Developing realistic soil carbon （C） sequestration strategies for China＇s sustainable agriculture relies on accurate estimates of the amount, retention and turnover rates of C stored in paddy soils. Available C est...Developing realistic soil carbon （C） sequestration strategies for China＇s sustainable agriculture relies on accurate estimates of the amount, retention and turnover rates of C stored in paddy soils. Available C estimates to date are predominantly for the tilled and flood-irrigated surface topsoil （ca. 30 cm）. Such estimates cannot be used to extrapolate to soil depths of 100 cm since soil organic carbon （SOC） generally shows a sharp decrease with depth. In this research, composite soil samples were collected at several depths to 100 cm from three representative paddy soils in the Taihu Lake region, China. Soil organic carbon distribution in the profiles and in aggregate-size fractions was determined. Results showed that while SOC decreased exponentially with depth to 100 cm, a substantial proportion of the total SOC （30%-40%） is stored below the 30 cm depth. In the carbon-enriched paddy topsoils, SOC was found to accumulate preferentially in the 2-0.25 and 0.25-0.02 mm aggregate size fractions. δ^13C analysis of the coarse micro-aggregate fraction showed that the high degree of C stratification in the paddy topsoil was in agreement with the occurrence of lighter δ^1313C in the upper 30 cm depth. These results suggest that SOC stratification within profiles varies with different pedogenetical types of paddy soils with regards to clay and iron oxyhydrates distributions. Sand-sized fractions of aggregates in paddy soil systems may play a very important role in carbon sequestration and turnover, dissimilar to other studied agricultural systems.展开更多
Nanostructured CeO_2-ZrO_2 materials are an irreplaceable constituent in catalytic systems for automobile exhaust purification due to their unique oxygen storage capacity(OSC). However, traditional CeO_2-ZrO_2 materia...Nanostructured CeO_2-ZrO_2 materials are an irreplaceable constituent in catalytic systems for automobile exhaust purification due to their unique oxygen storage capacity(OSC). However, traditional CeO_2-ZrO_2 materials are easy to sinter at high temperature, which causes a sharp decrease of OSC. In this paper,La^(3+) , Nd^(3+) and Y^(3+) are chosen as dopants for CeO_2-ZrO_2 to improve anti-sintering and OSC properties.The Ce_(0.17) Zr_(0.73) La_(0.02) Nd_(0.04) Y_(0.04) O_2 powders(CZLNY) were prepared by co-precipitation method. The effects of grain sizes with different mixed chlorinated solution concentrations on performances were investigated. X-ray diffraction(XRD) and transmission electron micrograph(TEM) were performed to calculate the grain sizes of CZLNY. The specific surfaces, OSC and redox properties were investigated by N_2 adsorption/desorption and temperature programmed reduction(H2-TPR). The results show that introducing La^(3+) , Nd^(3+) and Y^(3+) into CeO_2-ZrO_2 lattice can improve the stability of phase structure and anti-sintering ability. Moreover, low concentration of mixed chlorinated solution remarkably improves structural and textural properties of CZLNY. Relatively large fresh grain exhibits superior thermal stability and OSC under the condition of being calcined at 800℃ for 3 h. The specific surface and OSC are42.37 m^2/g and 333.13 mmol/g after calcining at 1000℃ for 10 h, respectively. This is owing to the low sintered driving force of large grain and long-range migration energy of large pores during the sintering process, which are beneficial to the stability of structure in CZLNY materials.展开更多
