Transmission electron microscopy (TEM) was applied to investigate theevolution of dislocation configuration and strain induced precipitation behavior during relaxationprocess after deformation in Fe-Ni-Nb-Ti-C-B alloy...Transmission electron microscopy (TEM) was applied to investigate theevolution of dislocation configuration and strain induced precipitation behavior during relaxationprocess after deformation in Fe-Ni-Nb-Ti-C-B alloy. Experimental results indicate that thedislocation density is very high and distribute randornly before relaxation. As the relaxation timeincreasing, dislocation cells will form gradually by polygonization. The strain inducedprecipitation retards the progress. In the final relaxation stage, most dislocations get rid ofpinning of precipitates and the cells have developed into subgrains with large size.展开更多
The observations of dislocations, substructures and other microstructural details were conducted mainly by means of transmission electron microscope (TEM) and scanning electron microscope (SEM) for 12CrlMoV pearlitic ...The observations of dislocations, substructures and other microstructural details were conducted mainly by means of transmission electron microscope (TEM) and scanning electron microscope (SEM) for 12CrlMoV pearlitic heat-resistant steel. It is shown that during the high temperature long-term aging, the disordered and jumbled phase-transformed dislocations caused by normalized cooling are recovered and rearranged into cell substructures, and then the dislocation density is reduced gradually. Finally a low density linear dislocation configuration and a stabler dislocation network are formed and ferritic grains grow considerably.展开更多
The coupling effects of ultrasonic excitation and high-strain-rate deformation are the core factors for weld formation during ultrasonic welding.However,interfacial deformation behavior still shrouds in uncer-tainty b...The coupling effects of ultrasonic excitation and high-strain-rate deformation are the core factors for weld formation during ultrasonic welding.However,interfacial deformation behavior still shrouds in uncer-tainty because of the contradictory features between mutual dislocation retardation caused by severely frictional deformation and ultrasonic-accelerated dislocation motion.[101]and[111]-oriented Cu single crystals which tended to form geometrically necessary boundaries(GNBs)were selected as the welding substrates to trace the uniquely acoustoplastic effects in the interfacial region under the ultrasonically excited high-strain-rate deformation.It was indicated that for a low energy input,micro-welds localized at the specific interface region,and equiaxed dislocation cells substituting for GNBs dominated in the ini-tial single crystal rotation region.As the welding energy increased,continuous shear deformation drove the dynamic recrystallization region covered by equiaxed grains to spread progressively.Limited discrete dislocations inside the recrystallized grains and nascent dislocation cells at the grain boundaries were ob-served in[101]and[111]joints simultaneously,suggesting that the ultrasonic excitation promoted motion of intragranular dislocation and pile-up along the sub-grain boundaries.The interfacial morphology be-fore and after expansion of recrystallization region all exhibited the weakening of orientation constraint on dislocation motion,which was also confirmed by the similar micro-hardness in joint interface.The first-principle calculation and applied strain-rate analysis further revealed that ultrasonic excitation en-hanced dislocation slipping,and enabled dislocation motion to accommodate severe plastic deformation at a high-strain-rate.展开更多
With the development of aerospace and transportation,high-strength structural materials manufactured by additive manufacturing techniques get more attention,which allows the production of counterparts with complex str...With the development of aerospace and transportation,high-strength structural materials manufactured by additive manufacturing techniques get more attention,which allows the production of counterparts with complex structures.This work investigates Al-added CoCrFeMnNi high-entropy alloys(Al-HEAs)pre-pared by laser powder bed fusion(PBF-LB),adding 4.4 wt.