Recently, we found that side lobes of wavelets have a large impact on the identification of thin sand reservoirs when studying some gas fields in a basin in Northwest China. Reflections from the top of the H Formation...Recently, we found that side lobes of wavelets have a large impact on the identification of thin sand reservoirs when studying some gas fields in a basin in Northwest China. Reflections from the top of the H Formation, in which there are gas-bearing thin sand bodies, have the main wavelet lobe between two weak peak side lobes. The lower one always mixes with another peak reflected from the top of a thin sand reservoir. That makes it difficult to identify the sand reservoir. In order to solve this, many forward models were set up using typical well logs. 2D synthetic profiles were produced using Ricker wavelets to study the relationships between the effects of wavelet side lobes and thin sand position and frequency and between amplitude and the thin sand body. We developed the following conclusions： First, it is easier to identify thin sands in a shallower position. Second, a good way to tell sand body reflections from side lobes is by comparing profiles with different frequency windows. Third, it is helpful and effective to describe sand extent using amplitude attributes.展开更多
In this paper,a thin cloud removal method was put forward based on the linear relationships between the thin cloud reflectance in the channels from 0.4 μm to 1.0 μm and 1.38 μm.Channels of 0.66 μm,0.86 μm and 1....In this paper,a thin cloud removal method was put forward based on the linear relationships between the thin cloud reflectance in the channels from 0.4 μm to 1.0 μm and 1.38 μm.Channels of 0.66 μm,0.86 μm and 1.38 μm were chosen to extract the water body information under the thin cloud.Two study cases were selected to validate the thin cloud removal method.One case was applied with the Earth Observation System Moderate Resolution Imaging Spectroradiometer(EOS/MODIS) data,and the other with the Medium Resolution Spectral Imager(MERSI) and Visible and Infrared Radiometer(VIRR) data from Fengyun-3A(FY-3A).The test results showed that thin cloud removal method did not change the reflectivity of the ground surface under the clear sky.To the area contaminated by the thin cloud,the reflectance decreased to be closer to the reference reflectance under the clear sky after the thin cloud removal.The spatial distribution of the water body area could not be extracted before the thin cloud removal,while water information could be easily identified by using proper near infrared channel threshold after removing the thin cloud.The thin cloud removal method could improve the image quality and water body extraction precision effectively.展开更多
Simulation method is used to provide a guideline f or ultra thin body(UTB) MOSFET designs.Three important parameters of the UTB MOS FE T,i.e.the raised S/D height,Ge mole fraction of the Ge xSi 1-x gate,and the ...Simulation method is used to provide a guideline f or ultra thin body(UTB) MOSFET designs.Three important parameters of the UTB MOS FE T,i.e.the raised S/D height,Ge mole fraction of the Ge xSi 1-x gate,and the silic on body thickness,are comprehensively analyzed and optimized.The optimal region of feasible Ge mole fraction and the silicon body thickness for low operating po wer device are given.As the simulation results show that through changing Ge mole fraction coupl ed with the silicon body thickness tuning,UTB device with good performance can b e obtained.展开更多
Purposes:This study explores the impact of the influence mechanism of social media on female college students’body dissatisfaction in China and the neglected factors which are not involved in the dominating theoretic...Purposes:This study explores the impact of the influence mechanism of social media on female college students’body dissatisfaction in China and the neglected factors which are not involved in the dominating theoretical framework in this field.Methods:The study adopts a qualitative,in-depth interview method.Semi-structured interviews were conducted with 25 female college students who were concerned about their weight and figures in an attempt to understand their social media use and their perceptions of their body shapes.Findings:Internalization of the thin-ideal,perceived discrepancy,and appearance comparison moderate the relationship between social media use and female college students’body dissatisfaction.Participants exposed to social media tend to internalize the thin-ideal,perceive a discrepancy between their actual body shape and the thin-ideal,and make appearance comparisons,particularly with their peers;subsequently,these students experience body dissatisfaction.Conclusions:The ideal image of thinness that is promoted and diffused by social media creates a strict standard for females.Female college students are likely to suffer from body dissatisfaction the more they consume certain types of social media.Due to the interactive and virtual quality of social networking platforms,peers play a unique role in the influence mechanism,which is not present in traditional forms of mass media.展开更多
