Starting from Witten’s eleven dimensional M-theory, the present work develops in an analogous way a corresponding dimensional fractal version where . Subsequently, the new fractal formalism is utilized to determine t...Starting from Witten’s eleven dimensional M-theory, the present work develops in an analogous way a corresponding dimensional fractal version where . Subsequently, the new fractal formalism is utilized to determine the measured ordinary energy density of the cosmos which turns out to be intimately linked to the new theory’s fractal dimension via non-integer irrational Lorentzian-like factor: where is Hardy’s probability of quantum entanglement. Consequently, the energy density is found from a limiting classical kinetic energy to be Here, is ‘tHooft’s renormalon of dimensional regularization. The immediate logical, mathematical and physical implication of this result is that the dark energy density of the cosmos must be in astounding agreement with cosmic measurements and observations.展开更多
The present paper is basically written as a non-apologetic strong defence of the thesis that computation is part and parcel of a physical theory and by no means a mere numerical evaluation of the prediction of a theor...The present paper is basically written as a non-apologetic strong defence of the thesis that computation is part and parcel of a physical theory and by no means a mere numerical evaluation of the prediction of a theory which comes towards the end. Various general considerations as well as specific examples are given to illustrate and support our arguments. These examples range from the practical aspect to almost esoteric considerations but at the end, everything converges towards a unity of theory and computation presented in the form of modern fractal logic and transfinite quantum field theory in a Cantorian spacetime. It is true that all our examples are taken from physics but our discussion is applicable in equal measure to a much wider aspect of life.展开更多
Quality and robustness of grid deformation is of the most importance in the field of aircraft design, and grid in high quality is essential for improving the precision of numerical simulation. In order to maintain the...Quality and robustness of grid deformation is of the most importance in the field of aircraft design, and grid in high quality is essential for improving the precision of numerical simulation. In order to maintain the orthogonality of deformed grid, the displacement of grid points is divided into rotational and translational parts in this paper, and inverse distance weighted interpolation is used to transfer the changing location from boundary grid to the spatial grid. Moreover, the deformation of rotational part is implemented in combination with the exponential space mapping that improves the certainty and stability of quaternion interpolation. Furthermore, the new grid deformation technique named ‘‘layering blend deformation＇＇ is built based on the basic quaternion technique, which combines the layering arithmetic with transfinite interpolation（TFI） technique. Then the proposed technique is applied in the movement of airfoil, parametric modeling, and the deformation of complex configuration, in which the robustness of grid quality is tested. The results show that the new method has the capacity to deal with the problems with large deformation, and the ‘‘layering blend deformation＇＇ improves the efficiency and quality of the basic quaternion deformation method significantly.展开更多
Aiming at a complex multi-block structured grid,an efficient dynamic mesh generation method is presented in this paper,which is based on radial basis functions(RBFs)and transfinite interpolation(TFI).When the object i...Aiming at a complex multi-block structured grid,an efficient dynamic mesh generation method is presented in this paper,which is based on radial basis functions(RBFs)and transfinite interpolation(TFI).When the object is moving,the multi-block structured grid would be changed.The fast mesh deformation is critical for numerical simulation.In this work,the dynamic mesh deformation is completed in two steps.At first,we select all block vertexes with known deformation as center points,and apply RBFs interpolation to get the grid deformation on block edges.Then,an arc-lengthbased TFI is employed to efficiently calculate the grid deformation on block faces and inside each block.The present approach can be well applied to both two-dimensional(2D)and three-dimensional(3D)problems.Numerical results show that the dynamic meshes for all test cases can be generated in an accurate and efficient manner.展开更多
The quintessence of hyperbolic geometry is transferred to a transfinite Cantorian-fractal setting in the present work. Starting from the building block of E-infinity Cantorian spacetime theory, namely a quantum pre-pa...The quintessence of hyperbolic geometry is transferred to a transfinite Cantorian-fractal setting in the present work. Starting from the building block of E-infinity Cantorian spacetime theory, namely a quantum pre-particle zero set as a core and a quantum pre-wave empty set as cobordism or surface of the core, we connect the interaction of two such self similar units to a compact four dimensional manifold and a corresponding holographic boundary akin to the compactified Klein modular curve with SL(2,7) symmetry. Based on this model in conjunction with a 4D compact hy- perbolic manifold M(4) and the associated general theory, the so obtained ordinary and dark en- ergy density of the cosmos is found to be in complete agreement with previous analysis as well as cosmic measurements and observations such as WMAP and Type 1a supernova.展开更多