Potassium-ion batteries(PIBs)are considered promising alternatives to lithium-ion batteries owing to cost-effective potassium resources and a suitable redox potential of-2.93 V(vs.-3.04 V for Li+/Li).However,the explo...Potassium-ion batteries(PIBs)are considered promising alternatives to lithium-ion batteries owing to cost-effective potassium resources and a suitable redox potential of-2.93 V(vs.-3.04 V for Li+/Li).However,the exploration of appro-priate electrode materials with the correct size for reversibly accommodating large K+ions presents a significant challenge.In addition,the reaction mecha-nisms and origins of enhanced performance remain elusive.Here,tetragonal FeSe nanoflakes of different sizes are designed to serve as an anode for PIBs,and their live and atomic-scale potassiation/depotassiation mechanisms are revealed for the first time through in situ high-resolution transmission electron micros-copy.We found that FeSe undergoes two distinct structural evolutions,sequen-tially characterized by intercalation and conversion reactions,and the initial intercalation behavior is size-dependent.Apparent expansion induced by the intercalation of K+ions is observed in small-sized FeSe nanoflakes,whereas unexpected cracks are formed along the direction of ionic diffusion in large-sized nanoflakes.The significant stress generation and crack extension originating from the combined effect of mechanical and electrochemical interactions are elucidated by geometric phase analysis and finite-element analysis.Despite the different intercalation behaviors,the formed products of Fe and K_(2)Se after full potassiation can be converted back into the original FeSe phase upon depotassiation.In particular,small-sized nanoflakes exhibit better cycling perfor-mance with well-maintained structural integrity.This article presents the first successful demonstration of atomic-scale visualization that can reveal size-dependent potassiation dynamics.Moreover,it provides valuable guidelines for optimizing the dimensions of electrode materials for advanced PIBs.展开更多
It has been well known that doping nano-scale catalysts can significantly improve both the kinetics and reversible hydrogen storage capacity of MgH_(2) . However, so far it is still a challenge to directly synthesize ...It has been well known that doping nano-scale catalysts can significantly improve both the kinetics and reversible hydrogen storage capacity of MgH_(2) . However, so far it is still a challenge to directly synthesize ultrafine catalysts(e.g., < 5 nm), mainly because of the complicated chemical reaction processes. Here, a facile one-step high-energy ball milling process is developed to in situ form ultrafine Ni nanoparticles from the nickel acetylacetonate precursor in the MgH_(2) matrix. With the combined action of ultrafine metallic Ni and expanded graphite(EG), the formed MgH_(2)-Ni-EG nanocomposite with the optimized doping amounts of Ni and EG can still release 7.03 wt.% H_(2) within 8.5 min at 300 ℃ after 10 cycles. At a temperature close to room temperature(50 ℃), it can also absorb 2.42 wt.% H_(2) within 1 h. It can be confirmed from the microstructural characterization analysis that the in situ formed ultrafine metallic Ni is transformed into Mg_(2)Ni/Mg_(2)NiH_4 in the subsequent hydrogen absorption and desorption cycles. It is calculated that the dehydrogenation activation energy of the MgH_(2)-Ni-EG nanocomposite is also reduced obviously in comparison with the pure MgH_(2) . Our work provides a methodology to significantly improve the hydrogen storage performance of MgH_(2) by combining the in situ formed and uniformly dispersed ultrafine metallic catalyst from the precursor and EG.展开更多
Alpha-lipoic acid-loaded lipid nanoparticles(ALA-LNs) were prepared by high pressure homogenization method.The influences of storage conditions such as time and temperature on the physical and chemical storage stabili...Alpha-lipoic acid-loaded lipid nanoparticles(ALA-LNs) were prepared by high pressure homogenization method.The influences of storage conditions such as time and temperature on the physical and chemical storage stability of ALA-LNs were studied in details.The stability was evaluated by particle size and polydispersity index,morphology of ALA-LNs,and capacity of ALA loading.The dilution and pH stability of ALA-LNs suspensions were also studied.After three months storage,the mean size of ALA-LNs at 4 and 40 ℃ was increased by 2.68% and 3.62% compared with the original size,respectively.ALA-LNs stored at 40 ℃ had ellipsoid shape and the mean size was about 152 nm(SD=23.6).The loading capacity of ALA at 40 ℃ was much higher than those stored at other two temperatures.The good dilution and pH stability were also demonstrated.The sample had good fluidity even at 4 ℃.展开更多