文摘Recently, we found that side lobes of wavelets have a large impact on the identification of thin sand reservoirs when studying some gas fields in a basin in Northwest China. Reflections from the top of the H Formation, in which there are gas-bearing thin sand bodies, have the main wavelet lobe between two weak peak side lobes. The lower one always mixes with another peak reflected from the top of a thin sand reservoir. That makes it difficult to identify the sand reservoir. In order to solve this, many forward models were set up using typical well logs. 2D synthetic profiles were produced using Ricker wavelets to study the relationships between the effects of wavelet side lobes and thin sand position and frequency and between amplitude and the thin sand body. We developed the following conclusions： First, it is easier to identify thin sands in a shallower position. Second, a good way to tell sand body reflections from side lobes is by comparing profiles with different frequency windows. Third, it is helpful and effective to describe sand extent using amplitude attributes.
基金Under the auspices of National Nature Science Foundation of China(No.40901231,41101517)
文摘In this paper,a thin cloud removal method was put forward based on the linear relationships between the thin cloud reflectance in the channels from 0.4 μm to 1.0 μm and 1.38 μm.Channels of 0.66 μm,0.86 μm and 1.38 μm were chosen to extract the water body information under the thin cloud.Two study cases were selected to validate the thin cloud removal method.One case was applied with the Earth Observation System Moderate Resolution Imaging Spectroradiometer(EOS/MODIS) data,and the other with the Medium Resolution Spectral Imager(MERSI) and Visible and Infrared Radiometer(VIRR) data from Fengyun-3A(FY-3A).The test results showed that thin cloud removal method did not change the reflectivity of the ground surface under the clear sky.To the area contaminated by the thin cloud,the reflectance decreased to be closer to the reference reflectance under the clear sky after the thin cloud removal.The spatial distribution of the water body area could not be extracted before the thin cloud removal,while water information could be easily identified by using proper near infrared channel threshold after removing the thin cloud.The thin cloud removal method could improve the image quality and water body extraction precision effectively.
文摘Simulation method is used to provide a guideline f or ultra thin body(UTB) MOSFET designs.Three important parameters of the UTB MOS FE T,i.e.the raised S/D height,Ge mole fraction of the Ge xSi 1-x gate,and the silic on body thickness,are comprehensively analyzed and optimized.The optimal region of feasible Ge mole fraction and the silicon body thickness for low operating po wer device are given.As the simulation results show that through changing Ge mole fraction coupl ed with the silicon body thickness tuning,UTB device with good performance can b e obtained.
文摘Purposes:This study explores the impact of the influence mechanism of social media on female college students’body dissatisfaction in China and the neglected factors which are not involved in the dominating theoretical framework in this field.Methods:The study adopts a qualitative,in-depth interview method.Semi-structured interviews were conducted with 25 female college students who were concerned about their weight and figures in an attempt to understand their social media use and their perceptions of their body shapes.Findings:Internalization of the thin-ideal,perceived discrepancy,and appearance comparison moderate the relationship between social media use and female college students’body dissatisfaction.Participants exposed to social media tend to internalize the thin-ideal,perceive a discrepancy between their actual body shape and the thin-ideal,and make appearance comparisons,particularly with their peers;subsequently,these students experience body dissatisfaction.Conclusions:The ideal image of thinness that is promoted and diffused by social media creates a strict standard for females.Female college students are likely to suffer from body dissatisfaction the more they consume certain types of social media.Due to the interactive and virtual quality of social networking platforms,peers play a unique role in the influence mechanism,which is not present in traditional forms of mass media.
