Numerical simulations of flow and heat transfer to supercritical RP-3 through the inclined tubes have been performed using LS k–e model embedded in Fluent. The physical properties of RP-3 were obtained using the gene...Numerical simulations of flow and heat transfer to supercritical RP-3 through the inclined tubes have been performed using LS k–e model embedded in Fluent. The physical properties of RP-3 were obtained using the generalized corresponding state laws based on the fourcomponent surrogate model. Mass flow rate is 0.3 g/s, system pressure is 3 MPa, inlet temperature is 373 K. Inclination of the inclined pipe varied from -90° to 90°, with heat flux varied from 300 k W/m^2 to 400 kW/m^2. Comparison between the calculated result and the experimental data indicates the range of error reasonable. The results of ±45° show that temperature inhomogeneity in inclined pipe produce the secondary flow in its cross section due to the buoyancy force. Depending on the strength of the temperature inhomogeneity, there will be two different forms of secondary flow and both contribute to the convective heat transfer in the pipe. The secondary flow intensity decreases when the inhomogeneity alleviates and thermal acceleration will play a leading role. It will have a greater impact on the turbulent flow to affect the convective heat transfer in the pipe. When changing the inclination, it affects the magnitude of the buoyant component in flow direction. The angle increases, the buoyancy component decreases. And the peak temperature of wall dominated by the secondary flow will move forward and increase in height.展开更多
In the present work, the microstructures of A356 feedstock cast via a pipe consisting of partial inclined and partial vertical sections were investigated. The experimental results indicate that semisolid feedstock wit...In the present work, the microstructures of A356 feedstock cast via a pipe consisting of partial inclined and partial vertical sections were investigated. The experimental results indicate that semisolid feedstock with ideal microstructures can be obtained at higher temperatures 645℃ and above by the proposed process, and the solid shell inside the pipe can be avoided at the optimum pouring temperature. Thus the process is attractive for industrial applications. The slanted angle of inclined section has an influence on the optimum pouring temperature. That is, the bigger the slanted angle, the higher the optimum pouring temperature, but accordingly, the greater the possibility of solid shell occurring inside the pipe. Therefore, small slanted angle should be considered first on the premise of ensuring a certain nucleation. The formation of semisolid feedstock is owed to the coactions of wall nucleation and stirring resulting from fluid flow. The inclined section greatly affects nucleation, and the vertical section has an important effect on both nucleation and generating stirring.展开更多
基金funding support from National Natural Science Foundation of China (No. 51876005)
文摘Numerical simulations of flow and heat transfer to supercritical RP-3 through the inclined tubes have been performed using LS k–e model embedded in Fluent. The physical properties of RP-3 were obtained using the generalized corresponding state laws based on the fourcomponent surrogate model. Mass flow rate is 0.3 g/s, system pressure is 3 MPa, inlet temperature is 373 K. Inclination of the inclined pipe varied from -90° to 90°, with heat flux varied from 300 k W/m^2 to 400 kW/m^2. Comparison between the calculated result and the experimental data indicates the range of error reasonable. The results of ±45° show that temperature inhomogeneity in inclined pipe produce the secondary flow in its cross section due to the buoyancy force. Depending on the strength of the temperature inhomogeneity, there will be two different forms of secondary flow and both contribute to the convective heat transfer in the pipe. The secondary flow intensity decreases when the inhomogeneity alleviates and thermal acceleration will play a leading role. It will have a greater impact on the turbulent flow to affect the convective heat transfer in the pipe. When changing the inclination, it affects the magnitude of the buoyant component in flow direction. The angle increases, the buoyancy component decreases. And the peak temperature of wall dominated by the secondary flow will move forward and increase in height.
基金supported by the National KeyBasic Research Foundation of China under grant No.2006CB605203the National Hi-Tech Research Founda-tion of China under grant No. 2006AA03Z115 the National Natural Science Foundation of China under grantNo.50774007.
文摘In the present work, the microstructures of A356 feedstock cast via a pipe consisting of partial inclined and partial vertical sections were investigated. The experimental results indicate that semisolid feedstock with ideal microstructures can be obtained at higher temperatures 645℃ and above by the proposed process, and the solid shell inside the pipe can be avoided at the optimum pouring temperature. Thus the process is attractive for industrial applications. The slanted angle of inclined section has an influence on the optimum pouring temperature. That is, the bigger the slanted angle, the higher the optimum pouring temperature, but accordingly, the greater the possibility of solid shell occurring inside the pipe. Therefore, small slanted angle should be considered first on the premise of ensuring a certain nucleation. The formation of semisolid feedstock is owed to the coactions of wall nucleation and stirring resulting from fluid flow. The inclined section greatly affects nucleation, and the vertical section has an important effect on both nucleation and generating stirring.
