The effect of step-quenching on the microstructure of aluminum alloy 7055 after artificial aging was studied by hardness testing and transmission electron microscopy (TEM). Step-quenching leads to decomposition of sol...The effect of step-quenching on the microstructure of aluminum alloy 7055 after artificial aging was studied by hardness testing and transmission electron microscopy (TEM). Step-quenching leads to decomposition of solid solution and heterogeneous precipitation of equilibrium phase mainly on dispersoids and at grain boundaries; thus lower hardness after aging. Prolonging isothermal holding at 415 ℃ results in coarser and more spaced η phase particles at grain boundaries with wider precipitates free zone, and lower density of larger η′ hardening precipitates inside grains after aging. Isothermal holding at 355 ℃ results in heterogeneous precipitation of η phase both on dispersoids and at grain boundaries. Isothermal holding at 235 ℃ results in heterogeneous precipitation of η phase first, and then S phase. Precipitates free zones are created around these coarse η and S phase particles after aging. Prolonging isothermal holding at these two temperatures leads to fewer η′ hardening precipitates inside grains, larger and more spaced η phase particles at grain boundaries and wider grain boundary precipitates free zone after aging.展开更多
The dynamic rheological measurements have been a preferred approach to the characterization of the structure and properties for multi-component or multi-phase polymer systems,due to its sensitive response to changes o...The dynamic rheological measurements have been a preferred approach to the characterization of the structure and properties for multi-component or multi-phase polymer systems,due to its sensitive response to changes of structure for these heterogeneous polymers.In the present article,recent progresses in the studies on dynamic rheology for heterogeneous polymer systems including polymeric composites filled with inorganic particles,thermo-oxidized polyolefins,phase- separated polymeric blends and functional polymers with the scaling and percolation behavior are reviewed,mainly depending on the results by the authors' group.By means of rheological measurements,not only some new fingerprints responsible for the evolution of morphology and structure concerning these polymer systems are obtained,the corresponding results are also significant for the design and preparation of novel polymer-based composites and functional materials.展开更多
This article briefly reviewed the advances in the process of the direct oxidation of methane to methanol （DMTM） with both heterogeneous and homogeneous oxidation. Attention was paid to the conversion of methane by t...This article briefly reviewed the advances in the process of the direct oxidation of methane to methanol （DMTM） with both heterogeneous and homogeneous oxidation. Attention was paid to the conversion of methane by the heterogeneous oxidation process with various transition metal ox‐ides. The most widely studied catalysts are based on molybdenum and iron. For the homogeneous gas phase oxidation, several process control parameters were discussed. Reactor design has the most crucial role in determining its commercialization. Compared to the above two systems, aque‐ous homogenous oxidation is an efficient route to get a higher yield of methanol. However, the cor‐rosive medium in this method and its serious environmental pollution hinder its widespread use. The key challenge to the industrial application is to find a green medium and highly efficient cata‐lysts.展开更多
The low-cost Fe-Cu,Fe-Ni,and Cu-based high-entropy alloys exhibit a widespread utilization prospect.However,these potential applications have been limited by their low strength.In this study,a novel Fe_(31)Cu_(31)Ni_(...The low-cost Fe-Cu,Fe-Ni,and Cu-based high-entropy alloys exhibit a widespread utilization prospect.However,these potential applications have been limited by their low strength.In this study,a novel Fe_(31)Cu_(31)Ni_(28)Al_(4)Ti_(3)Co_(3) immiscible high-entropy alloy(HEA)was developed.After vacuum arc melting and copper mold suction casting,this HEA exhibits a unique phase separation microstructure,which consists of striped Cu-rich regions and Fe-rich region.Further magnification of the striped Cu-rich region reveals that it is composed of a Cu-rich dot-like phase and a Fe-rich region.The aging alloy is further strengthened by a L1_(2)-Ni_(3)(AlTi)nanoprecipitates,achieving excellent yield strength(1185 MPa)and uniform ductility(~8.8%).The differential distribution of the L1_(2) nanoprecipitate in the striped Cu-rich region and the external Fe-rich region increased the strength difference between these two regions,which increased the strain gradient and thus improved hetero-deformation induced(HDI)hardening.This work provides a new route to improve the HDI hardening of Fe-Cu alloys.展开更多
