The conventional Arrhenius-type model was adopted to identify the deformation characteristic of Ti6 A14 V(TC4) titanium alloy based on the stress-strain curves of isothermal compression test. A new flow stress model b...The conventional Arrhenius-type model was adopted to identify the deformation characteristic of Ti6 A14 V(TC4) titanium alloy based on the stress-strain curves of isothermal compression test. A new flow stress model based on Arrhenius equation was proposed for TC4,which is composed of peak flow stress(PFS) prediction and strain compensation. The predicted PFS is set as a reference to derive the flow stress model at any strain ranging from approximately 0 to 0.7. The predictability and efficiency among the proposed model, conventional model,and an existing physical-based model of TC4 were comparatively evaluated. It is found that the newly proposed model can simultaneously track the hardening and softening behaviors of TC4 through a single expression while the other existing models are only valid in the softening region.Besides, the wider application range and acceptable accuracy of the new model have been achieved by fewer material constants with much-simplified modeling procedure than the other models.展开更多
The hot deformation behaviors of Ni18 Cr9 Co9 Fe5 Nb3 Mo superalloy were explored in the formation temperature range free ofγ’phase with various strain rates applied.The hot deformation behaviors are initially model...The hot deformation behaviors of Ni18 Cr9 Co9 Fe5 Nb3 Mo superalloy were explored in the formation temperature range free ofγ’phase with various strain rates applied.The hot deformation behaviors are initially modeled with Arrhenius equation which gives an average activation energy of 581.1 kJ mol^(-1).A modified Arrhenius approach,including the updated Zener-Hollomon parameter is proposed to consider the change of activation ene rgy under different deformation conditions which turns out a relatively accurate computation for activation energy of hot deformation,i.e.,the standard variance for modified model calculated in the covered deformation condition is just 35.4%of that for Arrhenius equation.The modified model also proposes a map for activation ene rgy which ranges from 571.5-589.0 kJ mol^(-1)for various deformation conditions.Microstructural features of the representative superalloy specimens were characterized by electron backscattered diffraction(EBSD)techniques in order to clarify the influence of activation energy on the microstructural formation.It is found that the Ni-based superalloy samples with higher activation energy are promoted by the degree of dynamic recrystallization which suggests that the rise in activation energy gives either a better recrystallization rate or finer grains.展开更多
The thermomechanical behavior of precipitation-hardened aluminum alloy AA7022-T6 was studied using isothermal compression at temperatures of 623−773 K and strain rates of 0.01−1 s^−1.The experimental results indicated...The thermomechanical behavior of precipitation-hardened aluminum alloy AA7022-T6 was studied using isothermal compression at temperatures of 623−773 K and strain rates of 0.01−1 s^−1.The experimental results indicated that dynamic recrystallization(DRX)is a predominant hot deformation mechanism,especially at elevated temperatures and low strain rates.The modified Johnson−Cook(J−C)and the strain compensated Arrhenius-type models were developed to predict the hot flow behavior under different deformation conditions.The correlation coefficients of modified J−C model and the strain compensated Arrhenius-type models were 0.9914 and 0.9972,respectively,their average relative errors(ARE)were 6.074%and 4.465%,respectively,and their root mean square errors(RMSE)were 10.611 and 1.665 MPa,respectively,indicating that the strain compensated Arrhenius-type model can predict the hot flow stress of AA7022-T6 aluminum alloy with an appropriate accuracy.展开更多
The hot compressive deformation behaviors of Cu-6wt.%Ag alloy were studied experimentally in the temperature range of 973.1123 K and the strain rate range of 0.01.10 s^-1.The stress increases and reaches the maximum v...The hot compressive deformation behaviors of Cu-6wt.%Ag alloy were studied experimentally in the temperature range of 973.1123 K and the strain rate range of 0.01.10 s^-1.The stress increases and reaches the maximum value when the true strain is very small,and then the stress changes slowly and tends to be stable under the action of work hardening,dynamic recovery and recrystallization.The material parameters of the conventional Arrhenius constitutive model are only related to strain under different deformation conditions,and the prediction error is large,which cannot accurately characterize the hot deformation behavior of the alloy.To describe the hot deformation behavior of the alloy accurately,a modified constitutive model was established by considering the simultaneous influence of forming temperature,strain rate and strain.The results indicate that correlation coefficient(R)and the average absolute relative error(AARE)are 0.993 and 4.2%,respectively.The modified constitutive model can accurately describe the hot deformation behavior of Cu-6wt.%Ag alloy.展开更多
基金financially supported by the National Natural Science Foundation of China (No. 51475295)
文摘The conventional Arrhenius-type model was adopted to identify the deformation characteristic of Ti6 A14 V(TC4) titanium alloy based on the stress-strain curves of isothermal compression test. A new flow stress model based on Arrhenius equation was proposed for TC4,which is composed of peak flow stress(PFS) prediction and strain compensation. The predicted PFS is set as a reference to derive the flow stress model at any strain ranging from approximately 0 to 0.7. The predictability and efficiency among the proposed model, conventional model,and an existing physical-based model of TC4 were comparatively evaluated. It is found that the newly proposed model can simultaneously track the hardening and softening behaviors of TC4 through a single expression while the other existing models are only valid in the softening region.Besides, the wider application range and acceptable accuracy of the new model have been achieved by fewer material constants with much-simplified modeling procedure than the other models.
