displayed on different areas of the coating, which demonstrates its serious erosion wear effect. The main chemical component of white zone is Fe–18Cr–Ni. The Cr level of light gray phase is about 77.57 wt.% and the O level is 22.43 wt.%. And the main chemical components of dark gray phase are C, O, Al, Si and Ca. X-ray diffraction patterns were adopted to implement phase analysis on the surface of coating sample, which indicated that the coating was composed of a large amount of Cr3O2 and a small amount of metal Cr.