文摘Developing realistic soil carbon （C） sequestration strategies for China＇s sustainable agriculture relies on accurate estimates of the amount, retention and turnover rates of C stored in paddy soils. Available C estimates to date are predominantly for the tilled and flood-irrigated surface topsoil （ca. 30 cm）. Such estimates cannot be used to extrapolate to soil depths of 100 cm since soil organic carbon （SOC） generally shows a sharp decrease with depth. In this research, composite soil samples were collected at several depths to 100 cm from three representative paddy soils in the Taihu Lake region, China. Soil organic carbon distribution in the profiles and in aggregate-size fractions was determined. Results showed that while SOC decreased exponentially with depth to 100 cm, a substantial proportion of the total SOC （30%-40%） is stored below the 30 cm depth. In the carbon-enriched paddy topsoils, SOC was found to accumulate preferentially in the 2-0.25 and 0.25-0.02 mm aggregate size fractions. δ^13C analysis of the coarse micro-aggregate fraction showed that the high degree of C stratification in the paddy topsoil was in agreement with the occurrence of lighter δ^1313C in the upper 30 cm depth. These results suggest that SOC stratification within profiles varies with different pedogenetical types of paddy soils with regards to clay and iron oxyhydrates distributions. Sand-sized fractions of aggregates in paddy soil systems may play a very important role in carbon sequestration and turnover, dissimilar to other studied agricultural systems.
基金Project supported by the National Key Research and Development Program(2017YFC0211002)
文摘Nanostructured CeO_2-ZrO_2 materials are an irreplaceable constituent in catalytic systems for automobile exhaust purification due to their unique oxygen storage capacity(OSC). However, traditional CeO_2-ZrO_2 materials are easy to sinter at high temperature, which causes a sharp decrease of OSC. In this paper,La^(3+) , Nd^(3+) and Y^(3+) are chosen as dopants for CeO_2-ZrO_2 to improve anti-sintering and OSC properties.The Ce_(0.17) Zr_(0.73) La_(0.02) Nd_(0.04) Y_(0.04) O_2 powders(CZLNY) were prepared by co-precipitation method. The effects of grain sizes with different mixed chlorinated solution concentrations on performances were investigated. X-ray diffraction(XRD) and transmission electron micrograph(TEM) were performed to calculate the grain sizes of CZLNY. The specific surfaces, OSC and redox properties were investigated by N_2 adsorption/desorption and temperature programmed reduction(H2-TPR). The results show that introducing La^(3+) , Nd^(3+) and Y^(3+) into CeO_2-ZrO_2 lattice can improve the stability of phase structure and anti-sintering ability. Moreover, low concentration of mixed chlorinated solution remarkably improves structural and textural properties of CZLNY. Relatively large fresh grain exhibits superior thermal stability and OSC under the condition of being calcined at 800℃ for 3 h. The specific surface and OSC are42.37 m^2/g and 333.13 mmol/g after calcining at 1000℃ for 10 h, respectively. This is owing to the low sintered driving force of large grain and long-range migration energy of large pores during the sintering process, which are beneficial to the stability of structure in CZLNY materials.
基金This work was supported by the National Key R&D Program of China(Grant No.2018YFB1304902)the National Natural Science Foundation of China(Grant Nos.12004034,U1813211,22005247,11904372,51502007,52072323,52122211,12174019,and 51972058)+1 种基金the Gen-eral Research Fund of Hong Kong(Project No.11217221)China Postdoctoral Science Foundation Funded Project(Grant No.2021M690386).