The paper suggests that quantum relativistic gravity (QRG) is basically a higher dimensionality (HD) simulating relativity and non-classical effects plus a fractal Cantorian spacetime geometry (FG) simulating quantum ...The paper suggests that quantum relativistic gravity (QRG) is basically a higher dimensionality (HD) simulating relativity and non-classical effects plus a fractal Cantorian spacetime geometry (FG) simulating quantum mechanics. This more than just a conceptual equation is illustrated by integer approximation and an exact solution of the dark energy density behind cosmic expansion.展开更多
The well known finite elements Regge calculus is transformed to a triangulation in the hyperbolic plane using fractal Rindler wedges as tiling elements. The final result is an expanding de Sitter hyperbolic, i.e. Gaus...The well known finite elements Regge calculus is transformed to a triangulation in the hyperbolic plane using fractal Rindler wedges as tiling elements. The final result is an expanding de Sitter hyperbolic, i.e. Gauss-Bolyai-Lobachevsky universe with dark energy and ordinary energy densities in full agreement with cosmic observations and measurements. In the course of obtaining this vital result, the work addresses fundamental points connected to a host of subjects, namely Hardy’s quantum entanglement, an extension of Turing’s machine to a transfinite version, the phenomenon of measure concentration in the context of Banach-like spaces with high dimensionality as well as the pioneering work on the relation between quantum entanglement and computational efficiency.展开更多
In this paper,a sufficient condition is given under which the smash product A#H is a transfinite left.free normalizing extension of an algebra A.Moreover,the result is applied to a skew semigroup ring,a skew group rin...In this paper,a sufficient condition is given under which the smash product A#H is a transfinite left.free normalizing extension of an algebra A.Moreover,the result is applied to a skew semigroup ring,a skew group ring and the quantum group U_q(sl(2))such that some properties are shown.展开更多
Using von Neumann’s continuous geometry in conjunction with A. Connes’ noncommutative geometry an exact mathematical-topological picture of quantum spacetime is developed ab initio. The final result coincides with t...Using von Neumann’s continuous geometry in conjunction with A. Connes’ noncommutative geometry an exact mathematical-topological picture of quantum spacetime is developed ab initio. The final result coincides with the general conclusion of E-infinity theory and previous results obtained in the realm of high energy physics. In particular it is concluded that the quantum particle and the quantum wave spans quantum spacetime and conversely quantum particles and waves mutates from quantum spacetime.展开更多
A black hole is essentially a relativistic as well as a quantum object. Therefore the information paradox of black holes is a consequence of the clash between these two most fundamental theories of modern physics. It ...A black hole is essentially a relativistic as well as a quantum object. Therefore the information paradox of black holes is a consequence of the clash between these two most fundamental theories of modern physics. It is logical to conclude that a resolution of the problem requires some form of a quantum gravity theory. The present work proposes such a resolution using set theory and pointless spacetime geometry.展开更多
We show that Einstein’s famous formula E = mc2 is actually the sum of two quantum parts, namely E = mc2/22 of the quantum particle and E = mc2 (21/22) of the quantum wave. We use first Magueijo-Smolin’s VSL theory t...We show that Einstein’s famous formula E = mc2 is actually the sum of two quantum parts, namely E = mc2/22 of the quantum particle and E = mc2 (21/22) of the quantum wave. We use first Magueijo-Smolin’s VSL theory to derive the relevant equation and then validate our results using ’tHooft-Veltman’s dimensional regularization. All in all our result confirms the COBE, WMAP, Planck and super nova cosmic measurements with astonishing precision.展开更多
The increasing grid data in CFD simulation has brought some new difficulties and challenges,such as high storage cost,low transmission efficiency.In order to overcome these problems,a novel method for compressing and ...The increasing grid data in CFD simulation has brought some new difficulties and challenges,such as high storage cost,low transmission efficiency.In order to overcome these problems,a novel method for compressing and saving the structured grid are proposed.In the present method,the geometric coordinates of the six logical domains of one grid block is saved instead of all grid vertex coordinates to reduce the size of the structured grid file when the grid is compressed.And all grid vertex coordinates are recovered from the compressed data with the use of the transfinite interpolation algorithm when the grid is decompressed.Firstly,single-block grid cases with different edge vertexes are tested to investigate the compression effect.The test results show that a higher compression ratio will be obtained on a larger grid.Secondly,further