The deformation, damage and failure behaviors of 17 vol.% SiCp/2009AI composite were studied by micro- scopic finite element （FE） models based on a representative volume element （RVE） and a unit cell. The RVE havi...The deformation, damage and failure behaviors of 17 vol.% SiCp/2009AI composite were studied by micro- scopic finite element （FE） models based on a representative volume element （RVE） and a unit cell. The RVE having a 3D realistic microstructure was constructed via computational modeling technique, in which an interface phase with an average thickness of 50 nm was generated for assessing the effects of interracial properties. Modeling results showed that the RVE based FE model was more accurate than the unit cell based one. Based on the RVE, the predicted stress-strain curve and the fracture morphology agreed well with the experimental results. Furthermore, lower interface strength resulted in lower flow stress and ductile damage of interface phase, thereby leading to decreased elongation. It was revealed that the stress concentration factor of SiC was -2.0： the average stress in SiC particles reached -1200 MPa, while that of the composite reached -600 MPa.展开更多
金属-复合材料混合接头广泛存在于航空、船舶及汽车等领域,具有凹槽形貌的共固化金属-复合材料接头可保持复合材料结构的完整性和纤维的连续性。在被连接金属表面设计了±45°凹槽,评估了表面形貌对钢-玻璃纤维增强树脂复合材料...金属-复合材料混合接头广泛存在于航空、船舶及汽车等领域,具有凹槽形貌的共固化金属-复合材料接头可保持复合材料结构的完整性和纤维的连续性。在被连接金属表面设计了±45°凹槽,评估了表面形貌对钢-玻璃纤维增强树脂复合材料(GFRP)接头胶接性能的影响,设计了单搭接拉伸剪切试验,验证胶接接头的剪切性能;在模拟中引入随机Weibull分布,定义内聚单元材料参数,结合矢量化用户材料(Vectorized user material,VUMAT)子程序模拟了接头的渐进失效过程,并建立±45°凹槽结构的代表性体积单元(Representative volume element,RVE)模型,分析了凹槽宽度和深度等参数对胶接接头的性能影响。研究表明,±45°凹槽结构可以显著提高钢-GFRP胶接接头的剪切强度,数值模拟强度和破坏模式与试验吻合;凹槽深度和宽度对结构胶接性能的影响显著,本文可为金属-复合材料接头的设计提供参考。展开更多
基金supported financially by the National Key R&D Program of China(No.2017YFB0703104)the National Natural Science Foundation of China(Nos.51671191 and 51401219)
文摘The deformation, damage and failure behaviors of 17 vol.% SiCp/2009AI composite were studied by micro- scopic finite element （FE） models based on a representative volume element （RVE） and a unit cell. The RVE having a 3D realistic microstructure was constructed via computational modeling technique, in which an interface phase with an average thickness of 50 nm was generated for assessing the effects of interracial properties. Modeling results showed that the RVE based FE model was more accurate than the unit cell based one. Based on the RVE, the predicted stress-strain curve and the fracture morphology agreed well with the experimental results. Furthermore, lower interface strength resulted in lower flow stress and ductile damage of interface phase, thereby leading to decreased elongation. It was revealed that the stress concentration factor of SiC was -2.0： the average stress in SiC particles reached -1200 MPa, while that of the composite reached -600 MPa.
文摘金属-复合材料混合接头广泛存在于航空、船舶及汽车等领域,具有凹槽形貌的共固化金属-复合材料接头可保持复合材料结构的完整性和纤维的连续性。在被连接金属表面设计了±45°凹槽,评估了表面形貌对钢-玻璃纤维增强树脂复合材料(GFRP)接头胶接性能的影响,设计了单搭接拉伸剪切试验,验证胶接接头的剪切性能;在模拟中引入随机Weibull分布,定义内聚单元材料参数,结合矢量化用户材料(Vectorized user material,VUMAT)子程序模拟了接头的渐进失效过程,并建立±45°凹槽结构的代表性体积单元(Representative volume element,RVE)模型,分析了凹槽宽度和深度等参数对胶接接头的性能影响。研究表明,±45°凹槽结构可以显著提高钢-GFRP胶接接头的剪切强度,数值模拟强度和破坏模式与试验吻合;凹槽深度和宽度对结构胶接性能的影响显著,本文可为金属-复合材料接头的设计提供参考。