文摘Potassium-ion batteries(PIBs)are considered promising alternatives to lithium-ion batteries owing to cost-effective potassium resources and a suitable redox potential of-2.93 V(vs.-3.04 V for Li+/Li).However,the exploration of appro-priate electrode materials with the correct size for reversibly accommodating large K+ions presents a significant challenge.In addition,the reaction mecha-nisms and origins of enhanced performance remain elusive.Here,tetragonal FeSe nanoflakes of different sizes are designed to serve as an anode for PIBs,and their live and atomic-scale potassiation/depotassiation mechanisms are revealed for the first time through in situ high-resolution transmission electron micros-copy.We found that FeSe undergoes two distinct structural evolutions,sequen-tially characterized by intercalation and conversion reactions,and the initial intercalation behavior is size-dependent.Apparent expansion induced by the intercalation of K+ions is observed in small-sized FeSe nanoflakes,whereas unexpected cracks are formed along the direction of ionic diffusion in large-sized nanoflakes.The significant stress generation and crack extension originating from the combined effect of mechanical and electrochemical interactions are elucidated by geometric phase analysis and finite-element analysis.Despite the different intercalation behaviors,the formed products of Fe and K_(2)Se after full potassiation can be converted back into the original FeSe phase upon depotassiation.In particular,small-sized nanoflakes exhibit better cycling perfor-mance with well-maintained structural integrity.This article presents the first successful demonstration of atomic-scale visualization that can reveal size-dependent potassiation dynamics.Moreover,it provides valuable guidelines for optimizing the dimensions of electrode materials for advanced PIBs.
基金financial support from the National Basic Research Program of China (2018YFB1502100)the support from the PolyU grant (No.G-YW5N)。
文摘It has been well known that doping nano-scale catalysts can significantly improve both the kinetics and reversible hydrogen storage capacity of MgH_(2) . However, so far it is still a challenge to directly synthesize ultrafine catalysts(e.g., < 5 nm), mainly because of the complicated chemical reaction processes. Here, a facile one-step high-energy ball milling process is developed to in situ form ultrafine Ni nanoparticles from the nickel acetylacetonate precursor in the MgH_(2) matrix. With the combined action of ultrafine metallic Ni and expanded graphite(EG), the formed MgH_(2)-Ni-EG nanocomposite with the optimized doping amounts of Ni and EG can still release 7.03 wt.% H_(2) within 8.5 min at 300 ℃ after 10 cycles. At a temperature close to room temperature(50 ℃), it can also absorb 2.42 wt.% H_(2) within 1 h. It can be confirmed from the microstructural characterization analysis that the in situ formed ultrafine metallic Ni is transformed into Mg_(2)Ni/Mg_(2)NiH_4 in the subsequent hydrogen absorption and desorption cycles. It is calculated that the dehydrogenation activation energy of the MgH_(2)-Ni-EG nanocomposite is also reduced obviously in comparison with the pure MgH_(2) . Our work provides a methodology to significantly improve the hydrogen storage performance of MgH_(2) by combining the in situ formed and uniformly dispersed ultrafine metallic catalyst from the precursor and EG.
基金Supported by International Scientific Cooperation Project of China (No.2008DFB50060)Suzhou Innovation Funds of High-Tech Enterprise (No.SG0958)
文摘Alpha-lipoic acid-loaded lipid nanoparticles(ALA-LNs) were prepared by high pressure homogenization method.The influences of storage conditions such as time and temperature on the physical and chemical storage stability of ALA-LNs were studied in details.The stability was evaluated by particle size and polydispersity index,morphology of ALA-LNs,and capacity of ALA loading.The dilution and pH stability of ALA-LNs suspensions were also studied.After three months storage,the mean size of ALA-LNs at 4 and 40 ℃ was increased by 2.68% and 3.62% compared with the original size,respectively.ALA-LNs stored at 40 ℃ had ellipsoid shape and the mean size was about 152 nm(SD=23.6).The loading capacity of ALA at 40 ℃ was much higher than those stored at other two temperatures.The good dilution and pH stability were also demonstrated.The sample had good fluidity even at 4 ℃.
