Guided by the theoretical prediction,a new MAX phase V2SnC was synthesized experimentally for the first time by reaction of V,Sn,and C mixtures at 1000°C.The chemical composition and crystal structure of this new...Guided by the theoretical prediction,a new MAX phase V2SnC was synthesized experimentally for the first time by reaction of V,Sn,and C mixtures at 1000°C.The chemical composition and crystal structure of this new compound were identified by the cross-check combination of first-principles calculations,X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDS),and high resolution scanning transmission electron microscopy(HR-STEM).The stacking sequence of V2C and Sn layers results in a crystal structure of space group P63/mmc.The a-and c-lattice parameters,which were determined by the Rietveld analysis of powder XRD pattern,are 0.2981(0)nm and 1.3470(6)nm,respectively.The atomic positions are V at 4f(1/3,2/3,0.0776(5)),Sn at 2d(2/3,1/3,1/4),and C at 2a(0,0,0).A new set of XRD data of V2SnC was also obtained.Theoretical calculations suggest that this new compound is stable with negative formation energy and formation enthalpy,satisfied Born-Huang criteria of mechanical stability,and positive phonon branches over the Brillouin zone.It also has low shear deformation resistance c44(second-order elastic constant,cij)and shear modulus(G),positive Cauchy pressure,and low Pugh’s ratio(G/B=0.500<0.571),which is regarded as a quasi-ductile MAX phase.The mechanism underpinning the quasi-ductility is associated with the presence of a metallic bond.展开更多
A compound controller is proposed to alleviate the considerable chattering in output of zero phase error tracking controller （ZPETC）, when the flight simulator losses command data of simulation signal. Besides, the ...A compound controller is proposed to alleviate the considerable chattering in output of zero phase error tracking controller （ZPETC）, when the flight simulator losses command data of simulation signal. Besides, the shortcomings, caused by conventional differential methods in retrieving velocity and acceleration signals, are avoided to a certain extent. The compound controller based on disturbance observer （DOB） is composed of a feed-forward controller and a feedback controller. It estimates velocity and acceleration of unknown tracking signal, and also velocity response with an approximate method for differential. The experiments on a single-axis flight simulator show that the proposed method has strong robustness against parameter perturbations and external disturbances, owing to the introduced DOB. Compared with the scheme with ZPETC, the proposed scheme possesses more simple design and better tracking performance. Moreover, it is less sensitive to position command distortion of flight simulator.展开更多
Heat-resistant alloys with excellent mechanical properties are widely used in various fields,and further improvement in their properties is essential to meet the requirements in new-generation advanced supercritical b...Heat-resistant alloys with excellent mechanical properties are widely used in various fields,and further improvement in their properties is essential to meet the requirements in new-generation advanced supercritical boilers,nuclear reactors,superheaters,and other new materials applications.To effectively enhance the comprehensive performance of heat-resistant alloys,second-phase particle strengthening has been widely studied,and in the face of different service envi-ronments of advanced heat-resistant steels,the selection of suitable second-phase particles is essential to maximize the performance of these alloys.To this end,three major types of reinforcing phases in heat-resistant alloys such as carbides,rare earth oxides,and intermetallic compounds are summarized.A comparative analysis of the precipitation behavior of the reinforcing phases with different types as well as the risks and means of controlling their use in service,is presented.Key parameters for the application of various types of second-phase particles in heat-resistant alloys are provided to support the design and preparation of new ultrahigh-performance heat-resistant alloys.展开更多
TaB_(2)-SiC coating modified by different content of MoSi_(2) was fabricated on graphite substrate with SiC inner coating by liquid phase sintering to elevate the anti-oxidation capability of the TaB_(2)-SiC coatings....TaB_(2)-SiC coating modified by different content of MoSi_(2) was fabricated on graphite substrate with SiC inner coating by liquid phase sintering to elevate the anti-oxidation capability of the TaB_(2)-SiC coatings.As compared to the sample with the TaB_(2)-40wt% SiC coating,the coating sample modified with MoSi_(2) exhibited a weight gain trend at lower temperatures,the fastest weight loss rate went down by 76%,and the relative oxygen permeability value reduced from about 1% to near 0.More importantly,the large amount of SiO_(2) glass phase produced over the coating during oxidation was in contact with the modification of MoSi_(2),which was proved to be beneficial to the dispersion of Ta-oxides.A concomitantly formed continuous Ta-Si-O-B compound glass layer showed excellent capacity to prevent oxygen penetration.However,when the TaB_(2) content was sacrificed to increase the MoSi_(2) content,the relative oxygen permeability of the coating increased instead of decreased.Thus,on the basis of ample TaB_(2) content,increasing the MoSi_(2) content of the coating is conducive to reducing the relative oxygen permeability of the coatings in a broad temperature region.展开更多
基金This study is supported by Thousand Talents Program of Sichuan Province,the Open Project of State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials(17kffk01)Outstanding Young Scientific and Technical Talents in Sichuan Province(2019JDJQ0009)and the National Natural Science Foundation of China(No.51741208).
