This paper investigates the steady-state thermoelastic problem of a circular nanohole embedded in an infinitely large elastic plane subjected to a uniform far-field heat flux.A lowly conductive surface model is used t...This paper investigates the steady-state thermoelastic problem of a circular nanohole embedded in an infinitely large elastic plane subjected to a uniform far-field heat flux.A lowly conductive surface model is used to account for the effects of surface phonon scattering,while the complete Gurtin–Murdoch model is utilized to characterize the effects of surface tension and surface elasticity.The closed-form solution to the temperature and stress field surrounding the hole is derived in the context of complex variable methods.Several numerical examples are presented to analyze the influence of surface effects on thermal stress fields.It is shown that surface effects induce notable increases in normal and shear stresses around the hole.Specifically,all three stress components(hoop,normal,and shear)in the vicinity of the hole exhibit substantial augmentation with increasing surface tension and surface modulus.In particular,it is found that the presence of surface effects amplifies the variation in stress gradients and intensifies stress concentration around the hole.展开更多
A high-order gas kinetic flux solver(GKFS)is presented for simulating inviscid compressible flows.The weighted essentially non-oscillatory(WENO)scheme on a uniform mesh in the finite volume formulation is combined wit...A high-order gas kinetic flux solver(GKFS)is presented for simulating inviscid compressible flows.The weighted essentially non-oscillatory(WENO)scheme on a uniform mesh in the finite volume formulation is combined with the circular function-based GKFS(C-GKFS)to capture more details of the flow fields with fewer grids.Different from most of the current GKFSs,which are constructed based on the Maxwellian distribution function or its equivalent form,the C-GKFS simplifies the Maxwellian distribution function into the circular function,which ensures that the Euler or Navier-Stokes equations can be recovered correctly.This improves the efficiency of the GKFS and reduces its complexity to facilitate the practical application of engineering.Several benchmark cases are simulated,and good agreement can be obtained in comparison with the references,which demonstrates that the high-order C-GKFS can achieve the desired accuracy.展开更多
We calculate the canonical angular momentum of a free electron, positron and gamma photon. We show that for any particle with charge q the canonical angular momentum (J<sub>c</sub>) is written as the summa...We calculate the canonical angular momentum of a free electron, positron and gamma photon. We show that for any particle with charge q the canonical angular momentum (J<sub>c</sub>) is written as the summation of the kinetic angular momentum (J<sub>kin</sub>) and the intrinsic quantum flux dependent terms. In terms of the z-components this can be written as . For a free electron (e<sup>-</sup>) and a positron (e<sup>+</sup>) depending on the spin orientation we find that:;;and respectively. Similarly for a gamma (γ) photon, propagating in z direction with an angular frequency ω, the canonical angular momentum is found to be: , here the (+) and (-) signs stand for the right and left hand circular helicity respectively.展开更多
Based on the principle of direct torque control,a DTC(Direct Torque Control)system with five-phase induction motor has been studied.Providing direct control of stator flux and electromagnetic torque by optimized volta...Based on the principle of direct torque control,a DTC(Direct Torque Control)system with five-phase induction motor has been studied.Providing direct control of stator flux and electromagnetic torque by optimized voltage vector,five-phase induction motor enhances flexibility of the invert states selection by increasing the number of voltage vectors,resulting in more precise control of stator flux and electromagnetic torque.The model of DTC for five-phase induction motor is constructed on equations and the method of approximate circle of torque track is used to conduct the simulation analysis of the system.The simulation results demonstrate that the DTC for five-phase induction motor control has merits of little calculation compared with vector control,simple structure,fast response and greater dynamic performance.展开更多
Flat plate pulsating heat pipe is useful for hot spot heat spreader. Two kinds of flat plate spreader of pulsating heat pipe are designed, fabricated and experimented. For the embedded circular capillary type, the tra...Flat plate pulsating heat pipe is useful for hot spot heat spreader. Two kinds of flat plate spreader of pulsating heat pipe are designed, fabricated and experimented. For the embedded circular capillary type, the transferred heat flux could reach 32 W/cm2, the smallest thermal resistance for acetone, methanol and FC-72 were respectively 0.50, 0.57 and 0.40℃/W. While for the square capillary type, the transferred heat flux could reach 26 W/cm2, the equivalent thermal conductivity could reach 3211 W/（m. ℃）. There are ranges of optimal transferred power and filling ratio for different working liquid. If the transferred power is constant, changing the heating area and the place has little effects on the performance.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.11902116)the Natural Science Foundation of Guangdong Province(Grant No.2022A1515011773)the Natural Science Foundation of Guangzhou City(Grant No.202201010317).
