China＇s continental deposition basins are characterized by complex geological structures and various reservoir lithologies. Therefore, high precision exploration methods are needed. High density spatial sampling is a...China＇s continental deposition basins are characterized by complex geological structures and various reservoir lithologies. Therefore, high precision exploration methods are needed. High density spatial sampling is a new technology to increase the accuracy of seismic exploration. We briefly discuss point source and receiver technology, analyze the high density spatial sampling in situ method, introduce the symmetric sampling principles presented by Gijs J. O. Vermeer, and discuss high density spatial sampling technology from the point of view of wave field continuity. We emphasize the analysis of the high density spatial sampling characteristics, including the high density first break advantages for investigation of near surface structure, improving static correction precision, the use of dense receiver spacing at short offsets to increase the effective coverage at shallow depth, and the accuracy of reflection imaging. Coherent noise is not aliased and the noise analysis precision and suppression increases as a result. High density spatial sampling enhances wave field continuity and the accuracy of various mathematical transforms, which benefits wave field separation. Finally, we point out that the difficult part of high density spatial sampling technology is the data processing. More research needs to be done on the methods of analyzing and processing huge amounts of seismic data.展开更多
The electromagnetic field under applied AC and DC current in round and rectangular pipe was systematically investigated, then a concept of 'equivalent current density' was proposed for evaluating the inhomogen...The electromagnetic field under applied AC and DC current in round and rectangular pipe was systematically investigated, then a concept of 'equivalent current density' was proposed for evaluating the inhomogeneous electromagnetic pinch force, and the mono-component removal efficiency and the overall removal efficiency of inclusion were formulated. It is founded that flat pipe is superior to round pipe for the electromagnetic removal of inclusion, and DC current can get a higher removal efficiency than A C current due to absence of skin phenomenon. Under usual condition, a removal efficiency of 52% for 10μm inclusion or more than 92% for 20μm inclusion can be achieved by imposing a current density of 3×106A/m2 in a flat pipe.展开更多
In the near-shore waters, the actual flow is mainly induced by tide, wind and salinity, and the river water runoff should also be included as a component in the estuary waters. The interactions among these major compo...In the near-shore waters, the actual flow is mainly induced by tide, wind and salinity, and the river water runoff should also be included as a component in the estuary waters. The interactions among these major components are very complicated. Many approaches were proposed to study isolated tide and wind-driven currents or run-off based on the measured velocity, with all its components taken as a whole. In this article, firstly, based on the actual hydrodynamic characteristics of estuarine and coastal waters, an approach is proposed to separate the measured velocity by considering the theoretical current velocity profiles and using the least squares method. The vertical structures of tidal, wind-driven currents, density current and runoff can be obtained as well as their proportions in the measured velocity. Then, this approach is applied to the analysis of velocity data obtained in the North Branch of Yangtze River estuary and of laboratory test data. The results are found to be satisfactory. Finally, this approach is used to separate the measured velocity in the South Branch of Yangtze River estuary, to determine not only the bed friction velocity and roughness height, but also the surface wind stress, and to estimate the wind velocity data above the water surface. The results show that this method is simple in principle, practical in use, and reasonable in obtained results. So it can be used to effectively analyze the field data.展开更多
A three-part numerical investigation has been conducted in order to identify the flow separation behavior––the progression of the shock structure, the flow separation pattern with an increase in the nozzle pressure ...A three-part numerical investigation has been conducted in order to identify the flow separation behavior––the progression of the shock structure, the flow separation pattern with an increase in the nozzle pressure ratio（NPR）, the prediction of the separation data on the nozzle wall,and the influence of the gas density effect on the flow separation behavior are included.The computational results reveal that the annular conical aerospike nozzle is dominated by shock/shock and shock/boundary layer interactions at all calculated NPRs, and the shock physics and associated flow separation behavior are quite complex.An abnormal flow separation behavior as well as a transition process from no flow separation at highly over-expanded conditions to a restricted shock separation and finally to a free shock separation even at the deign condition can be observed.The complex shock physics has further influence on the separation data on both the spike and cowl walls, and separation criteria suggested by literatures developed from separation data in conical or bell-type rocket nozzles fail at the prediction of flow separation behavior in the present asymmetric supersonic nozzle.Correlation of flow separation with the gas density is distinct for highly overexpanded conditions.Decreasing the gas density or reducing mass flow results in a smaller adverse pressure gradient across the separation shock or a weaker shock system, and this is strongly coupled with the flow separation behavior.The computational results agree well with the experimental data in both shock physics and static wall pressure distribution at the specific NPRs, indicating that the computational methodology here is advisable to accurately predict the flow physics.展开更多
This study detects the presence of microplastics in the coastal areas of Borongan City, Eastern Samar, this specifically implies the microplastics present in the waters along coastal areas of Borongan City. Two (2) sa...This study detects the presence of microplastics in the coastal areas of Borongan City, Eastern Samar, this specifically implies the microplastics present in the waters along coastal areas of Borongan City. Two (2) sampling areas were identified and selected for the presence of these microcontaminants using density separation, filtration and microscopic identification. Results reveal a total of 35 microplastics observed from the water samples collected, with this the microplastics from Baybay boulevard with an average of 0.79 microplastics per Liter, while the average microplastic contamination in Hilangagan beach resort was calculated at 0.43 microplastics per Liter. This sums up to an average of 0.49 microplastics per Liter for both sampling sites in Borongan City.展开更多
文摘China＇s continental deposition basins are characterized by complex geological structures and various reservoir lithologies. Therefore, high precision exploration methods are needed. High density spatial sampling is a new technology to increase the accuracy of seismic exploration. We briefly discuss point source and receiver technology, analyze the high density spatial sampling in situ method, introduce the symmetric sampling principles presented by Gijs J. O. Vermeer, and discuss high density spatial sampling technology from the point of view of wave field continuity. We emphasize the analysis of the high density spatial sampling characteristics, including the high density first break advantages for investigation of near surface structure, improving static correction precision, the use of dense receiver spacing at short offsets to increase the effective coverage at shallow depth, and the accuracy of reflection imaging. Coherent noise is not aliased and the noise analysis precision and suppression increases as a result. High density spatial sampling enhances wave field continuity and the accuracy of various mathematical transforms, which benefits wave field separation. Finally, we point out that the difficult part of high density spatial sampling technology is the data processing. More research needs to be done on the methods of analyzing and processing huge amounts of seismic data.