theoretical analysis is carried out to investigate the effects of parameters on grid compression.The analysis on single-block grid compression shows that the compression ratio is proportionate to the cubic root of the number of total vertexes.The highest compression ratio of single-block grid is obtained when the numbers of vertexes in three logical directions are equal.The analysis on multi-block grid compression shows that a higher compression ratio will be obtained when a larger difference of total vertexes number exists among the grid blocks.Finally,multi-blockgrids of two industrial aircraft configurations are compressed to validate the method.The compression results demonstrate that the present method has an excellent ability on structured grid compression.For a million-vertex structured grid,more than 80 percent disk space can be saved after compression.展开更多
In this paper,a common characteristic of real number system and well ordered set is revealed and proved to be an equivalent form of the Dedekind Axiom or the Continuous Induction in R. Basing on it,we get the unif...In this paper,a common characteristic of real number system and well ordered set is revealed and proved to be an equivalent form of the Dedekind Axiom or the Continuous Induction in R. Basing on it,we get the unified form of the mathematical induction,the transfinite induction and the continuous induction and generalize induction to totally ordered set that has the same characteristic.展开更多
文摘Starting from Witten’s eleven dimensional M-theory, the present work develops in an analogous way a corresponding dimensional fractal version where . Subsequently, the new fractal formalism is utilized to determine the measured ordinary energy density of the cosmos which turns out to be intimately linked to the new theory’s fractal dimension via non-integer irrational Lorentzian-like factor: where is Hardy’s probability of quantum entanglement. Consequently, the energy density is found from a limiting classical kinetic energy to be Here, is ‘tHooft’s renormalon of dimensional regularization. The immediate logical, mathematical and physical implication of this result is that the dark energy density of the cosmos must be in astounding agreement with cosmic measurements and observations.
文摘The present paper is basically written as a non-apologetic strong defence of the thesis that computation is part and parcel of a physical theory and by no means a mere numerical evaluation of the prediction of a theory which comes towards the end. Various general considerations as well as specific examples are given to illustrate and support our arguments. These examples range from the practical aspect to almost esoteric considerations but at the end, everything converges towards a unity of theory and computation presented in the form of modern fractal logic and transfinite quantum field theory in a Cantorian spacetime. It is true that all our examples are taken from physics but our discussion is applicable in equal measure to a much wider aspect of life.
文摘Quality and robustness of grid deformation is of the most importance in the field of aircraft design, and grid in high quality is essential for improving the precision of numerical simulation. In order to maintain the orthogonality of deformed grid, the displacement of grid points is divided into rotational and translational parts in this paper, and inverse distance weighted interpolation is used to transfer the changing location from boundary grid to the spatial grid. Moreover, the deformation of rotational part is implemented in combination with the exponential space mapping that improves the certainty and stability of quaternion interpolation. Furthermore, the new grid deformation technique named ‘‘layering blend deformation＇＇ is built based on the basic quaternion technique, which combines the layering arithmetic with transfinite interpolation（TFI） technique. Then the proposed technique is applied in the movement of airfoil, parametric modeling, and the deformation of complex configuration, in which the robustness of grid quality is tested. The results show that the new method has the capacity to deal with the problems with large deformation, and the ‘‘layering blend deformation＇＇ improves the efficiency and quality of the basic quaternion deformation method significantly.
基金the National Natural Science Foundation of China(Grant No.11372135)the National Basic Research Program of China(”973”Project)(Grant No.2014CB046200)the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘Aiming at a complex multi-block structured grid,an efficient dynamic mesh generation method is presented in this paper,which is based on radial basis functions(RBFs)and transfinite interpolation(TFI).When the object is moving,the multi-block structured grid would be changed.The fast mesh deformation is critical for numerical simulation.In this work,the dynamic mesh deformation is completed in two steps.At first,we select all block vertexes with known deformation as center points,and apply RBFs interpolation to get the grid deformation on block edges.Then,an arc-lengthbased TFI is employed to efficiently calculate the grid deformation on block faces and inside each block.The present approach can be well applied to both two-dimensional(2D)and three-dimensional(3D)problems.Numerical results show that the dynamic meshes for all test cases can be generated in an accurate and efficient manner.