基金financially supported by the National Natural Science Foundation of China(Nos.52034004 and 51975404)。
文摘The hot deformation behaviors of Ni18 Cr9 Co9 Fe5 Nb3 Mo superalloy were explored in the formation temperature range free ofγ’phase with various strain rates applied.The hot deformation behaviors are initially modeled with Arrhenius equation which gives an average activation energy of 581.1 kJ mol^(-1).A modified Arrhenius approach,including the updated Zener-Hollomon parameter is proposed to consider the change of activation ene rgy under different deformation conditions which turns out a relatively accurate computation for activation energy of hot deformation,i.e.,the standard variance for modified model calculated in the covered deformation condition is just 35.4%of that for Arrhenius equation.The modified model also proposes a map for activation ene rgy which ranges from 571.5-589.0 kJ mol^(-1)for various deformation conditions.Microstructural features of the representative superalloy specimens were characterized by electron backscattered diffraction(EBSD)techniques in order to clarify the influence of activation energy on the microstructural formation.It is found that the Ni-based superalloy samples with higher activation energy are promoted by the degree of dynamic recrystallization which suggests that the rise in activation energy gives either a better recrystallization rate or finer grains.
文摘The thermomechanical behavior of precipitation-hardened aluminum alloy AA7022-T6 was studied using isothermal compression at temperatures of 623−773 K and strain rates of 0.01−1 s^−1.The experimental results indicated that dynamic recrystallization(DRX)is a predominant hot deformation mechanism,especially at elevated temperatures and low strain rates.The modified Johnson−Cook(J−C)and the strain compensated Arrhenius-type models were developed to predict the hot flow behavior under different deformation conditions.The correlation coefficients of modified J−C model and the strain compensated Arrhenius-type models were 0.9914 and 0.9972,respectively,their average relative errors(ARE)were 6.074%and 4.465%,respectively,and their root mean square errors(RMSE)were 10.611 and 1.665 MPa,respectively,indicating that the strain compensated Arrhenius-type model can predict the hot flow stress of AA7022-T6 aluminum alloy with an appropriate accuracy.
基金Project(51675061)supported by the National Natural Science Foundation of China
文摘The hot compressive deformation behaviors of Cu-6wt.%Ag alloy were studied experimentally in the temperature range of 973.1123 K and the strain rate range of 0.01.10 s^-1.The stress increases and reaches the maximum value when the true strain is very small,and then the stress changes slowly and tends to be stable under the action of work hardening,dynamic recovery and recrystallization.The material parameters of the conventional Arrhenius constitutive model are only related to strain under different deformation conditions,and the prediction error is large,which cannot accurately characterize the hot deformation behavior of the alloy.To describe the hot deformation behavior of the alloy accurately,a modified constitutive model was established by considering the simultaneous influence of forming temperature,strain rate and strain.The results indicate that correlation coefficient(R)and the average absolute relative error(AARE)are 0.993 and 4.2%,respectively.The modified constitutive model can accurately describe the hot deformation behavior of Cu-6wt.%Ag alloy.
