The effects of journal misalignment on a journal bearing caused by an asymmetric rotor structure are presented in this study.A new model considering the asymmetric deflection is applied.Also,the thermo-hydrodynamic of...The effects of journal misalignment on a journal bearing caused by an asymmetric rotor structure are presented in this study.A new model considering the asymmetric deflection is applied.Also,the thermo-hydrodynamic of the oil film in the journal bearing and straightforward elasticity theory are considered in the analysis.Based on the structure stiffness equivalent characteristic,a simple stepped shaft can reflect the entire complex structure model.The existing lubrication model,which does not consider this angle component,is not very precise for journal bearings.Film pressure,misalignment angle,velocity field,oil leakage,and temperature field were calculated and compared in the journal bearing analysis.The results indicate that bearing performances are greatly affected by misalignment caused by the asymmetric structure.A simple stepped shaft can effectively represent a misaligned journal bearing in a rotor-bearing system.展开更多
This study systematically introduces the development of the world’s first full-link and full-system ground demonstration and verification system for the OMEGA space solar power satellite(SSPS).First,the OMEGA 2.0 inn...This study systematically introduces the development of the world’s first full-link and full-system ground demonstration and verification system for the OMEGA space solar power satellite(SSPS).First,the OMEGA 2.0 innovation design was proposed.Second,field-coupling theoretical models of sunlight concentration,photoelectric conversion,and transmitting antennas were established,and a systematic optimization design method was proposed.Third,a beam waveform optimization methodology considering both a high beam collection efficiency and a circular stepped beam shape was proposed.Fourth,a control strategy was developed to control the condenser pointing toward the sun while maintaining the transmitting antenna toward the rectenna.Fifth,a high-efficiency heat radiator design method based on bionics and topology optimization was proposed.Sixth,a method for improving the rectenna array’s reception,rectification,and direct current(DC)power synthesis efficiencies is presented.Seventh,high-precision measurement technology for high-accuracy beam-pointing control was developed.Eighth,a smart mechanical structure was designed and developed.Finally,the developed SSPS ground demonstration and verification system has the capacity for sun tracking,a high concentration ratio,photoelectric conversion,microwave conversion and emission,microwave reception,and rectification,and thus satisfactory results were obtained.展开更多
The valence band offset between Cs_(2)AgBiBr_(6)and hole transport layer(HTL)is approximately 1.00 e V,which results in high energy loss and is identified as one of the bottle necks of Cs_(2)Ag BiBr_(6)perovskite sola...The valence band offset between Cs_(2)AgBiBr_(6)and hole transport layer(HTL)is approximately 1.00 e V,which results in high energy loss and is identified as one of the bottle necks of Cs_(2)Ag BiBr_(6)perovskite solar cell(PSC)for achieving high power conversion efficiency(PCE).To tackle this problem,we propose the optimization of the energy level alignment by designing and synthesizing novel deep-level hole transport materials(HTMs).The sole introduction of deep-level HTMs successfully reduces the valence band offset between Cs_(2)Ag Bi Br_(6)and HTL,but induces the increased valence band offset at HTL/Au interface,limiting the PCE improvement.To further solve the problem and improve the PCE,the gradient energy level arrangement is constructed by combining the newly developed deep-level HTM 6,6’-(3-((9,9-dimethyl-9H-fluoren-3-yl)(4-methoxyphenyl)amino)thiophene-2,5-diyl)bis(N-(9,9-dimethyl-9H-fluoren-2-yl)-N,9-bis(4-methoxyphenyl)-9H-carbazol-3-amine)(TF)with 2,2’,7,7’-tetrakis(N,N’-dipmethoxyphenylamine)-9,9-spirobifluorene(Spiro-OMeTAD).Through optimization,an impressive PCE of 3.50%with remarkably high open-circuit voltage(V_(oc))and fill factor(FF)is achieved,qualifying it among the best pristine Cs_(2)AgBiBr_(6)PSCs.展开更多
为了实现微悬臂梁传感器的自驱动自感知功能,设计了嵌套式阶梯结构微悬臂梁传感器。采用有限元分析的方法对其微梁的自由端弯曲位移和固有频率进行了仿真,研究了阶梯结构对微悬臂梁传感器性能的改善,确定了微悬臂梁传感器的阶梯结构参...为了实现微悬臂梁传感器的自驱动自感知功能,设计了嵌套式阶梯结构微悬臂梁传感器。采用有限元分析的方法对其微梁的自由端弯曲位移和固有频率进行了仿真,研究了阶梯结构对微悬臂梁传感器性能的改善,确定了微悬臂梁传感器的阶梯结构参数。结果表明,经优化设计后的微梁传感器,微悬臂梁自由端弯曲位移可达566 nm,提高了2倍;固有频率可达385 k Hz,提高了1. 45倍。阶梯式微梁的成功设计为传感器的集成与小型化奠定了基础。展开更多
基于传统阶跃阻抗滤波器,提出了一种易于实现的超宽阻带微带低通滤波器改进设计方案。低阻抗线部分采用扇形微带结构,在同等阶数下,该结构的滤波器与传统阶跃阻抗滤波器相比,具有更紧凑的电路结构以及更好的阻带特性。在滤波器末端并联...基于传统阶跃阻抗滤波器,提出了一种易于实现的超宽阻带微带低通滤波器改进设计方案。低阻抗线部分采用扇形微带结构,在同等阶数下,该结构的滤波器与传统阶跃阻抗滤波器相比,具有更紧凑的电路结构以及更好的阻带特性。在滤波器末端并联开路短截线,使得阻带增加额外传输陷波点来抑制寄生通带。利用ADS和HFSS仿真软件对滤波器结构进行优化设计,并进行了实物的加工和测试。实测结果表明,通带3 d B截止频率为2 GHz,通带内0～1.8 GHz回波损耗大于20 d B,3～20 GHz频率范围内的阻带抑制能达到25 d B以上。展开更多
基金Project supported by the National Natural Science Foundation of China (No. 60879002)the Tianjin Support Plan of China(No. 10ZCKFGX03800)
文摘The effects of journal misalignment on a journal bearing caused by an asymmetric rotor structure are presented in this study.A new model considering the asymmetric deflection is applied.Also,the thermo-hydrodynamic of the oil film in the journal bearing and straightforward elasticity theory are considered in the analysis.Based on the structure stiffness equivalent characteristic,a simple stepped shaft can reflect the entire complex structure model.The existing lubrication model,which does not consider this angle component,is not very precise for journal bearings.Film pressure,misalignment angle,velocity field,oil leakage,and temperature field were calculated and compared in the journal bearing analysis.The results indicate that bearing performances are greatly affected by misalignment caused by the asymmetric structure.A simple stepped shaft can effectively represent a misaligned journal bearing in a rotor-bearing system.