文摘The electromagnetic field under applied AC and DC current in round and rectangular pipe was systematically investigated, then a concept of 'equivalent current density' was proposed for evaluating the inhomogeneous electromagnetic pinch force, and the mono-component removal efficiency and the overall removal efficiency of inclusion were formulated. It is founded that flat pipe is superior to round pipe for the electromagnetic removal of inclusion, and DC current can get a higher removal efficiency than A C current due to absence of skin phenomenon. Under usual condition, a removal efficiency of 52% for 10μm inclusion or more than 92% for 20μm inclusion can be achieved by imposing a current density of 3×106A/m2 in a flat pipe.
基金supported by the Public Welfare Projects of Ministry of Water Resources (Grant No.200701026)the National Natural Science Foundation of China (Grant Nos. 49971064, 50339010)
文摘In the near-shore waters, the actual flow is mainly induced by tide, wind and salinity, and the river water runoff should also be included as a component in the estuary waters. The interactions among these major components are very complicated. Many approaches were proposed to study isolated tide and wind-driven currents or run-off based on the measured velocity, with all its components taken as a whole. In this article, firstly, based on the actual hydrodynamic characteristics of estuarine and coastal waters, an approach is proposed to separate the measured velocity by considering the theoretical current velocity profiles and using the least squares method. The vertical structures of tidal, wind-driven currents, density current and runoff can be obtained as well as their proportions in the measured velocity. Then, this approach is applied to the analysis of velocity data obtained in the North Branch of Yangtze River estuary and of laboratory test data. The results are found to be satisfactory. Finally, this approach is used to separate the measured velocity in the South Branch of Yangtze River estuary, to determine not only the bed friction velocity and roughness height, but also the surface wind stress, and to estimate the wind velocity data above the water surface. The results show that this method is simple in principle, practical in use, and reasonable in obtained results. So it can be used to effectively analyze the field data.
文摘A three-part numerical investigation has been conducted in order to identify the flow separation behavior––the progression of the shock structure, the flow separation pattern with an increase in the nozzle pressure ratio（NPR）, the prediction of the separation data on the nozzle wall,and the influence of the gas density effect on the flow separation behavior are included.The computational results reveal that the annular conical aerospike nozzle is dominated by shock/shock and shock/boundary layer interactions at all calculated NPRs, and the shock physics and associated flow separation behavior are quite complex.An abnormal flow separation behavior as well as a transition process from no flow separation at highly over-expanded conditions to a restricted shock separation and finally to a free shock separation even at the deign condition can be observed.The complex shock physics has further influence on the separation data on both the spike and cowl walls, and separation criteria suggested by literatures developed from separation data in conical or bell-type rocket nozzles fail at the prediction of flow separation behavior in the present asymmetric supersonic nozzle.Correlation of flow separation with the gas density is distinct for highly overexpanded conditions.Decreasing the gas density or reducing mass flow results in a smaller adverse pressure gradient across the separation shock or a weaker shock system, and this is strongly coupled with the flow separation behavior.The computational results agree well with the experimental data in both shock physics and static wall pressure distribution at the specific NPRs, indicating that the computational methodology here is advisable to accurately predict the flow physics.
文摘This study detects the presence of microplastics in the coastal areas of Borongan City, Eastern Samar, this specifically implies the microplastics present in the waters along coastal areas of Borongan City. Two (2) sampling areas were identified and selected for the presence of these microcontaminants using density separation, filtration and microscopic identification. Results reveal a total of 35 microplastics observed from the water samples collected, with this the microplastics from Baybay boulevard with an average of 0.79 microplastics per Liter, while the average microplastic contamination in Hilangagan beach resort was calculated at 0.43 microplastics per Liter. This sums up to an average of 0.49 microplastics per Liter for both sampling sites in Borongan City.