%Al reducing approximately 7%density.The contribution of post-heat-treatment to microstructure,mechanical properties,and corrosion behaviors are explored.Hot cracking along with grain boundaries in the as-built PBF-LB Al-HEAs is determined,which comes from the residual liquid film as a larger solidification temperature range by adding Al.The PBF-LB Al-HEAs mainly consist of a face-centered cubic(FCC)matrix with Al/Ni/Mn decorated dislocation cells therein and a minor body-centered cubic(BCC)phase.Upon 850℃ annealing treatment,massive BCC phases(ordered NiAl and disordered Cr-rich precipitates)generate at the dislocation cell/grain bound-aries and the dislocation cells are still retained.However,the volume fraction of BCC phases and the dislocation cells vanish after 1150℃ solution treatment.As a result,Al-HEA850 shows an over 1000 MPa yield strength with nearly no ductility(<3%);the Al-HEA1150 exhibits considerable strength-ductility properties.Meanwhile,the Al-HEA850 demonstrates the worst pitting corrosion resistance due to the preferential dissolution of the NiAl precipitates in chloride-containing solutions.After comparatively de-liberating the evolution of strength-ductility and localized corrosion,we built a framework about the effects of the heat treatment on the mechanical property and degradation behavior in additively manu-factured Al-added high-strength HEAs.展开更多
The microstructural evolution of AA7055 aluminum alloy under dynamic impact loading with the strain rate of 1.3 × 10^4 s^-1 controlled by a split Hopkinson pressure bar was investigated, and compared with that un...The microstructural evolution of AA7055 aluminum alloy under dynamic impact loading with the strain rate of 1.3 × 10^4 s^-1 controlled by a split Hopkinson pressure bar was investigated, and compared with that under quasi-static mechanical loading in compression with strain rate of 1.0 × 10^-3 s^-1. The quasi-static-compressed sample exhibited equiaxed dislocation cells, which were different from the elongated and incomplete dislocation cells for the alloy undergoing dynamic compression. The high strain-rate compression also induced the formation of localized shear bands in which the recrystallizations characterized as fine equiaxed grains were observed. The microstructural evolutions under both quasi-static and dynamic compressions are rationalized in terms of the dislocation cell model combined with the dislocation kinetics, in addition to the adiabatic temperature rise in shear bands at high strain rate.展开更多
The alteration of dislocation arrays in the process of strain hardening for normalized carbon steel 1035 was investigated by transmission electron microscopy. At primary stage the separated dislocation lines tend to ...The alteration of dislocation arrays in the process of strain hardening for normalized carbon steel 1035 was investigated by transmission electron microscopy. At primary stage the separated dislocation lines tend to form tangles and networks, dislocation cells appear at the secondary stage, the amount of the cells increases significantly, its average dimension does not change and the cell walls become clear. The third stage of strain hardening was observed in the process from necking to fracture and shows a straight line segment on the lg σ -lg ε curve, at this time the dislocation cells become smaller and tend to form band structure.展开更多
304 austenitic stainless steel was cold rolled in the range of 20%-80%reductions and then annealed at 700-900°C for 60 sto obtain nano/ultrafine-grained（NG/UFG）structure.Transmission electron microscopy,electro...304 austenitic stainless steel was cold rolled in the range of 20%-80%reductions and then annealed at 700-900°C for 60 sto obtain nano/ultrafine-grained（NG/UFG）structure.Transmission electron microscopy,electron backscatter diffraction and X-ray diffraction were used to characterize the resulting microstructures.The results showed that with the increase of cold reduction,the content of martensite was increased.The steel performed work hardening during cold-working owing to the occurrence of strain induced martensite which nucleated in single shear bands.Further rolling broke up the lath-type martensite into dislocation-cell type martensite because of the formation of slip bands.Samples annealed at 800-960°C for 60 swere of NG/UFG structure with different percentage of nanocrystalline（60-100 nm）and ultrafine（100-500 nm）grains,submicron size（500-1000 nm）grains and micron size（〉1000 nm）grains.The value of the Gibbs free energy exhibited that the reversion mechanism of the reversion process was shear controlled by the annealing temperature.For a certain annealing time during the reversion process,austenite nucleated first on dislocation-cell type martensite and the grains grew up subsequently and eventually to be micrometer/submicrometer grains,while the nucleation of austenite on lath-type martensite occurred later resulting in nanocrystalline/ultrafine grains.The existence of the NG/UFG structure led to a higher strength and toughness during tensile test.展开更多
基金The work was financially supported by National Key Basic Research and Development Program of China(No.G1998061507).]