文摘Guided by the theoretical prediction,a new MAX phase V2SnC was synthesized experimentally for the first time by reaction of V,Sn,and C mixtures at 1000°C.The chemical composition and crystal structure of this new compound were identified by the cross-check combination of first-principles calculations,X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDS),and high resolution scanning transmission electron microscopy(HR-STEM).The stacking sequence of V2C and Sn layers results in a crystal structure of space group P63/mmc.The a-and c-lattice parameters,which were determined by the Rietveld analysis of powder XRD pattern,are 0.2981(0)nm and 1.3470(6)nm,respectively.The atomic positions are V at 4f(1/3,2/3,0.0776(5)),Sn at 2d(2/3,1/3,1/4),and C at 2a(0,0,0).A new set of XRD data of V2SnC was also obtained.Theoretical calculations suggest that this new compound is stable with negative formation energy and formation enthalpy,satisfied Born-Huang criteria of mechanical stability,and positive phonon branches over the Brillouin zone.It also has low shear deformation resistance c44(second-order elastic constant,cij)and shear modulus(G),positive Cauchy pressure,and low Pugh’s ratio(G/B=0.500<0.571),which is regarded as a quasi-ductile MAX phase.The mechanism underpinning the quasi-ductility is associated with the presence of a metallic bond.
基金Program for New Century Excellent Talents in University (NCET-07-0044)
文摘A compound controller is proposed to alleviate the considerable chattering in output of zero phase error tracking controller （ZPETC）, when the flight simulator losses command data of simulation signal. Besides, the shortcomings, caused by conventional differential methods in retrieving velocity and acceleration signals, are avoided to a certain extent. The compound controller based on disturbance observer （DOB） is composed of a feed-forward controller and a feedback controller. It estimates velocity and acceleration of unknown tracking signal, and also velocity response with an approximate method for differential. The experiments on a single-axis flight simulator show that the proposed method has strong robustness against parameter perturbations and external disturbances, owing to the introduced DOB. Compared with the scheme with ZPETC, the proposed scheme possesses more simple design and better tracking performance. Moreover, it is less sensitive to position command distortion of flight simulator.
基金The authors express their gratitude to the National Science Foundation for Young Scientists of China(51704021)Key Research and Development Projects of Shandong Province(2021CXGC010)+1 种基金Key Research and Development Projects of Sichuan Province(021YFG0114)Fundamental Research Funds for the Central Universities(FRF-IDRY-20-015,FRF-TP-20-004A3,FRF-TP-19-030A2,and FRF-TP-16-079A1)for their kind financial support.
文摘Heat-resistant alloys with excellent mechanical properties are widely used in various fields,and further improvement in their properties is essential to meet the requirements in new-generation advanced supercritical boilers,nuclear reactors,superheaters,and other new materials applications.To effectively enhance the comprehensive performance of heat-resistant alloys,second-phase particle strengthening has been widely studied,and in the face of different service envi-ronments of advanced heat-resistant steels,the selection of suitable second-phase particles is essential to maximize the performance of these alloys.To this end,three major types of reinforcing phases in heat-resistant alloys such as carbides,rare earth oxides,and intermetallic compounds are summarized.A comparative analysis of the precipitation behavior of the reinforcing phases with different types as well as the risks and means of controlling their use in service,is presented.Key parameters for the application of various types of second-phase particles in heat-resistant alloys are provided to support the design and preparation of new ultrahigh-performance heat-resistant alloys.
基金supported by the Fundamental Research Funds for the Central Universities(No.2018GF14).
文摘TaB_(2)-SiC coating modified by different content of MoSi_(2) was fabricated on graphite substrate with SiC inner coating by liquid phase sintering to elevate the anti-oxidation capability of the TaB_(2)-SiC coatings.As compared to the sample with the TaB_(2)-40wt% SiC coating,the coating sample modified with MoSi_(2) exhibited a weight gain trend at lower temperatures,the fastest weight loss rate went down by 76%,and the relative oxygen permeability value reduced from about 1% to near 0.More importantly,the large amount of SiO_(2) glass phase produced over the coating during oxidation was in contact with the modification of MoSi_(2),which was proved to be beneficial to the dispersion of Ta-oxides.A concomitantly formed continuous Ta-Si-O-B compound glass layer showed excellent capacity to prevent oxygen penetration.However,when the TaB_(2) content was sacrificed to increase the MoSi_(2) content,the relative oxygen permeability of the coating increased instead of decreased.Thus,on the basis of ample TaB_(2) content,increasing the MoSi_(2) content of the coating is conducive to reducing the relative oxygen permeability of the coatings in a broad temperature region.