文摘The quintessence of hyperbolic geometry is transferred to a transfinite Cantorian-fractal setting in the present work. Starting from the building block of E-infinity Cantorian spacetime theory, namely a quantum pre-particle zero set as a core and a quantum pre-wave empty set as cobordism or surface of the core, we connect the interaction of two such self similar units to a compact four dimensional manifold and a corresponding holographic boundary akin to the compactified Klein modular curve with SL(2,7) symmetry. Based on this model in conjunction with a 4D compact hy- perbolic manifold M(4) and the associated general theory, the so obtained ordinary and dark en- ergy density of the cosmos is found to be in complete agreement with previous analysis as well as cosmic measurements and observations such as WMAP and Type 1a supernova.
文摘The paper suggests that quantum relativistic gravity (QRG) is basically a higher dimensionality (HD) simulating relativity and non-classical effects plus a fractal Cantorian spacetime geometry (FG) simulating quantum mechanics. This more than just a conceptual equation is illustrated by integer approximation and an exact solution of the dark energy density behind cosmic expansion.
文摘The well known finite elements Regge calculus is transformed to a triangulation in the hyperbolic plane using fractal Rindler wedges as tiling elements. The final result is an expanding de Sitter hyperbolic, i.e. Gauss-Bolyai-Lobachevsky universe with dark energy and ordinary energy densities in full agreement with cosmic observations and measurements. In the course of obtaining this vital result, the work addresses fundamental points connected to a host of subjects, namely Hardy’s quantum entanglement, an extension of Turing’s machine to a transfinite version, the phenomenon of measure concentration in the context of Banach-like spaces with high dimensionality as well as the pioneering work on the relation between quantum entanglement and computational efficiency.
基金Project (19501007) supported by the National Natural Science Foundation of China
文摘In this paper,a sufficient condition is given under which the smash product A#H is a transfinite left.free normalizing extension of an algebra A.Moreover,the result is applied to a skew semigroup ring,a skew group ring and the quantum group U_q(sl(2))such that some properties are shown.
文摘Using von Neumann’s continuous geometry in conjunction with A. Connes’ noncommutative geometry an exact mathematical-topological picture of quantum spacetime is developed ab initio. The final result coincides with the general conclusion of E-infinity theory and previous results obtained in the realm of high energy physics. In particular it is concluded that the quantum particle and the quantum wave spans quantum spacetime and conversely quantum particles and waves mutates from quantum spacetime.
文摘A black hole is essentially a relativistic as well as a quantum object. Therefore the information paradox of black holes is a consequence of the clash between these two most fundamental theories of modern physics. It is logical to conclude that a resolution of the problem requires some form of a quantum gravity theory. The present work proposes such a resolution using set theory and pointless spacetime geometry.
文摘We show that Einstein’s famous formula E = mc2 is actually the sum of two quantum parts, namely E = mc2/22 of the quantum particle and E = mc2 (21/22) of the quantum wave. We use first Magueijo-Smolin’s VSL theory to derive the relevant equation and then validate our results using ’tHooft-Veltman’s dimensional regularization. All in all our result confirms the COBE, WMAP, Planck and super nova cosmic measurements with astonishing precision.
基金supported by the National Numerical Windtunnel Project, China
文摘The increasing grid data in CFD simulation has brought some new difficulties and challenges,such as high storage cost,low transmission efficiency.In order to overcome these problems,a novel method for compressing and saving the structured grid are proposed.In the present method,the geometric coordinates of the six logical domains of one grid block is saved instead of all grid vertex coordinates to reduce the size of the structured grid file when the grid is compressed.And all grid vertex coordinates are recovered from the compressed data with the use of the transfinite interpolation algorithm when the grid is decompressed.Firstly,single-block grid cases with different edge vertexes are tested to investigate the compression effect.The test results show that a higher compression ratio will be obtained on a larger grid.Secondly,further theoretical analysis is carried out to investigate the effects of parameters on grid compression.The analysis on single-block grid compression shows that the compression ratio is proportionate to the cubic root of the number of total vertexes.The highest compression ratio of single-block grid is obtained when the numbers of vertexes in three logical directions are equal.The analysis on multi-block grid compression shows that a higher compression ratio will be obtained when a larger difference of total vertexes number exists among the grid blocks.Finally,multi-blockgrids of two industrial aircraft configurations are compressed to validate the method.The compression results demonstrate that the present method has an excellent ability on structured grid compression.For a million-vertex structured grid,more than 80 percent disk space can be saved after compression.
文摘In this paper,a common characteristic of real number system and well ordered set is revealed and proved to be an equivalent form of the Dedekind Axiom or the Continuous Induction in R. Basing on it,we get the unified form of the mathematical induction,the transfinite induction and the continuous induction and generalize induction to totally ordered set that has the same characteristic.