文摘Transmission electron microscopy (TEM) was applied to investigate theevolution of dislocation configuration and strain induced precipitation behavior during relaxationprocess after deformation in Fe-Ni-Nb-Ti-C-B alloy. Experimental results indicate that thedislocation density is very high and distribute randornly before relaxation. As the relaxation timeincreasing, dislocation cells will form gradually by polygonization. The strain inducedprecipitation retards the progress. In the final relaxation stage, most dislocations get rid ofpinning of precipitates and the cells have developed into subgrains with large size.
基金supported by the Natural Science Foundation of Gansu Province(No.ZS001-A22-046-C).
文摘The observations of dislocations, substructures and other microstructural details were conducted mainly by means of transmission electron microscope (TEM) and scanning electron microscope (SEM) for 12CrlMoV pearlitic heat-resistant steel. It is shown that during the high temperature long-term aging, the disordered and jumbled phase-transformed dislocations caused by normalized cooling are recovered and rearranged into cell substructures, and then the dislocation density is reduced gradually. Finally a low density linear dislocation configuration and a stabler dislocation network are formed and ferritic grains grow considerably.
基金supported by the National Nat-ural Science Foundation of China(No.52175310)A part of the work was also supported by the National Science and Technology Major Project(No.2017-VI-0009-0080)+1 种基金the Guang-dong Province Key Research and Development Program(No.2019B010935001)and the Shenzhen Science and Technology Plan(No.GXWD20201230155427003-20200821172456002).
文摘The coupling effects of ultrasonic excitation and high-strain-rate deformation are the core factors for weld formation during ultrasonic welding.However,interfacial deformation behavior still shrouds in uncer-tainty because of the contradictory features between mutual dislocation retardation caused by severely frictional deformation and ultrasonic-accelerated dislocation motion.[101]and[111]-oriented Cu single crystals which tended to form geometrically necessary boundaries(GNBs)were selected as the welding substrates to trace the uniquely acoustoplastic effects in the interfacial region under the ultrasonically excited high-strain-rate deformation.It was indicated that for a low energy input,micro-welds localized at the specific interface region,and equiaxed dislocation cells substituting for GNBs dominated in the ini-tial single crystal rotation region.As the welding energy increased,continuous shear deformation drove the dynamic recrystallization region covered by equiaxed grains to spread progressively.Limited discrete dislocations inside the recrystallized grains and nascent dislocation cells at the grain boundaries were ob-served in[101]and[111]joints simultaneously,suggesting that the ultrasonic excitation promoted motion of intragranular dislocation and pile-up along the sub-grain boundaries.The interfacial morphology be-fore and after expansion of recrystallization region all exhibited the weakening of orientation constraint on dislocation motion,which was also confirmed by the similar micro-hardness in joint interface.The first-principle calculation and applied strain-rate analysis further revealed that ultrasonic excitation en-hanced dislocation slipping,and enabled dislocation motion to accommodate severe plastic deformation at a high-strain-rate.
基金This work is financially supported by the Shanghai Sailing Program(No.21YF1412000)the Natural Science Foundation of Shanghai(No.19ZR1417100).The authors greatly appreciate the access to Thermo-calc software in Prof.Olson’s lab at MIT.