This article addresses the leader-following output consensus problem of heterogeneous linear multi-agent systems with unknown agent parameters under directed graphs.The dynamics of followers are allowed to be non-mini...This article addresses the leader-following output consensus problem of heterogeneous linear multi-agent systems with unknown agent parameters under directed graphs.The dynamics of followers are allowed to be non-minimum phase with unknown arbitrary individual relative degrees.This is contrary to many existing works on distributed adaptive control schemes where agent dynamics are required to be minimum phase and often of the same relative degree.A distributed adaptive pole placement control scheme is developed,which consists of a distributed observer and an adaptive pole placement control law.It is shown that under the proposed distributed adaptive control scheme,all signals in the closed-loop system are bounded and the outputs of all the followers track the output of the leader asymptotically.The effectiveness of the proposed scheme is demonstrated by one practical example and one numerical example.展开更多
Chemical heterogeneity in high-temperature austenite is an effective way to tune the austenite-to-martensite transformation during cooling.The effect of quenching temperature on microstructure evolution is investigate...Chemical heterogeneity in high-temperature austenite is an effective way to tune the austenite-to-martensite transformation during cooling.The effect of quenching temperature on microstructure evolution is investigated when the high-temperature austenite is heterogeneous.After fast austenitization from partitioned pearlite consisting of Mn-enriched cementite and Mn-depleted ferrite in Fe-0.29C-3.76Mn-1.50Si(wt.%)steel,quenching to room temperature and quenching to 130℃ followed by 400℃ partitioning are both applied.With increasing quenching temperature from 25 to 130℃,the amount of heterogeneous microstructure(lamellar ghost pearlite)increases from 10.6%to 33.6% and the thickness of Mn-enriched retained austenite film is increased from 31.9±5.9 to 51.5±4.4 nm,indicating an enhancement of chemical patterning.It is probably ascribed to the reduction in driving force for austenite-to-martensite transformation,which requires a lower Mn content for austenite retention.展开更多
基金Project(2005CB623706) supported by the National Basic Research Program of China
文摘The effect of step-quenching on the microstructure of aluminum alloy 7055 after artificial aging was studied by hardness testing and transmission electron microscopy (TEM). Step-quenching leads to decomposition of solid solution and heterogeneous precipitation of equilibrium phase mainly on dispersoids and at grain boundaries; thus lower hardness after aging. Prolonging isothermal holding at 415 ℃ results in coarser and more spaced η phase particles at grain boundaries with wider precipitates free zone, and lower density of larger η′ hardening precipitates inside grains after aging. Isothermal holding at 355 ℃ results in heterogeneous precipitation of η phase both on dispersoids and at grain boundaries. Isothermal holding at 235 ℃ results in heterogeneous precipitation of η phase first, and then S phase. Precipitates free zones are created around these coarse η and S phase particles after aging. Prolonging isothermal holding at these two temperatures leads to fewer η′ hardening precipitates inside grains, larger and more spaced η phase particles at grain boundaries and wider grain boundary precipitates free zone after aging.
基金This work was supported by the National Natural Science Foundation for Distinguished Young Scholars(No.50125312)Key Program of National Science Foundation of China(No.50133020)National Natural Science Foundation of China(No.50373037)
文摘The dynamic rheological measurements have been a preferred approach to the characterization of the structure and properties for multi-component or multi-phase polymer systems,due to its sensitive response to changes of structure for these heterogeneous polymers.In the present article,recent progresses in the studies on dynamic rheology for heterogeneous polymer systems including polymeric composites filled with inorganic particles,thermo-oxidized polyolefins,phase- separated polymeric blends and functional polymers with the scaling and percolation behavior are reviewed,mainly depending on the results by the authors' group.By means of rheological measurements,not only some new fingerprints responsible for the evolution of morphology and structure concerning these polymer systems are obtained,the corresponding results are also significant for the design and preparation of novel polymer-based composites and functional materials.
