Legged robots have better performance on discontinuous terrain than that of wheeled robots. However, the dynamic trotting and balance control of a quadruped robot is still a challenging problem, especially when the ro...Legged robots have better performance on discontinuous terrain than that of wheeled robots. However, the dynamic trotting and balance control of a quadruped robot is still a challenging problem, especially when the robot has multi-joint legs. This paper presents a three-dimensional model of a quadruped robot which has 6 Degrees of Freedom （DOF） on torso and 5 DOF on each leg. On the basis of the Spring-Loaded Inverted Pendulum （SLIP） model, body control algorithm is discussed in the first place to figure out how legs work in 3D trotting. Then, motivated by the principle of joint function separation and introducing certain biological characteristics, two joint coordination approaches are developed to produce the trot and provide balance. The robot reaches the highest speed of 2.0 m.s-1, and keeps balance under 250 Kg.m.s-1 lateral disturbance in the simulations. The effectiveness of these approaches is also verified on a prototype robot which runs to 0.83 m.s-1 on the treadmill, The simulations and experiments show that legged robots have good biological properties, such as the ground reaction force, and spring-like leg behavior.展开更多
This work presents a controller designed for position-controlled quadrupedal dynamic locomotion,aiming at simple and robust trotting control. The controller takes the torso attitude angles and velocities into planning...This work presents a controller designed for position-controlled quadrupedal dynamic locomotion,aiming at simple and robust trotting control. The controller takes the torso attitude angles and velocities into planning foot trajectories. Firstly design of the servo motor actuated quadruped robot is introduced and the kinematic equations are deduced. Then a scheme is presented for controlling the robot torso attitude based on the virtual leg model. Furthermore,it demonstrates the design of the controller which enables the robot to have a wide range of trotting gaits and omni-directional motions. Finally,results of robust trotting in various speeds,path tracking and push recovery in simulation are reported,and results of trotting on real quadruped robots will be studied.展开更多
A compliant landing strategy for a trotting quadruped robot on unknown rough terrains based on contact force control is presented. Firstly, in order to lower the disturbance caused by the landing impact force, a landi...A compliant landing strategy for a trotting quadruped robot on unknown rough terrains based on contact force control is presented. Firstly, in order to lower the disturbance caused by the landing impact force, a landing phase is added between the swing phase and the stance phase, where the desired contact force is set as a small positive constant. Secondly, the joint torque optimization of the stance legs is formulated as a quadratic programming(QP) problem subject to equality and inequality/bound constraints. And a primal-dual dynamical system solver based on linear variational inequalities(LVI) is applied to solve this QP problem. Furthermore, based on the optimization results, a hybrid motion/force robust controller is designed to realize the tracking of the contact force, while the constraints of the stance feet landing angles are fulfilled simultaneously. Finally, the experiments are performed to validate the proposed methods.展开更多
A prototype of hydraulically powered quadruped robot is presented. The aim of the research is to develop a versatile robot platform which could travel fleetly in outdoor terrain with long time of en- durance and high ...A prototype of hydraulically powered quadruped robot is presented. The aim of the research is to develop a versatile robot platform which could travel fleetly in outdoor terrain with long time of en- durance and high load carrying ability. The current version is 1. lm long and 0.48m wide, and weights about 150kg. Each leg has four rotational joints driven by hydraulic cylinders and one pas- sive translational joint with spring. The torso carries the control system and the power system. A no- vel control algorithm is developed based on a Spring-Loaded Inverted Pendulum model and the prin- ciple of joint function separation. The robot can not only cross a 150mm high obstacle in static gait and trot at 2.5km/h and l km/h on the level-ground and 10°sloped-terrain respectively, but also au- tomatically keep balanced under lateral disturbance. In this paper, the mechanical structure and control systems are also discussed. Simulations and experiments are carried out to validate the design and algorithms.展开更多
基金Acknowledgment This work was supported by the National Hi-tech Research and Development Program of China （863 Program, Grant No. 2011AA040701）, and the National Natural Science Foundation of China （No. 61375097, No. 61175107）
文摘Legged robots have better performance on discontinuous terrain than that of wheeled robots. However, the dynamic trotting and balance control of a quadruped robot is still a challenging problem, especially when the robot has multi-joint legs. This paper presents a three-dimensional model of a quadruped robot which has 6 Degrees of Freedom （DOF） on torso and 5 DOF on each leg. On the basis of the Spring-Loaded Inverted Pendulum （SLIP） model, body control algorithm is discussed in the first place to figure out how legs work in 3D trotting. Then, motivated by the principle of joint function separation and introducing certain biological characteristics, two joint coordination approaches are developed to produce the trot and provide balance. The robot reaches the highest speed of 2.0 m.s-1, and keeps balance under 250 Kg.m.s-1 lateral disturbance in the simulations. The effectiveness of these approaches is also verified on a prototype robot which runs to 0.83 m.s-1 on the treadmill, The simulations and experiments show that legged robots have good biological properties, such as the ground reaction force, and spring-like leg behavior.
基金Supported by the National Natural Science Foundation of China(No.61233014,61305130)China Postdoctoral Science Foundation(No.2013M541912)the Shandong Provincial Natural Science Foundation(No.ZR2013FQ003,ZR2013EEM027)
文摘This work presents a controller designed for position-controlled quadrupedal dynamic locomotion,aiming at simple and robust trotting control. The controller takes the torso attitude angles and velocities into planning foot trajectories. Firstly design of the servo motor actuated quadruped robot is introduced and the kinematic equations are deduced. Then a scheme is presented for controlling the robot torso attitude based on the virtual leg model. Furthermore,it demonstrates the design of the controller which enables the robot to have a wide range of trotting gaits and omni-directional motions. Finally,results of robust trotting in various speeds,path tracking and push recovery in simulation are reported,and results of trotting on real quadruped robots will be studied.
基金Project(61473304)supported by the National Natural Science Foundation of ChinaProject(2015AA042202)supported by Hi-tech Research and Development Program of China
文摘A compliant landing strategy for a trotting quadruped robot on unknown rough terrains based on contact force control is presented. Firstly, in order to lower the disturbance caused by the landing impact force, a landing phase is added between the swing phase and the stance phase, where the desired contact force is set as a small positive constant. Secondly, the joint torque optimization of the stance legs is formulated as a quadratic programming(QP) problem subject to equality and inequality/bound constraints. And a primal-dual dynamical system solver based on linear variational inequalities(LVI) is applied to solve this QP problem. Furthermore, based on the optimization results, a hybrid motion/force robust controller is designed to realize the tracking of the contact force, while the constraints of the stance feet landing angles are fulfilled simultaneously. Finally, the experiments are performed to validate the proposed methods.
基金Supported by the National High Technology Research and Development Programme of China(No.2011AA040701)
文摘A prototype of hydraulically powered quadruped robot is presented. The aim of the research is to develop a versatile robot platform which could travel fleetly in outdoor terrain with long time of en- durance and high load carrying ability. The current version is 1. lm long and 0.48m wide, and weights about 150kg. Each leg has four rotational joints driven by hydraulic cylinders and one pas- sive translational joint with spring. The torso carries the control system and the power system. A no- vel control algorithm is developed based on a Spring-Loaded Inverted Pendulum model and the prin- ciple of joint function separation. The robot can not only cross a 150mm high obstacle in static gait and trot at 2.5km/h and l km/h on the level-ground and 10°sloped-terrain respectively, but also au- tomatically keep balanced under lateral disturbance. In this paper, the mechanical structure and control systems are also discussed. Simulations and experiments are carried out to validate the design and algorithms.