文摘This paper investigates the steady-state thermoelastic problem of a circular nanohole embedded in an infinitely large elastic plane subjected to a uniform far-field heat flux.A lowly conductive surface model is used to account for the effects of surface phonon scattering,while the complete Gurtin–Murdoch model is utilized to characterize the effects of surface tension and surface elasticity.The closed-form solution to the temperature and stress field surrounding the hole is derived in the context of complex variable methods.Several numerical examples are presented to analyze the influence of surface effects on thermal stress fields.It is shown that surface effects induce notable increases in normal and shear stresses around the hole.Specifically,all three stress components(hoop,normal,and shear)in the vicinity of the hole exhibit substantial augmentation with increasing surface tension and surface modulus.In particular,it is found that the presence of surface effects amplifies the variation in stress gradients and intensifies stress concentration around the hole.
基金Project supported by the National Natural Science Foundation of China(No.12072158)。
文摘A high-order gas kinetic flux solver(GKFS)is presented for simulating inviscid compressible flows.The weighted essentially non-oscillatory(WENO)scheme on a uniform mesh in the finite volume formulation is combined with the circular function-based GKFS(C-GKFS)to capture more details of the flow fields with fewer grids.Different from most of the current GKFSs,which are constructed based on the Maxwellian distribution function or its equivalent form,the C-GKFS simplifies the Maxwellian distribution function into the circular function,which ensures that the Euler or Navier-Stokes equations can be recovered correctly.This improves the efficiency of the GKFS and reduces its complexity to facilitate the practical application of engineering.Several benchmark cases are simulated,and good agreement can be obtained in comparison with the references,which demonstrates that the high-order C-GKFS can achieve the desired accuracy.
文摘We calculate the canonical angular momentum of a free electron, positron and gamma photon. We show that for any particle with charge q the canonical angular momentum (J<sub>c</sub>) is written as the summation of the kinetic angular momentum (J<sub>kin</sub>) and the intrinsic quantum flux dependent terms. In terms of the z-components this can be written as . For a free electron (e<sup>-</sup>) and a positron (e<sup>+</sup>) depending on the spin orientation we find that:;;and respectively. Similarly for a gamma (γ) photon, propagating in z direction with an angular frequency ω, the canonical angular momentum is found to be: , here the (+) and (-) signs stand for the right and left hand circular helicity respectively.
文摘Based on the principle of direct torque control,a DTC(Direct Torque Control)system with five-phase induction motor has been studied.Providing direct control of stator flux and electromagnetic torque by optimized voltage vector,five-phase induction motor enhances flexibility of the invert states selection by increasing the number of voltage vectors,resulting in more precise control of stator flux and electromagnetic torque.The model of DTC for five-phase induction motor is constructed on equations and the method of approximate circle of torque track is used to conduct the simulation analysis of the system.The simulation results demonstrate that the DTC for five-phase induction motor control has merits of little calculation compared with vector control,simple structure,fast response and greater dynamic performance.
文摘Flat plate pulsating heat pipe is useful for hot spot heat spreader. Two kinds of flat plate spreader of pulsating heat pipe are designed, fabricated and experimented. For the embedded circular capillary type, the transferred heat flux could reach 32 W/cm2, the smallest thermal resistance for acetone, methanol and FC-72 were respectively 0.50, 0.57 and 0.40℃/W. While for the square capillary type, the transferred heat flux could reach 26 W/cm2, the equivalent thermal conductivity could reach 3211 W/（m. ℃）. There are ranges of optimal transferred power and filling ratio for different working liquid. If the transferred power is constant, changing the heating area and the place has little effects on the performance.