文摘With the development of aerospace and transportation,high-strength structural materials manufactured by additive manufacturing techniques get more attention,which allows the production of counterparts with complex structures.This work investigates Al-added CoCrFeMnNi high-entropy alloys(Al-HEAs)pre-pared by laser powder bed fusion(PBF-LB),adding 4.4 wt.%Al reducing approximately 7%density.The contribution of post-heat-treatment to microstructure,mechanical properties,and corrosion behaviors are explored.Hot cracking along with grain boundaries in the as-built PBF-LB Al-HEAs is determined,which comes from the residual liquid film as a larger solidification temperature range by adding Al.The PBF-LB Al-HEAs mainly consist of a face-centered cubic(FCC)matrix with Al/Ni/Mn decorated dislocation cells therein and a minor body-centered cubic(BCC)phase.Upon 850℃ annealing treatment,massive BCC phases(ordered NiAl and disordered Cr-rich precipitates)generate at the dislocation cell/grain bound-aries and the dislocation cells are still retained.However,the volume fraction of BCC phases and the dislocation cells vanish after 1150℃ solution treatment.As a result,Al-HEA850 shows an over 1000 MPa yield strength with nearly no ductility(<3%);the Al-HEA1150 exhibits considerable strength-ductility properties.Meanwhile,the Al-HEA850 demonstrates the worst pitting corrosion resistance due to the preferential dissolution of the NiAl precipitates in chloride-containing solutions.After comparatively de-liberating the evolution of strength-ductility and localized corrosion,we built a framework about the effects of the heat treatment on the mechanical property and degradation behavior in additively manu-factured Al-added high-strength HEAs.
基金financially supported by the National Basic Research Program of China (No.G2011CB012806)
文摘The microstructural evolution of AA7055 aluminum alloy under dynamic impact loading with the strain rate of 1.3 × 10^4 s^-1 controlled by a split Hopkinson pressure bar was investigated, and compared with that under quasi-static mechanical loading in compression with strain rate of 1.0 × 10^-3 s^-1. The quasi-static-compressed sample exhibited equiaxed dislocation cells, which were different from the elongated and incomplete dislocation cells for the alloy undergoing dynamic compression. The high strain-rate compression also induced the formation of localized shear bands in which the recrystallizations characterized as fine equiaxed grains were observed. The microstructural evolutions under both quasi-static and dynamic compressions are rationalized in terms of the dislocation cell model combined with the dislocation kinetics, in addition to the adiabatic temperature rise in shear bands at high strain rate.
文摘The alteration of dislocation arrays in the process of strain hardening for normalized carbon steel 1035 was investigated by transmission electron microscopy. At primary stage the separated dislocation lines tend to form tangles and networks, dislocation cells appear at the secondary stage, the amount of the cells increases significantly, its average dimension does not change and the cell walls become clear. The third stage of strain hardening was observed in the process from necking to fracture and shows a straight line segment on the lg σ -lg ε curve, at this time the dislocation cells become smaller and tend to form band structure.
基金supported by the National Natural Science Foundation of China(Grant No.51474031)
文摘304 austenitic stainless steel was cold rolled in the range of 20%-80%reductions and then annealed at 700-900°C for 60 sto obtain nano/ultrafine-grained（NG/UFG）structure.Transmission electron microscopy,electron backscatter diffraction and X-ray diffraction were used to characterize the resulting microstructures.The results showed that with the increase of cold reduction,the content of martensite was increased.The steel performed work hardening during cold-working owing to the occurrence of strain induced martensite which nucleated in single shear bands.Further rolling broke up the lath-type martensite into dislocation-cell type martensite because of the formation of slip bands.Samples annealed at 800-960°C for 60 swere of NG/UFG structure with different percentage of nanocrystalline（60-100 nm）and ultrafine（100-500 nm）grains,submicron size（500-1000 nm）grains and micron size（〉1000 nm）grains.The value of the Gibbs free energy exhibited that the reversion mechanism of the reversion process was shear controlled by the annealing temperature.For a certain annealing time during the reversion process,austenite nucleated first on dislocation-cell type martensite and the grains grew up subsequently and eventually to be micrometer/submicrometer grains,while the nucleation of austenite on lath-type martensite occurred later resulting in nanocrystalline/ultrafine grains.The existence of the NG/UFG structure led to a higher strength and toughness during tensile test.