基金supported by the Petrochemical Joint Funds of NSFC-CNPC (U1362202)the Postgraduate Innovation Project of China University of Petroleum (East China) (YCXJ2016030)~~
文摘This article briefly reviewed the advances in the process of the direct oxidation of methane to methanol （DMTM） with both heterogeneous and homogeneous oxidation. Attention was paid to the conversion of methane by the heterogeneous oxidation process with various transition metal ox‐ides. The most widely studied catalysts are based on molybdenum and iron. For the homogeneous gas phase oxidation, several process control parameters were discussed. Reactor design has the most crucial role in determining its commercialization. Compared to the above two systems, aque‐ous homogenous oxidation is an efficient route to get a higher yield of methanol. However, the cor‐rosive medium in this method and its serious environmental pollution hinder its widespread use. The key challenge to the industrial application is to find a green medium and highly efficient cata‐lysts.
基金Projects(52001083,52171111,U2141207)supported by the National Natural Science Foundation of ChinaProject(LH2020E060)supported by the Natural Science Foundation of Heilongjiang,China。
文摘The low-cost Fe-Cu,Fe-Ni,and Cu-based high-entropy alloys exhibit a widespread utilization prospect.However,these potential applications have been limited by their low strength.In this study,a novel Fe_(31)Cu_(31)Ni_(28)Al_(4)Ti_(3)Co_(3) immiscible high-entropy alloy(HEA)was developed.After vacuum arc melting and copper mold suction casting,this HEA exhibits a unique phase separation microstructure,which consists of striped Cu-rich regions and Fe-rich region.Further magnification of the striped Cu-rich region reveals that it is composed of a Cu-rich dot-like phase and a Fe-rich region.The aging alloy is further strengthened by a L1_(2)-Ni_(3)(AlTi)nanoprecipitates,achieving excellent yield strength(1185 MPa)and uniform ductility(~8.8%).The differential distribution of the L1_(2) nanoprecipitate in the striped Cu-rich region and the external Fe-rich region increased the strength difference between these two regions,which increased the strain gradient and thus improved hetero-deformation induced(HDI)hardening.This work provides a new route to improve the HDI hardening of Fe-Cu alloys.
基金This work was supported by Research Grants Council of Hong Kong(CityU-11205221).
文摘This article addresses the leader-following output consensus problem of heterogeneous linear multi-agent systems with unknown agent parameters under directed graphs.The dynamics of followers are allowed to be non-minimum phase with unknown arbitrary individual relative degrees.This is contrary to many existing works on distributed adaptive control schemes where agent dynamics are required to be minimum phase and often of the same relative degree.A distributed adaptive pole placement control scheme is developed,which consists of a distributed observer and an adaptive pole placement control law.It is shown that under the proposed distributed adaptive control scheme,all signals in the closed-loop system are bounded and the outputs of all the followers track the output of the leader asymptotically.The effectiveness of the proposed scheme is demonstrated by one practical example and one numerical example.
基金Zhi-ping Xiong thanks the financial support from the National Natural Science Foundation of China(52271004 and 51901021)the"Beijing Institute of Technology Research Fund Program for Young Scholars".
文摘Chemical heterogeneity in high-temperature austenite is an effective way to tune the austenite-to-martensite transformation during cooling.The effect of quenching temperature on microstructure evolution is investigated when the high-temperature austenite is heterogeneous.After fast austenitization from partitioned pearlite consisting of Mn-enriched cementite and Mn-depleted ferrite in Fe-0.29C-3.76Mn-1.50Si(wt.%)steel,quenching to room temperature and quenching to 130℃ followed by 400℃ partitioning are both applied.With increasing quenching temperature from 25 to 130℃,the amount of heterogeneous microstructure(lamellar ghost pearlite)increases from 10.6%to 33.6% and the thickness of Mn-enriched retained austenite film is increased from 31.9±5.9 to 51.5±4.4 nm,indicating an enhancement of chemical patterning.It is probably ascribed to the reduction in driving force for austenite-to-martensite transformation,which requires a lower Mn content for austenite retention.