文摘This study systematically introduces the development of the world’s first full-link and full-system ground demonstration and verification system for the OMEGA space solar power satellite(SSPS).First,the OMEGA 2.0 innovation design was proposed.Second,field-coupling theoretical models of sunlight concentration,photoelectric conversion,and transmitting antennas were established,and a systematic optimization design method was proposed.Third,a beam waveform optimization methodology considering both a high beam collection efficiency and a circular stepped beam shape was proposed.Fourth,a control strategy was developed to control the condenser pointing toward the sun while maintaining the transmitting antenna toward the rectenna.Fifth,a high-efficiency heat radiator design method based on bionics and topology optimization was proposed.Sixth,a method for improving the rectenna array’s reception,rectification,and direct current(DC)power synthesis efficiencies is presented.Seventh,high-precision measurement technology for high-accuracy beam-pointing control was developed.Eighth,a smart mechanical structure was designed and developed.Finally,the developed SSPS ground demonstration and verification system has the capacity for sun tracking,a high concentration ratio,photoelectric conversion,microwave conversion and emission,microwave reception,and rectification,and thus satisfactory results were obtained.
基金financially supported by the National Natural Science Foundation of China(Nos.22179053,22279046 and 21905119)the Natural Science Excellent Youth Foundation of Jiangsu Provincial(No.BK20220112)+1 种基金the Open Competition Mechanism Project of Carbon Neutrality of Jiangsu Province(No.BE2022026)Zhejiang Province Selected Funding for Postdoctoral Research Projects(No.ZJ2021001)for financial support。
文摘The valence band offset between Cs_(2)AgBiBr_(6)and hole transport layer(HTL)is approximately 1.00 e V,which results in high energy loss and is identified as one of the bottle necks of Cs_(2)Ag BiBr_(6)perovskite solar cell(PSC)for achieving high power conversion efficiency(PCE).To tackle this problem,we propose the optimization of the energy level alignment by designing and synthesizing novel deep-level hole transport materials(HTMs).The sole introduction of deep-level HTMs successfully reduces the valence band offset between Cs_(2)Ag Bi Br_(6)and HTL,but induces the increased valence band offset at HTL/Au interface,limiting the PCE improvement.To further solve the problem and improve the PCE,the gradient energy level arrangement is constructed by combining the newly developed deep-level HTM 6,6’-(3-((9,9-dimethyl-9H-fluoren-3-yl)(4-methoxyphenyl)amino)thiophene-2,5-diyl)bis(N-(9,9-dimethyl-9H-fluoren-2-yl)-N,9-bis(4-methoxyphenyl)-9H-carbazol-3-amine)(TF)with 2,2’,7,7’-tetrakis(N,N’-dipmethoxyphenylamine)-9,9-spirobifluorene(Spiro-OMeTAD).Through optimization,an impressive PCE of 3.50%with remarkably high open-circuit voltage(V_(oc))and fill factor(FF)is achieved,qualifying it among the best pristine Cs_(2)AgBiBr_(6)PSCs.
文摘为了实现微悬臂梁传感器的自驱动自感知功能,设计了嵌套式阶梯结构微悬臂梁传感器。采用有限元分析的方法对其微梁的自由端弯曲位移和固有频率进行了仿真,研究了阶梯结构对微悬臂梁传感器性能的改善,确定了微悬臂梁传感器的阶梯结构参数。结果表明,经优化设计后的微梁传感器,微悬臂梁自由端弯曲位移可达566 nm,提高了2倍;固有频率可达385 k Hz,提高了1. 45倍。阶梯式微梁的成功设计为传感器的集成与小型化奠定了基础。
文摘基于传统阶跃阻抗滤波器,提出了一种易于实现的超宽阻带微带低通滤波器改进设计方案。低阻抗线部分采用扇形微带结构,在同等阶数下,该结构的滤波器与传统阶跃阻抗滤波器相比,具有更紧凑的电路结构以及更好的阻带特性。在滤波器末端并联开路短截线,使得阻带增加额外传输陷波点来抑制寄生通带。利用ADS和HFSS仿真软件对滤波器结构进行优化设计,并进行了实物的加工和测试。实测结果表明,通带3 d B截止频率为2 GHz,通带内0～1.8 GHz回波损耗大于20 d B,3～20 GHz频率范围内的阻带抑制能达到25 d B以上。
